Mesin pengikat tepi satu sisi

HOMAG KAL 610/23/DE

Kondisi: bekas, nomor mesin/kendaraan: 006252, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, PUR Jointing unit: yes Multifunction unit: yes Lsdpfx Adjwcyckjwjai Max. feed speed: 40 m/min Maximum panel thickness: 60 mm Working units: 10 pcs

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Laodpfsflc Uhox Adwei Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Upper pressure: driven by V-belt Spraying unit (for liquid release agent) Jointing cutter unit 08.376 (2 x 3 kW) Gluing unit (hot-melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (no. of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (2 x 0.66 kW) Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: sangat baik (bekas), ROLLER COATING MACHINE (REVERSE) Max. working width: 1300 mm Total machine length approx.: 1600 mm Integrated control cabinet with operator panel Powered conveyor belt for workpiece feed (with servo controller, estimated power 0.75 kW) Feed speed: 6 m/min to 24 m/min Total connected load approx.: 4.1 kW Equipped with 2 work stations: * 1st unit (with 2 rollers) Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, with 2 speed controllers (power 0.37 kW + 0.75 kW), with rubber-coated counter roller underneath Lodpfx Adsidqwpewoai * 2nd unit (with 2 rollers) Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, with 2 speed controllers (power 0.37 kW + 0.75 kW), with rubber-coated counter roller underneath

Kondisi: baru, Tahun pembuatan: 2025, Arbeitsbereich: 6100 mm x 1524 mm / 4000 mm x 1524 mm / 3048 mm x 1524 mm Laserleistung: 3000 W / 2000 W / 1500 W / 1000 W Positioniergenauigkeit: ±0,05 mm Wiederholgenauigkeit: ±0,03 mm Max. Verfahrgeschwindigkeit: 91 m/min Max. Beschleunigung: 1G 1. Gestreckter Aluminiumträger Luftfahrtlegierung mit erhöhter Steifigkeit reduziert deutlich Verformungen des Trägers bei Hochgeschwindigkeitsbetrieb und verbessert die Richtungsstabilität sowie die Bearbeitungseffizienz bei hohen Geschwindigkeiten. 2. Maschinenbett mit Zapfen-und-Mortise-Platten-Schweißkonstruktion Chinesische traditionelle Zapfen-und-Mortise-Struktur sorgt für erhöhte Tragfähigkeit. Durch Schweißnaht-Fixierung und strukturelle Belastung wird eine dauerhafte Betriebsstabilität gewährleistet. Die geschweißte Konstruktion bietet eine verbesserte Schwingungsdämpfung, reduziert Abweichungen durch Vibrationen und ermöglicht präzisere Schnittergebnisse. 3. Doppelte, elektrisch betätigte und automatische zentrierende Spannfutter Doppelte elektrische Spannfutter mit automatischer Zentrierfunktion ermöglichen eine einfache Bedienung und erfordern nur minimalen Wartungsaufwand. Ein neuer Motor sorgt für präzise Steuerung. Modulbauweise der Spannfutter-Komponenten, eigenständig entwickelt und schnell austauschbar. 4. Automatische Fokussierung des Laserkopfs Durch separate Einstellung der Perforations- und Schneidfokushöhe wird eine präzisere Schnittqualität erzielt. Laodpfsg Eglpex Adwei Geeignet für mehrere Fokuslängen; die Fokusposition passt sich automatisch der Blechdicke an. 5. Niederdruck-Gasalarmfunktion Echtzeit-Gasdrucküberwachung und automatische Störungsmeldung gewährleisten Schnittqualität und Präzision und erinnern den Bediener rechtzeitig an einen Gaswechsel.

Kondisi: bekas, nomor mesin/kendaraan: 007134, Tipe tepi yang diaplikasikan: tepi tipis, tepi tebal, kayu solid Ledpfx Adot Hmtzjwjai Sistem lem: EVA, udara panas Penyambungan milling: ya Unit multifungsi: ya Unit router atas: ya Kecepatan makan maksimum: 25 m/menit Ketebalan papan maksimal: 60 mm Unit kerja: 10 unit

