Grup pengumpul bulir padi

HOMAG

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 40 mm, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 35 m/menit, kecepatan rotasi (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Lrodpfxsyqybus Afioi Buffing unit 2 motors Spray device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application via rubber belt Panel guides with NC positioning Glue tank for EVA hot-melt adhesive Premelting device for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on protective devices CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at its destination. External reference: 5321

Tahun pembuatan: 2023, Kondisi: baru, Maximum chopping height: 200 mm Infeed width: 500 mm Number of feed rollers: 3 pcs Rotor diameter: 600 mm Chopping length approx.: 20-30 mm Output capacity: 16–20 cubic meters/hour wood chips Number of chopping knives: 2 pcs Feed motors: 2 x 2.2 kW Net weight approx.: 4100 kg Infeed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversized roller bearings Bearing housing: steel, flange housing Feed rollers: steel, specially toothed Chip discharge: below the machine Machine grate: (screen) for re-shredding overlength chips Drive pulley: matched to main motor, N=1500 rpm Lodpfxencd Aze Afisri Hydraulic system: comprises hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed: by 2 geared motors, manufacturer NORD GETRIEBE

Kondisi: belum diuji (bekas), Tahun pembuatan: 2007, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 20 mm, model controller: POWER CONTROL PC22, kecepatan rotasi (maks.): 12.000 rpm, TECHNICAL DETAILS Workpiece Dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Gluing Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Glue pot: for EVA hot-melt adhesive Pre-melter: for EVA hot-melt adhesive Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Top and bottom flush trimming (rough): available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Ljdpfxsyqx U Ho Afieri Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for rough machining: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Scraper blade for edges Edge Processing Unit 6 Glue scraper blade Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Bandsanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, daya: 19 kW (25,83 hp), jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.730 mm, jumlah spindel: 20, Jumlah stasiun alat di turret alat 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of traverses with suction: 8 Number of tool magazine slots: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling Unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Lrsdpfxjyttf Ss Afisi Liquid cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety enclosure Note: Cones, cutters, and attachments are not included in the scope of delivery. Safety fences will be supplied as available (left side only). The machine is sold and delivered 'as is, where is', based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Kondisi: bekas, Tahun pembuatan: 2004, WEINIG GRECON DOUBLE-END FINGER JOINTING LINE MOD. PJ 150/500 – CE – USED - Infeed wood length: 150 – 700 mm - Wood width: 40 – 150 mm - Wood thickness: 18 – 80 mm - Press length: 6100 mm - Pressing force: 120 kN Lsdpfswry I Esx Afieri - Milling motor: 15 kW - Scoring saw: 5.5 kW - Year: 2004 CE

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.550 mm, tinggi benda kerja (maks.): 40 mm, jumlah spindel: 30, kecepatan perjalanan (maks.): 80.000 mm/menit, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Max. workpiece height: 40 mm Number of suction beam traverses: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of positions: 18 Tool magazine 2 Number of positions: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Lredpfx Afeyttcwjioi Note: Cone and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7350

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 25 m/menit, kecepatan rotasi (maks.): 12.000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Aggregate 1 Aggregate: Pre-milling Unit Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 2 Aggregate: Top Trimming Unit No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Aggregate 3 Aggregate: Multifunction Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 4 Aggregate: Top Trimming Unit Ledpfeytr Hbox Afiori Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Aggregate 5 Aggregate: Edge Scraper Model: MN21 with NC positioning Edge Processing Aggregate 6 Aggregate: Glue Scraper Model: FA11 Edge Processing Aggregate 7 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Aggregate 8 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Installed total power: 35 kW EQUIPMENT Spraying unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and descriptive technical/commercial documentation. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and operation of the machine at the destination. External Reference: 6216

Tahun pembuatan: 2013, Kondisi: bekas, Drying chamber with intermediate ceiling ventilation and front-end wagon loading for production and conditioning of 3 mm oak lamellae, from initial moisture content 12 up to max. 15% / final moisture content 7%. Used, good condition Manufacturer: Mühlböck Model: ZSWM2110-1180C – 1.0 l/h at 40°C above 30% RH Year of construction: 2013 Rated power: 7 kW/15A Frequency: 50 Hz Control voltage: 24VDC/230VAC Protection class: IP54 Contents: The chamber accommodates - 2 stacks widthwise at 1.10 m each, with 0.20 m spacing - 1 stack heightwise at 1.80 m, on 0.10 m thick bearers, plus 0.10 m clearance - 2 stacks lengthwise at 2.20 m each, plus 0.60 m clearance The chamber contains 4 stack packages and a gross total volume of 17.4 m² The chamber holds a net 4 m³ of wood — with a wood thickness of 3 mm and stacking strip thickness of 10 mm, and 90% width utilization with edged wood. Usable internal chamber dimensions: width 2.40 m x height 2.30 m x length 5.00 m - Aluminum cassette construction - Aluminum frame - Dimensionally stable rock wool insulation - Aluminum trapezoidal sheet cladding - Snow load: 100 kg/m² - Double-leaf hinged door - Front-end loading - 2 fans, each 3 kW (D=800 mm) - Stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature 80°C, return 73°C Lrsdpfxevwfhie Afiji - Servo-controlled supply and exhaust air dampers - Cold water spray system - Chambers operate fully automatically - Computer control K5 Dismantling: at customer site Delivery as-is, as inspected Without guarantee or warranty

