Garis pengemasan dan paletisasi

HOMAG

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, daya: 19 kW (25,83 hp), jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.730 mm, jumlah spindel: 20, Jumlah stasiun alat di turret alat 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of traverses with suction: 8 Number of tool magazine slots: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling Unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid cooled Njdpfjyttf Sjx Abvjcp MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety enclosure Note: Cones, cutters, and attachments are not included in the scope of delivery. Safety fences will be supplied as available (left side only). The machine is sold and delivered 'as is, where is', based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Tahun pembuatan: 2025, Kondisi: baru, Automatischer Palettenspender ist das Rückgrat Ihrer Automatisierungsprozesse. Mit bis zu 10 Europaletten (1200x800 oder 1200x1200) beladen, entfällt das manuelle Vorbereiten jeder einzelnen Palette – das spart Zeit und reduziert die körperliche Belastung der Mitarbeitenden. Stattdessen gibt das Gerät Paletten auf Knopfdruck oder nach voreingestelltem Algorithmus auf ein motorisiertes Rollenband ab, das sie zur weiteren Verarbeitung weitertransportiert. Der PD-10 kann mit verschiedensten Palettierlösungen kombiniert werden. Nsdpohbg Uxjfx Abvecp Fassungsvermögen: bis zu 10 Europaletten Beladung per Gabelstapler Reduziert körperliche Belastung Steigert Effizienz

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.550 mm, tinggi benda kerja (maks.): 40 mm, jumlah spindel: 30, kecepatan perjalanan (maks.): 80.000 mm/menit, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Max. workpiece height: 40 mm Number of suction beam traverses: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Ncsdpfx Absyttcwovep Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of positions: 18 Tool magazine 2 Number of positions: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cone and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7350

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 25 m/menit, kecepatan rotasi (maks.): 12.000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Nsdpfx Absytr Hbjvscp Edge Processing Aggregate 1 Aggregate: Pre-milling Unit Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 2 Aggregate: Top Trimming Unit No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Aggregate 3 Aggregate: Multifunction Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 4 Aggregate: Top Trimming Unit Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Aggregate 5 Aggregate: Edge Scraper Model: MN21 with NC positioning Edge Processing Aggregate 6 Aggregate: Glue Scraper Model: FA11 Edge Processing Aggregate 7 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Aggregate 8 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Installed total power: 35 kW EQUIPMENT Spraying unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and descriptive technical/commercial documentation. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and operation of the machine at the destination. External Reference: 6216

Kondisi: bekas, Presssystem: kontinuierlich / Kalander Hauptlieferanten: Bison / Berstorff Ncjdpfx Aboul H Nmovsp Auslegungsleistung: 160 m³/Tag Erreichte Kapazität ca.: 200 m³/Tag Effektive Betriebszeit: 23 Std./Tag Referenzdicke: 3,2 mm Max. Bruttobrettbreite: 2500 mm Max. Netto-Brettlänge: 2440 mm Max. Netto-Brettbreite: unbegrenzt Min. Netto-Brettbreite: 1220 mm (durch Trennen) Min. Brettdicke: 2,0 mm Max. Brettdicke: 10 mm Elektrisches System: 380 V, 50 Hz Baujahr: 1985 Wesentliche Modernisierungen: 2007-2009, 2016 Betrieb bis: Mai 2018

Kondisi: belum diuji (bekas), Tahun pembuatan: 2007, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 20 mm, model controller: POWER CONTROL PC22, kecepatan rotasi (maks.): 12.000 rpm, Auction extended by one week due to updated technical specifications! TECHNICAL DETAILS Workpiece Dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Ncedpfx Absyqx U Hsvep Milling and Gluing Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Adhesive tank for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Top and bottom rough flush trimming: available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for rough machining: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Scraper blade Edge Processing Unit 6 Glue scraper blade Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Kondisi: bekas, nomor mesin/kendaraan: 008244, de20240622-01 Ncedpfx Abox Swgfovep

Tahun pembuatan: 2000, Kondisi: baik (bekas), Barberan Laminating Line For any inquiries, please contact: 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum workpiece thickness: 3 mm Maximum workpiece thickness: 40 mm Maximum workpiece length: 2800 mm Minimum workpiece length: approx. 600 mm Variable speed control from the brush cleaning station, maximum speed: 20 m/min. The line includes: - Tommassini automatic loading system (non-operational) - Top and bottom brushing machine - Pre-heating lamps before upper and lower glue rollers - PVAC glue applicator - Additional top and bottom drying lamps Nsdpeilqvrsfx Abvjcp - Calender line with steel rollers for pressing - Additionally, the line is equipped with a purchased top-side corona treater (operational) – enables single-sided lamination with PP films

