Gergaji pemotong papan Homag Sawteq B-130 2022

Homag Sawteq B-130

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, nomor mesin/kendaraan: 0-241-06-5232, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 12.608 h, ketinggian potong (maks.): 125 mm, lebar pemotongan (maks.): 2.200 mm, panjang pemotongan (maks.): 4.300 mm, Panel Saw Holzma HKL11/43/22 Lebar potong maks: 4300 mm Panjang potong maks: 2200 mm Kodpfxexfvp As Al Nolw Tinggi potong maks: 125 mm Mesin gergaji sedang dalam penggunaan terus-menerus, sehingga memungkinkan untuk dilihat saat bekerja. Mesin akan tersedia mulai 02/03/2026.

Kondisi: bekas, Tahun pembuatan: 2008, Daya terpasang: 15 kW Kecepatan pengumpanan: 14 (11) m/menit Ketebalan benda kerja: 8 - 60 mm Ketebalan tepi: 0,4 - 8 mm Pemisahan rol: maks. 3,0 x 45 / 0,8 x 65 mm Diameter ekstraksi: 120 / 160 / 100 mm Tinggi kerja: 950 mm Dimensi: 6260 x 1560 x 2300 mm Berat: sekitar 3000 kg Lokasi penyimpanan: pemasok Kedpfey Ruzqox Al Nolw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, model controller: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and scoring saws, as well as a patented central angle return system that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For further information on this panel saw, please contact us. Additional Equipment • Air cushion table with roller element 2160 x 650 mm: 4 units • Central blower: 1 unit Machine Advantages Qualitative Machine Advantages • CE-certified, GS-certified, FPH wood dust certified • Partitioning: 75/275/475/1050/1850/2650/3450 mm measured from the angle stop to the center of the gripper • 2 additional two-finger grippers possible • 4 manual trimming rakes on grippers • 1 additional single-finger gripper possible • Nozzle spacing of the air cushion tables: 70 x 70 mm Klodjyaiiyopfx Al Now Technical Machine Advantages • Trimming saw motor: 2.2 kW • Operating voltage: 400 V / 50 Hz • Electrical connection value for main saw motor: 18.0 kW = 24 kW, 21.0 kW = 27 kW • Positioning accuracy: +/- 0.1 mm/m • Gentle material handling, lifelong positioning accuracy, no lubrication required, high program pusher speed, maintenance-free, full stability of the steel table preserved, simple and cost-effective phenolic resin panel replacement, minimal cylinder wear, consistent pressure application, minimal cut = scoring cut, significant cycle time savings, top cutting quality, minimal setup times, cycle time reduction, adjustable pressing force via electric control • Cutting length: 4300 mm • Cutting width (program pusher travel): 4250 mm • Roller conveyor (10-track element): 1 unit • Roller conveyor (2-track element): 5 units • Grippers: 7 units (first 3 with two fingers, all others with one finger) Additional Information Machine still under power

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: completely overhauled Warranty: 1-year guarantee Technical Specifications: Left-side adjustable angle stop according to AGA 4383 Longitudinal Panel Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in machine base and pressure beam - Scoring saw adjustable from outside (no need to open safety cover) Saw Unit with Regulated DC Drive: - Precise positioning (e.g. for cut-outs) - Slowed immersion exit from the cut - Includes safety cover interlock, lamella curtain SZ 5008 - Offcut device SP 5004 – offcuts down to min. 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (individually switchable) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: threshold value of 2 mg/m³ significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher by servomotor - Table surface closed with Pertinax plates (suitable for narrow strips) - Feed speed: 25 m/min (safety restricted) - Return speed: 40 m/min - Table length: 3100 mm - Fence depth: 3100 mm Multi-microprocessor control - Integrated PC with hard drive - Operating system: LINUX - Interfaces: serial + parallel, USB - Network connectivity (including wireless LAN) - Optimize cutting plans in the office and send directly to machine - Multitasking capable - Print function via USB - Remote maintenance via Internet (Remote Desktop, TeamViewer) - Multilingual dialog programming - 15” flat screen + multifunction keyboard - Swiveling control panel - Graphical display of cutting plans and workflows Additional Features: Angle stop table HP 5043 (front-mounted): - Machined steel angle, Pertinax table support - Table size: 1800 × 800 mm Workpiece support table HP 5025 (front-mounted): - Pertinax support - Table size: 1800 × 800 mm Air cushion device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw) Ksdpfxexhg Ibo Al Nslw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Brandt KDF 1440 Edition only 1,700 operating hours – excellent condition – can also be supplied with the XES 200 Autark pre-heating station (+ €4,500) OVERVIEW OF UNIT CONFIGURATION: JOINTING MILLING UNIT: 2 x 2.2 kW 200 Hz GLUING UNIT: QA 65 N END TRIMMING UNIT, BEVEL/STRAIGHT: 2 x 0.18 kW PNEUMATIC ADJUSTMENT FOR END TRIMMING, BEVEL/STRAIGHT MULTI-STAGE MILLING UNIT: MS 40 (counter-rotation) PNEUMATIC TWO-POINT ADJUSTMENT PROFILE MILLING UNIT: 1 x 0.35 kW WD 60 (suitable for construction flooring) PNEUMATIC TWO-POINT ADJUSTMENT FOR RADIUS/BEVEL MULTI-STAGE SCRAPER UNIT: MZ 40 GLUE JOINT SCRAPER Kjdezb Iggepfx Al Njlw BUFFING UNIT Top pressure: PU rollers instead of standard rollers Additional QA 65 N gluing unit (interchangeable) Release agent spraying unit for workpiece Automatic edge feed Multiple roller tracing for multi-stage milling unit MS 40 + multi-stage scraper MZ 40 Cleaning agent spraying unit WORKPIECE AND EDGE PARAMETERS: – Minimum workpiece width: – For workpiece thickness 8–22 mm: 70 mm* – For workpiece thickness 23–40 mm: 120 mm* – For workpiece thickness 41–60 mm: 150 mm* *depending on workpiece length – Workpiece overhang: 38 mm – Workpiece thickness: 8–60 mm – Maximum edge height = workpiece height + 6 mm – Edge material (coil): 0.4–3 mm – Max. edge cross-section: – For PVC: 135 mm² – For veneer: 100 mm² – Max. coil diameter: 830 mm – Edge material (strips): 0.4–8 mm – Max. edge cross-section for strips: 360 mm² – Feed speed: 8–14 m/min – Maximum feed speed with profile milling: 11 m/min – Working height: 950 mm – Pneumatic connection: min. 6 bar – Total length: 5,573 mm Complete description: see PDF

