EDGEBANDER DUA SISI

HOMAG KAL 526 /5/A3/25/S2

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub-spindle power: 18.5 kW / 11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm / 2000 mm / 1800 mm, weight: approx. 4750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. Inspection on site possible. Ledpsv Scrhofx Alkerk

Kondisi: bekas, nomor mesin/kendaraan: 008127, Posisi 1: Mesin pelapis tepi satu sisi BIESSE + FORMETAL-AKRON 1440 A Posisi 2: Sistem pengembalian panel BIESSE + FORMETAL-AKRON 1440 A Lrjdpfxow Tq Iwe Alkek

Kondisi: sangat baik (bekas), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with its own pump) No. 4 vertical support columns for the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley, to which horizontal arms are connected No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 floor rollers for feeding panel stacks into the Loader No. 1 motorized roller table that feeds panels to the Unloader, also equipped with several crosswise motorized conveyor belts (at 90°). Approx. dimensions: 7232 mm. Separate electrical and control panel OMRON electronic control Perimeter safety and protection metal fences Lredpfx Alod Rg Dpskek Working capacity (cycles/minute): approx. 16 - 20 Min./max. panel thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Kondisi: baik (bekas), Tahun pembuatan: 2003, nomor mesin/kendaraan: 129-41, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 360 mm, jumlah slot dalam magazin alat: 48, produsen pengendali: Siemens, lebar meja: 260 mm, model controller: 840D, tinggi meja: 540 mm, Perlengkapan: konveyor serpihan, - Spindle 12,000 rpm Lsdpfetyx Npsx Alkerk - 48 tool stations in chain magazine (chain and guides replaced in 2021) - Tool holder HSK A63

Tahun pembuatan: 2020, Kondisi: baru, The deaerator is used for the removal of air bubbles from the purée. The air bubbles mix with the purée during the sieving process. Lrsdpfxecl Tt Rj Alksk Constructed from stainless steel. Deaeration occurs in a vacuum vessel. Operating temperature is approximately 50°C. A water ring pump is integrated to generate vacuum within the tank. The purée is drawn in by the pasteurizer pump. Level sensors are included, allowing the measurement of liquid inflow and outflow. Power supply: 400V / 50 Hz / 16A Power consumption: 2.2 kilowatts Water supply: approx. 100 l/h

Kondisi: sangat baik (bekas), CHIRON DZ 18.2 KW, Lrjdpfx Aleuviiwekjk Year of manufacture: 2012 Control: Fanuc 31i Travel (X / Y / Z): 630 x 520 x 400 mm Pallet changer: 2x 940 x 470 mm 2 spindles Spindle distance: 320 mm 2×32-position tool changers Tool holder: SK40 Max. spindle speed: 10,000 rpm

Kondisi: bekas, Machine has a fault in the main spindle. CNC Vertical Machining Centre CHIRON Type FZ 22 L high speed Machining centre with CNC control FANUC Series 21-M Serial No. 179-98 Year of manufacture: 1999 Travel distances X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load capacity 525 kg (per meter) Tool holder SK 40 (DIN 69871) Lrjdequhbgepfx Alkjk Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free adjacent stations 105 mm Tool change time tool-to-tool 2.0 sec. Tool change time chip-to-chip 4.8 sec. Distance spindle nose – table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Power supply 400 Volt, 50 Hz, 32 kVA - Pendulum machining via 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - 40-position tool changer - Through spindle coolant (IKZ) - Splash guard cabin with sliding door - Indirect path measurement system - Coolant unit with chip conveyor adjacent - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Machine weight approx. 7.5 tons Transport dimensions for the truck L x W x H 12000 x 2470 x 2950 mm Transport weight on the truck approx. 10 tons Weight 7.2 tons Good condition – machine has a fault in the main spindle.

Kondisi: bekas, Tahun pembuatan: 2009, Numerical control unit POWER CONTROL PC 22 Machine suitable for the 1st and 2nd processing pass of the panel Mobile, NC-controlled shoulder opening, motorized, 3000 mm Maximum panel height: 60 mm Ljdpfxopp Tkfe Alkjrk PVC-ABS edge thickness: 3 mm Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Motorized rubber pressure belt Support rail with retractable pin (distance between pins: 500 mm) Squaring section consisting of: Anti-adhesive unit Time-controlled, automatic chip protection unit Double trimming unit Provision for group extension at each station Glue application unit with premelter and glue pot Automatic adjustment of edge pressure rollers Edge holder magazine with 2 positions End trimming unit with two motors Overlap cutting unit Corner rounding unit (FK group) Edge scraper unit Glue scraper unit Buffing unit Anti-adhesive unit

Tahun pembuatan: 1996, Kondisi: sangat baik (bekas), I am selling a double-end profiling milling machine EGURKO ORTZA PDA 56/2. Working width: 200 to 3000 mm Configuration left side / fixed: 3 swiveling side milling units Configuration right side / movable: 3 swiveling side milling units Material pressure belt with overhead feed. Throughfeed machine. Ljdpfx Alsizrf Nekerk Condition: Very good. Available immediately. Installed and ready to run immediately. Price per piece. 2 units in stock and available.

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), I am offering for sale a Biesse production line consisting of: - COMIL Insider dowel insertion machine - Drilling, grooving, dowel insertion, glue application, accessory insertion units - Complete line Year of manufacture: 1999-2001. It is possible to sell the machines separately. Lredsd Iv H Rjpfx Alkok Vibration feeders and motorised conveyors are included in the offer. For more photos and details, please send an enquiry.