Kondisi: baik (bekas), de-01 Nodpjb A Nx Dsfx Abvscp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Working height: 900 mm Working width: 1,350 mm Belt change side: left Workpiece thickness: 3 – 160 mm Frequency-controlled feed speed: 4 – 20 m/min Abrasive belt dimensions: 2,620 x 1,350-1,380 mm Adjustable abrasive belt blowing device, 5-step adjustable WRD WORKPIECE CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically moves to a 10 mm workpiece thickness and the blowing rotors are activated. After the feed belt has been completely cleaned, the machine returns to its original setting. AAT EXTRACTION SLIDE GATE CONTROL Control of extraction slide gates via the terminal (24 volts DC, without extraction slide gates) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1–3 PC Emergency power supply for belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – underside sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. Machine is pre-configured for up to two auxiliary units, such as cleaning brush, satin or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatic pressure roller adjustment, profiled steel roller, 240 mm diameter with grit compensation system Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for quick belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, contact-free belt tracking system - Pneumatic belt tensioning with integrated belt edge compensation II. R UNIT Njdsyw Ndmepfx Abvscp Sanding unit with automatic pressure roller adjustment, rubber roller, 240 mm diameter Rubber hardness: 85° Shore with grit compensation system Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for mounting a pressure bar - Automatic locking of the sanding assemblies for quick belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, contact-free belt tracking system - Pneumatic belt tensioning with integrated belt edge compensation - Protected storage on the machine for additional sanding tools Drive motor: 22 kW Abrasive belt speed: 2–18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BAR - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the front and rear workpiece edges - Various sanding inserts, 80 mm width, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, but additionally: FBM FINISH BRUSH Brush unit with finish brush Brush fill: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Kondisi: baik (bekas), de-DE: Traypacker / Wrap-Around-Packer Ncodpfx Aefxypiobvop Trays und Wrap-Around-Kartons Minimale Verpackungsgröße L x B x H = 190 x 140 x 80 mm Maximale Verpackungsgröße L x B x H = 460 x 350 x 250 mm 4-bahnige Maschine. Hotmelt-Maschine wurde 2018 überholt. Siemens S7-PLC-gesteuert. Einfacher Formatwechsel. Verkauf im Ist-Zustand oder kundenspezifisch angepasst.

Kondisi: sangat baik (bekas), Flexible batch size 1 production and single-sided edge banding line (right) Ncedjinigmopfx Abvjp Consisting of the following machines: M.01) FEED TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDING MACHINE (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control/Software PC 22 Feed speed (adjustable) m/min 18 - 32 Panel infeed system WZ 14/30 Jointing unit with CNC control (2 x Kw 3) DOUBLE gluing unit (PUR glue + premelter) 2 x PU 34 Pressure zone (CNC-controlled) - Edge magazine for coil material (12 compartments) End trimming unit WK13 (CHAMFER / STRAIGHT, automatic adjustment) Pre-milling unit (2 x Kw 0.55) pneumatic adjustment Multifunction profile milling unit (CNC-controlled) MF 21 (2 x Kw 0.55) Profile copying milling unit FF 32 (4 x Kw 0.4) with automatic changeover device Contour trimming unit (for fine milling), CNC-controlled FK 31 (30 m/min) recently added after a technological retrofit Multi-profile scraping unit (CNC-controlled) MN 21 (servo) Finishing unit (flat scraper + smoothing unit) FA 11 Universal milling unit for grooving/rabbeting and profiling UF 11 (1 x Kw 4) M.03) LOADING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Workpiece & Performance Panel formats: • Length: 1,200–1,400 mm • Width: 195 mm • Thickness: 5–12 mm Main line capacities (excerpt): • Multiblade saw feed: 2–48 m/min • Bundle forming: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Portal Loader Vacuum gantry for raw panel feeding (fixed edge right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return with light curtain safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for feeding • Capacity approx. 12 pallets Ncedpfxoywxras Abvop • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Decor Alignment Station Aligns panels for decorative-appropriate downstream processing 4. Multiblade Circular Saw K34/G/2200 Longitudinal cutting with edge trimming • Feed rate: 2–48 m/min • Max. cutting height: 58 mm • Main motor: 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cutting) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross Cut Station HPp11 Cross cutting in continuous run with hold-down beam • Cutting width 2,200 mm • Pneumatic top pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Layer turning device (2×8 compartments) to separate multiple stacks • Conveyor speed 10–50 m/min 8. BARGSTEDT Angle Transfer (TW) 90° redirection with belt conveyors, feed up to 130 m/min Transfer to profiling line Profile Processing (soundproof) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided edge processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Glue joint coloring + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • Identical configuration • Integrated edge sealing 11. Sonolit Soundproof Cabin Enclosure for both HOMAG profile machines • Approx. 12,000 × 7,000 × 3,000 mm Postprocessing 12. BARGSTEDT TTK44/21/14/02 Drying Turner Workpiece turning in continuous operation • Up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Bundling 14. BARGSTEDT TVP40/L/14/02 Bundle Forming Station Automatic bundle forming with first/second quality sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Bundle height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Cartoning Station Folding and provision of cartons before packaging • Capacity up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Applicator Automatic application of protective paper • Guaranteed up to 10 packs/min 17. Labeling Station Automatic package labeling (format range as per packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrink Wrapping Line Fully automatic film packaging with shrink tunnel • Connected load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling line after shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Bundle Cross Stacker Automatic stacking onto pallets • Bundles up to 1,400 × 195 × 58 mm • Max. capacity 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer pallet forming with vacuum lifters • Up to 6 cycles/min • Bundle weights up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic empty pallet supply for final palletizing

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Machining centre Manufacturer: Weeke Ncsdpfeh E Sghsx Abvsp Model: BHX 500 Year of manufacture: 2008 Working area X: 2,500 mm Working area Y: 1,300 mm Working area Z: 4 - 80 mm Number of milling units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: swivels 90° X-axis feed rate: 130 m/min Y-axis feed rate: 80 m/min Z1-axis feed rate: 50 m/min Z2-axis feed rate: 27 m/min Spindle speed: 18,000 rpm Dismantled – immediately available

Kondisi: bekas, nomor mesin/kendaraan: 008395, arbeitsbereich_achse_x_3050_mm_arbeitsbereich_achse_y_1250_mm_le istung_hauptspindel_10_kw_anz_kontrollierte_achsen_3_achsen_anzah l_bohrspindeln_27_anzahl_werkzeugplatze_8 Ncedeygtcqjpfx Abvjp