Kondisi: bekas, Tahun pembuatan: 2022, panjang total: 8.000 mm, lebar total: 2.400 mm, tinggi total: 2.400 mm, T0001 Kjdpfx Aey E Hdgol Nolw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, nomor mesin/kendaraan: 241.125, Fungsionalitas: berfungsi sepenuhnya, Bandsaw horizontal produksi Schelling, dirancang untuk memotong material berbasis kayu HPO – program optimisasi pemotongan Proyeksi mata gergaji: maks. 95 mm Kecepatan gerak carriage gergaji hingga 120 m/menit Panjang pemotongan: Model FH 4 430 - 4.300 mm Dapat diperiksa dalam kondisi bekerja hingga awal 2026. (pembongkaran direncanakan) Diameter maksimum mata gergaji – 350 mm Proyeksi – 95 mm Bukaan penjepit 90 mm Klodox Ebzdopfx Al New Daya motor gergaji – 15 kW Diameter scorer 300 mm Laju masukan material maju hingga 80 m/menit mundur 80 m/menit Laju gerak gergaji maju hingga 120 m/menit mundur 120 m/menit

Kondisi: bekas, nomor mesin/kendaraan: 008514, de4250-beskriv Klsdpfxjy Edn Ao Al New

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Rover Multi Up M C S CNC Machining Centers Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on working conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece Passage*: Y = 1900 mm Axis Travel Paths*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Segmentation of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool magazine and the 12-position side tool magazine. Tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for the machine PC. 6 ATS Workpiece Supports – 18 Module Carriers — 6 aluminum workpiece supports. The support movement is guided by linear guides with recirculating ball carriages. Clamping is performed on the front and rear linear guide using pneumatic cylinders. Clamping is released via a push button located on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping The vacuum modules can be rotated by 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA Set-Up Assistant Table for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position display. — Sensors on each work table and along the X-axis of the working area. — Indication of the direction and position reached during positioning phase, mounted on each work table The system, according to work table programming, suggests to the operator the moving direction for each work table and carriage, indicating with a green LED and audible signal when the position is reached within a tolerance of ± 1.5 mm. Segmentation of pneumatic system into 2 working zones in X Machining unit with 5 interpolating axes, 13 kW (17.4 HP), with HSK F63 adapter, liquid cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting of aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions on the machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. HSK F63 tool holder, equipped with an extended integrated flange, suitable for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech Tool Kit Complete set of tools for acceptance test Comprising the following 9 parts Replacement of the standard PC with a high-performance PC. Digital devices for measuring tool length for diameters up to 130 mm. bSolid Ksdpjy Ehrxjfx Al Nolw NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1 license WorkCenter suction cup recommendation 5-axis simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg – Immediately available –

Kondisi: baik (bekas), Tahun pembuatan: 2011, Armoured roller Kledpfswvhrtsx Al Nsw CBM 240 / ST 120 MACH-ID 923 Type: CBM 240 / ST 120 Year of manufacture: 2011