Mesin Honing SHM - Mesin Honing Manual

Honmaster SHM

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Fsdspugwiepfx Ahuega Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), de-hu-it-lt-2024-06-13-1 Fgsdpfx Aewbuyzohuoa

Kondisi: bekas, Tahun pembuatan: 2013, Swing diameter . mm Turning length 2000 mm Control system: Siemens 840 D sl Fedsvu E R Sjpfx Ahujga Main spindle: Max. speed 3800 rpm Main spindle: Max. torque 1200 Nm Quill diameter 140 mm Centre taper MK6 Quill force 5 – 30 kN Feed rate Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis – mm/min Rapid traverse X-axis 25 m/min Total power consumption 125 kW Machine weight approx. 20 t The machine is still under power and can be inspected at the seller's premises. It is in good condition, and the machining accuracy for turning operations is very good. The milling drive is not functional. A repair quote from Niles for the milling drive is available on request. Including hydraulic steady rest.

Kondisi: bekas, Tahun pembuatan: 1969, Translation of technical listing for export platforms: Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: -- mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Required space approx.: -- m D I S K U S Vertical double-sided surface grinding machine in C-frame design with rotary workpiece feed system Model: DDS 600 CRA Year of manufacture: 1969 Serial No.: 6672 _____ Grinding wheel diameter x bore (each): 600 x 150 mm Grinding wheel width approx.: 60 mm Workpiece transport disc, outer Ø: 810 mm Workpiece: Max. grinding height x width: approx. 60 x 120 mm Vertical quill adjustment (each): approx. 150 mm Hydraulic infeed impulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Feed rate for rotary device, steplessly adjustable: 14 – 145 mm/s Grinding wheel speed (each): (24 m/s) / 765 rpm Grinding spindle drive (each): 22 kW Total drive: approx. 50 kW / 380 V / 50 Hz Total weight: approx. 7,000 kg Accessories / Special Features • Rotary workpiece fixture for round transport discs with equipment slots for part placement and automatic ejection of finished parts onto a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height, including (if needed) automatic hydraulic grinding wheel advance • Stepless speed regulation of rotary feed device dependent on grinding requirement and workpiece dimensions Fsdpfx Aot Hw N Hehusga • Manual infeed of grinding wheels via push buttons • Hydraulically swiveling dressing device (RA) between the two wheels for simultaneous dressing of both grinding wheels, with appropriate compensation and automatic repositioning to effective workpiece thickness after dressing = significant time savings; can be activated manually or via timer • Ammeters for both grinding spindle drives • Central lubrication • Mechanical workpiece height control with machine shut-off in case of overheight • Free-standing control cabinet, separate hydraulic unit, large separate belt filter system, various grinding wheels, several transport wheels, etc. This machine is particularly suited to simultaneous, parallel-surface grinding of workpieces in large-scale production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – ready for demonstration shortly Delivery: ex-stock, as inspected Payment: strictly net, after receipt of invoice.

Kondisi: sangat baik (bekas), Tacchi HD/1450 X 4M Lubang Spindel Besar (515mm) Tahun 2002 Kontrol CNC Siemens Diameter ayunan di atas alas: 1450 mm Diameter ayunan di atas eretan: 1000 mm Spindel berlubang 515 mm Chuck depan dan belakang kepala utama Rentang kecepatan: 1,5 – 450 rpm Berat di antara senter: 15.000 kg Baruffaldi 4 arah auto toolpost 2 x steady rest 3 titik Fgedpfx Aexg Ivdjhuea