Tahun pembuatan: 1999, Kondisi: bekas, en-GB: The DSG 200 vertical sawmill is an ideal solution for woodworking plants specialising in the production of furniture and wooden flooring. It is efficient and performs exceptionally well in operation. A used Wintersteiger mini sawmill is an excellent investment – one of its main advantages is its compact size compared to standard machines of this type, while still providing outstanding performance in material processing. It is designed for cutting components and adjusting them to the required dimensions. The machine is user-friendly and operators can quickly learn to use it proficiently. The key benefit of our sawmill is its comprehensive equipment, most notably the saw blade spray system controlled from the main panel, which enables precise cutting of wet material. The independent adjustment of the upper roller height allows for faster changeover of the cutting height. Pneumatic feed pusher assists material advancement. TECHNICAL DATA: - Total power: 27.3 kW - Air Jet system motor: 2.3 kW - Siemens control panel - Feed rate: up to 2 m/min - Sawmill frame stroke: 210 mm - Number of strokes: 400/min - Infinitely adjustable cutting height on our frame: 45–250 mm - Maximum possible cutting height: 400 mm! - Cutting width with lateral pressure: 80–205 mm - Minimum block length: 250 mm - Lamella thickness from 1.5 mm (depending on wood type and cutting height) - Kerf of used saws: 0.9–1.1 mm (depending on cutting height) - Length: approx. 5000 mm - Width: approx. 1300 mm - Height: approx. 2600 mm - Weight: 5000 kg - Pneumatic feed pusher Included with the machine: - Complete large saw frame - Small saw frame - Frame pins - Frame tensioning wedges - Saw spacers - Wet cutting saw blades - Dry cutting saw blades - Set of upper drive rollers - 4 lower drive rollers - Full set of slideways - Frame yokes - Pocket cutting guides - Loading magazines - Technical documentation (DTR) - Electrical diagram Laedjtvm Hdspfx Adwsi

Kondisi: baru, Tahun pembuatan: 2025, CNC 2040 SPECIAL Milling Plotter is a precision machine engineered and manufactured in Poland, designed for machining a wide range of engineering materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (Dibond, carbon, Alucobond), soft metals, and more. CONSTRUCTION: The plotter is constructed entirely from high-quality steel. During the production process, all components undergo specialized heat treatment. WORKING AREA: The effective working area of our CNC machine is 2100 x 4100 mm, with the entire worktable (executed in T-slot technology) measuring 2100 x 4100 mm. Z-AXIS RANGE AND GANTRY CLEARANCE: The standard Z-axis travel is 200 mm, with the possibility to increase it up to 400 mm upon request. DRIVES: Laedpfx Asin Uilodwoi Our machines are powered by digital servo motors with high resolution and power, ensuring optimal acceleration and speeds in all directions. The X and Y axes are equipped with robust, proven helical racks, guaranteeing high durability and precision. The Z-axis is driven by a high-quality ball screw. All axes move on linear rail guides. SPINDLE: The tool is driven by a high-performance, liquid-cooled, durable brushless spindle. Spindle bearings are top-grade machine bearings, exceptionally quiet and surpassing average durability standards. The spindle rotational speed ranges from 6,000 to 24,000 rpm. Power is supplied via an inverter rated higher than the spindle, protecting against RPM drops under heavy load. SOFTWARE: The machine is equipped with up-to-date CAD/CAM software, enabling quick and easy component design and converting designs into G-code. Import of ready-made files from other programs is also possible. CONTROL SYSTEM: The plotter is operated via a controller with its own processor and RAM, ensuring stable and reliable performance. The controller enables active vector analysis for smooth movement with minimal processing deviation. It also features power failure recovery, allowing the machine to resume operations without reinitializing the program. The integrated memory allows for repeated use without reloading files each time. Additional options: * Vacuum table with Busch or Becker pump * Chip extraction system * Oil mist lubrication system * Customizable worktable size

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-250-87-6869, Drilling head with 8 spindles (V8 SW/32) Horizontal drilling head with 4 spindles on X axis Horizontal drilling head with 2 spindles on Y axis Laodpfx Adjvtyc Hswsi Grooving saw D=100 mm (X axis direction) Stop cylinder for workpiece positioning Workpiece clamping system Workpiece length: 2500 mm Workpiece thickness: 12-60 mm WOODWOP for the machine WOODWOP IMPORT DXF BASIC (1 license)

Kondisi: bekas, Hymmen CombiCoater ELX-S 1400 paint line with UV dryer. Ledpjlf H Tcefx Adwjai - Technical data will be provided shortly - For self-dismantling and self-collection.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Machining centre Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working area X: 2,500 mm Working area Y: 1,300 mm Working area Z: 4 - 80 mm Number of milling units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Laodeh E Sghepfx Adwei Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: swivels 90° X-axis feed rate: 130 m/min Y-axis feed rate: 80 m/min Z1-axis feed rate: 50 m/min Z2-axis feed rate: 27 m/min Spindle speed: 18,000 rpm Dismantled – immediately available