Bengkel tukang kayu

Hundegger K2-Industry

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 24.000 kg, p-HUN-K2I-2024 Dkodjxx T Rdjpfx Adgog

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger jointing press, foldable - Drying paternoster, approx. 7 m, for board lengths up to 6 m - Separation and zero saw - Conveyor belt for residual wood disposal - Stacking unit - Strip magazine not included in the sale - Package cross conveyor Dksdpswclkyefx Adgeg The machine is in very good condition, very little used The machine is still installed but available immediately

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fully automatic wood infeed with feed roller conveyor Extension of the infeed transversal conveyor and feed roller conveyor for timber lengths up to 13 m Loading and feeding transversal conveyors Under-table swing crosscut saw Universal 4-axis milling unit (UF4) Combination carriage for vertically operating tools Drilling unit 2.2 kW Combination carriage for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse slot milling machine Rear marking unit (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device with two-hand control system Electronic control with EKP software Outfeed roller conveyor for timber including extension (without drive) Component ejector 5-arm timber rack Dkjdewuppwopfx Adgog Safety devices and guarding

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, lebar meja: 300 mm, tinggi potong dengan pisau scoring (maks.): 100 mm, panjang spindle milling: 250 mm, Equipment: - 1 GRECON feeding transfer system with accumulation for 4 to 5 purged lamellae of varying lengths for finger jointing - 1 GRECON double finger jointing system with deep tooth profile (for glulam beams) Dsdpfswz H Anex Adgjkg - 1 180° transfer system with two-component gluing - 1 GRECON finger jointing press - 1 CNC controlled cross-cut saw - 1 outfeed table

Tahun pembuatan: 2023, Kondisi: bekas, Used machine Year of manufacture: 2023, delivered in 2024 Condition: as new, machine is in its original packaging and has not been commissioned Features and Technical Data: Infeed Table / Cross Conveyor: - Number of strands: 6 × Supergrip timing belts - Pitch: 650 / 650 / 850 / 1500 / 1500 mm - Length: approx. 1.8 m - Drive: Gear motor, 1.5 kW - Minimum workpiece infeed length: 0.8 m - Function: Automatic transfer of raw material via level lowering to the infeed table Infeed Table: - Smooth sliding table with sliding plastic for damage-free feeding of raw material by servo pusher into the processing zone - Support width: approx. 200 mm Blockhouse 4F-SERVO (Main Milling Unit): - Processing dimensions: 140 × 200 mm - Horizontal milling depth, top: max. 60 mm - Horizontal milling depth, bottom: max. 35 mm - Vertical milling depth: max. 95 mm - Milling spindles: Ø 30 mm - Milling tools horizontal: 2 × D = 220 mm × W = 120 mm - Milling tools vertical: 2 × D = 280 mm × W = 120 mm - Motor power: 4 × 4.0 kW - Feed: horizontal and vertical by SERVODRIVE, steplessly adjustable via software - Milling depth adjustment: spindle, digital counter - Workpiece clamping devices: vertical pneumatic, horizontal pneumatic - Extraction: Underfloor hopper Ø 160 mm (pit required on site) - Control: IPC / PLC / IITO software - Machine frame prepared for end-groove or dovetail milling unit, boring device and crosscut saw - Machine enclosure: closed, with swing-up safety hood (gas strut, viewing window) Dedpfx Ajxavtkodgjkg - Electrical control cabinet on base, cable duct 3.0 m Option i (Automatic milling depth adjustment for 4F milling unit): - Four additional NC-controlled servo axes for automatic positioning of 4F tools - Control via IPC / IITO software - Function: automatic milling depth adjustment with ±0.1 mm tolerance - Extended processing capabilities: - Individual grooves and milling on four component sides - Cut-outs and markings for window and door openings - Double and triple joints - Half corner joints (e.g. for upper and lower wall planks) Tools: - 2 × three-part slot cutters D 220 mm, width 21–65 mm, LM - 2 × three-part slot cutters D 280 mm, width 21–65 mm, LM - 1 × end groove cutter D 240 mm × 20 mm - 1 × dovetail cutter D 40 mm, width 15 mm Combination Milling Unit End Groove & Dovetail: - 3-axis milling unit for manufacturing end grooves and dovetail joints - End groove cutter Ø 240 mm × width 30 mm - Max. end groove milling depth: 40 mm - Dovetail width variable - Motor power: 4.0 kW - Speed: inverter-controlled, max. 4,500 rpm - Feed (DT.Y axis): SERVODRIVE, steplessly adjustable - Height adjustment (DT.Z axis): SERVODRIVE - Rotation adjustment (DT.R axis): SERVODRIVE - Workpiece clamp: vertical pneumatic - Minimum plank thickness for longitudinal connection: 80 mm - Control: automatic via IPC / PLC / IITO software Horizontal Drilling Unit with Drill Guide (BGD SERVO): - Max. drilling diameter: Ø 30 mm - Drill Ø = 20 mm included in delivery - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: SERVODRIVE, steplessly adjustable - Height adjustment (Z-axis): SERVODRIVE, digital counter - Workpiece clamp: vertical pneumatic