Tahun pembuatan: 1992, Kondisi: bekas, Grinding height: 50 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Total power requirement: 85 kW Machine weight approx.: 9,500 kg D I S K U S CNC-controlled vertical double-sided surface grinding machine with rotary workpiece feed and IONIC measuring control system. Model: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel diameter: each 600 x 150 x 75 mm (height) Workpiece data: Grinding height approx.: 1.5 – 50 mm Grinding width approx.: 20 – 120 mm Vertical quill adjustment, each approx.: 150 mm Grinding wheel infeed via CNC: 0.0001 mm Workpiece transport device feed, continuously variable: 40 – 235 mm/sec Grinding wheel speed each (30 m/s): 191 – 955 rpm Grinding spindle drive, infinitely variable: each 37 kW Total drive approx.: 85 kW / 380 V / 50 Hz Weight approx.: 9,500 kg Accessories / Special equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (infeed top and bottom, dresser, and workpiece rotary table), direct input of all grinding data, and in combination with: • IONIC measuring system no. 17A with 2 probes for scanning the workpieces after the grinding process, triggers appropriate infeed of the grinding wheels, ongoing measurement results displayed on monitor for statistics, workpiece counting, etc. • Digital display of power (amperes) for drive motors and grinding wheel speed • Portal design for higher stability and precise grinding results • Rotary workpiece transport with continuously variable speed as fourth axis Fjdpfx Ahet Hw Naouega • Position monitoring device for supervising the position height of the lower grinding wheel • 2 adjustable workpiece hold-down devices at infeed and outfeed, height monitoring, simple raw part stacking device, and finished parts removal by conveyor belt • Angled, side-mounted dressing device with programmable dressing cycle, CNC axis integrated into the control unit, with safety cut-off • Large separate control cabinet, automatic central lubrication, sophisticated pneumatic system • Large PROMATEC (F) coolant system with filtration and magnetic separator • Various grinding wheels, flanges, table segments, transport discs, large fume extraction unit, etc. This machine is particularly suitable for simultaneous, perfectly parallel grinding of workpieces in large batches such as stamped parts, piston rings, hydraulic components, etc. Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This is a very rare opportunity in terms of both condition and price. Should you require another grinding machine – particularly from DISKUS – please send us your inquiry.

Kondisi: bekas, Tahun pembuatan: 2011, Mesin bekas Tahun pembuatan: 2011 Kondisi: Mesin telah direkondisi dan dirawat sepenuhnya Perlengkapan dan data teknis: Kecepatan umpan stepless 10-18 m/menit Kontrol Edge Control 19 dengan layar sentuh warna 18,5" Unit penghalusan pinggiran Sistem pemberian tepi otomatis Stasiun aplikasi lem dengan patron, nosel sensor penyesuaian tinggi lem otomatis Unit penekan Unit pemotong Unit milling multifungsi Unit copy milling Unit scraper radius Unit scraper permukaan Unit pemoles Tebal benda kerja: 6 - 60 mm Tebal pinggiran: 0,4 - 8 mm Lebar benda kerja minimum: 60 mm Panjang benda kerja minimum: 180 mm Fgjdpfx Aowka N Tshusa Dimensi: 5300x1500x1600 mm Berat: 2200 kg Lokasi: 65439 Flörsheim Ketersediaan: segera

Tahun pembuatan: 1980, Kondisi: baik (bekas), A very well-maintained, used cycle-controlled lathe from Weisser Heilbronn with SIEMENS control. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel, X-axis: 350 mm Travel, Z-axis: 1850 mm Spindle nose: DIN 55022, size 8 Number of spindle speeds: 18, 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. permissible torque at spindle: 2500 Nm Tailstock quill: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Dimensions (L x W x H): Machine weight: 5500 kg Fgedpfogyy I Asx Ahuea Accessories: Tailstock Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm Multifix quick-change toolpost in front of the centre, size 'C' 4-position turret behind the centre Tool holder Coolant system Travelling steady, pneumatically operated Technical data and dimensions subject to change. A video conference via WhatsApp is possible by appointment.

Kondisi: bekas, Tahun pembuatan: 2003, Max. diameter pemesinan: 420 mm Panjang putaran: 1090 mm Kontrol: FANUC Seri 18i-TB Lubang gelendong: 108 mm Cekam: 250 / 315 mm Rentang kecepatan putar: 0-3750 rpm Kecepatan feeding: 18/24 m/menit Jumlah alat: 12 Kursi tailstock: 100 mm Diameter tailstock: 110 mm Taper: MK 4 Jumlah alat penggerak: 12 mm Kecepatan putar: 3000 rpm Torsi: 22 Nm Tangki pendingin: 140 L Total kebutuhan daya: 22/18,5 kW Berat mesin: sekitar 6500 KG Batang silinder DIN 69880: VDI 50 Pemesinan batang: Tidak Fgsdpfx Asucgyljhuoa Pekerjaan dengan cekam: Ya Diameter dalam lunette hidrolik: Dm 20-165 mm

Kondisi: baru, Supply voltage 230 V Battery 24 V / 100 Ah Brush diameter 510 mm Rotation speed 175 rpm Air suction capacity 24 L/s Tank capacity 50 / 50 liters Weight 160 kg Dimensions (L x W x H) 1,100 x 520 x 1,000 mm KREMER floor cleaning machine: Fgodpfx Aevu Hccjhuea Delivered with battery and charger Theoretical cleaning performance: Capacity: 2,000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/dirty water tank capacity: 50 / 50 L