Kondisi: sangat baik (bekas), Flexible batch size 1 production and single-sided edge banding line (right) Consisting of the following machines: M.01) FEED TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM Lsdpfxeinigms Afijri "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDING MACHINE (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control/Software PC 22 Feed speed (adjustable) m/min 18 - 32 Panel infeed system WZ 14/30 Jointing unit with CNC control (2 x Kw 3) DOUBLE gluing unit (PUR glue + premelter) 2 x PU 34 Pressure zone (CNC-controlled) - Edge magazine for coil material (12 compartments) End trimming unit WK13 (CHAMFER / STRAIGHT, automatic adjustment) Pre-milling unit (2 x Kw 0.55) pneumatic adjustment Multifunction profile milling unit (CNC-controlled) MF 21 (2 x Kw 0.55) Profile copying milling unit FF 32 (4 x Kw 0.4) with automatic changeover device Contour trimming unit (for fine milling), CNC-controlled FK 31 (30 m/min) recently added after a technological retrofit Multi-profile scraping unit (CNC-controlled) MN 21 (servo) Finishing unit (flat scraper + smoothing unit) FA 11 Universal milling unit for grooving/rabbeting and profiling UF 11 (1 x Kw 4) M.03) LOADING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Workpiece & Performance Panel formats: • Length: 1,200–1,400 mm • Width: 195 mm • Thickness: 5–12 mm Main line capacities (excerpt): • Multiblade saw feed: 2–48 m/min • Bundle forming: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Portal Loader Vacuum gantry for raw panel feeding (fixed edge right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return with light curtain safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Decor Alignment Station Lredpeywxrasfx Afiji Aligns panels for decorative-appropriate downstream processing 4. Multiblade Circular Saw K34/G/2200 Longitudinal cutting with edge trimming • Feed rate: 2–48 m/min • Max. cutting height: 58 mm • Main motor: 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cutting) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross Cut Station HPp11 Cross cutting in continuous run with hold-down beam • Cutting width 2,200 mm • Pneumatic top pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Layer turning device (2×8 compartments) to separate multiple stacks • Conveyor speed 10–50 m/min 8. BARGSTEDT Angle Transfer (TW) 90° redirection with belt conveyors, feed up to 130 m/min Transfer to profiling line Profile Processing (soundproof) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided edge processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Glue joint coloring + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • Identical configuration • Integrated edge sealing 11. Sonolit Soundproof Cabin Enclosure for both HOMAG profile machines • Approx. 12,000 × 7,000 × 3,000 mm Postprocessing 12. BARGSTEDT TTK44/21/14/02 Drying Turner Workpiece turning in continuous operation • Up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Bundling 14. BARGSTEDT TVP40/L/14/02 Bundle Forming Station Automatic bundle forming with first/second quality sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Bundle height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Cartoning Station Folding and provision of cartons before packaging • Capacity up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Applicator Automatic application of protective paper • Guaranteed up to 10 packs/min 17. Labeling Station Automatic package labeling (format range as per packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrink Wrapping Line Fully automatic film packaging with shrink tunnel • Connected load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling line after shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Bundle Cross Stacker Automatic stacking onto pallets • Bundles up to 1,400 × 195 × 58 mm • Max. capacity 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer pallet forming with vacuum lifters • Up to 6 cycles/min • Bundle weights up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic empty pallet supply for final palletizing

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), Fungsionalitas: fungsi terbatas, listing-de-001 Ledpfx Afox Tg Hqjijri

Kondisi: bekas, nomor mesin/kendaraan: 008395, arbeitsbereich_achse_x_3050_mm_arbeitsbereich_achse_y_1250_mm_le istung_hauptspindel_10_kw_anz_kontrollierte_achsen_3_achsen_anzah l_bohrspindeln_27_anzahl_werkzeugplatze_8 Lrsdpfx Aoygtcqofiji

Kondisi: bekas, nomor mesin/kendaraan: 007985, Type of attached edge: thin edge, thick edge, solid wood Lredpfex A Th Dox Afiji Adhesive system: EVA Jointing cutters: yes Multi-function unit: yes Working units: 7 units

Kondisi: baru, Semi-automatic drilling machine - Precision lift frame for accurate drilling results and demanding applications - Infinitely variable drill stroke adjustment with automatic return via limit switch Ljdpfxjd Rhy Ds Afieri - Two-hand safety control - Horizontal and vertical workpiece clamping via foot switch - Automatic or manual operation - Position-accurate adjustment on the Y-axis - Support table right/left with scale and folding stops We would be pleased to offer you a quotation tailored to your specific requirements.

Kondisi: bekas, nomor mesin/kendaraan: 008323, Tipe tepi yang dipasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA, PUR Lredex Hpkxjpfx Afioi Penghalusan sambungan: ya Agregat multifungsi: ya Kecepatan maju maksimum: 20 m/menit Ketebalan papan maksimum: 60 mm Unit kerja: 7 unit