Kondisi: bekas, Fungsionalitas: belum diuji, Rentang penjepitan: maks. 240 mm Tinggi potong: maks. 450 mm Kedalaman potong: maks. 380 mm Dkjdpfjw Npk Aex Adgjg Daya motor: 2,2 kW

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11441, Saat ini kami bekerja dengan versi berikut: 9.23.12.102733-12 Peralatan K2: mesin milling universal 4-sumbu 2 unit mesin bor gergaji jari di bawah mesin pembuat alur Stasiun pemutar balok hidrolik Djdpfx Adowvih Ajgskg Mesin berfungsi penuh dan dapat dilihat sesuai janji. Tersedia mulai 30/11/2025. Pembongkaran dan pemuatan ke truk dari perusahaan kami sudah termasuk dalam harga. Penjualan sebagai mesin bekas tanpa jaminan apa pun.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Hundegger K2-5 carpentry centre with five heads. The machine is in perfect condition after servicing, with no play in the mechanisms. The machine can be viewed live in operation. Please feel free to contact me for more information. Dkjdpfxjwrd R Re Adgog

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, I am selling an automatic CNC machining center for BLOCK-HOUSE production, Hundegger K2i, year of manufacture 2011. Virtually as new. Year of construction 2015. Undertable circular saw with saw blade from 750 mm to 800 mm, 360° rotation, servohydraulic tilt 0–65°. Universal 5-axis unit with round cutter, end mill, and end mill, cutter head diameter 350 mm x 100 mm end mill. Combination holder for at least 5 tools with horizontal drilling unit, power up to 2.5–3.0 kW, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum processing depth 300 mm. Dkodpfjxtxkxsx Adgsg Combination holder for at least 5 tools with horizontal drilling unit, power up to 2.5–3.0 kW, maximum drilling diameter 24 mm, minimum drilling length 460 mm, minimum processing depth 300 mm. Positioning and clamping of workpieces by means of gripper arms. While the workpiece is being measured and brought to the desired position, the gripper arms stabilize and hold the workpiece as close as possible to the tool. The machined material can be rotated automatically. Tolerance +/- 2 mm over a length of 13 m. Fully automatic timber feed with infeed roller conveyor and crossfeed sliding transporter. K2i: Undertable inclined crosscut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Combination support unit for vertically operating tools K2i: Drilling unit (2.2 kW) – vertical drilling direction K2i: Combination support unit for horizontally operating tools K2i: Drilling unit (2.2 kW) – horizontal drilling direction K2i: Marking unit (rear or operator side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic interface K2i: Roller conveyor for removal of timber elements with pusher K2i: 5-arm storage table K2i: Safety device K2i: Machine with upgraded surface finish K2i: Extended K2i frame to 13.56 m K2i: 5-axis universal milling unit – UF5 (upgrade to 4 axes) K2i: Remote diagnostics (incl. portable video camera) K2i: Dovetail milling machine (with rotary knives) 60x28x16.5 Ideal for timber construction! Available immediately.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, jam operasional: 0 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 00000000001, Approximately 18m long Already dismantled On-site loading possible Dksdovrv Trepfx Adgsg Fully functional