Hundegger k2i

Hundegger K2-Industry

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12762, ketinggian potong (maks.): 300 mm, Fully automatic wood infeed Infeed roller conveyor Loading and feeding cross conveyor Under-table swiveling crosscut saw, 11 kW 5-axis universal milling unit - UF5 Dodpfx Adexxa Dwogoul Combination support for vertically operating tools Drilling unit 2.2 kW - vertical drilling direction Combination support for horizontally operating tools Reinforced drilling unit (3.0 kW) - horizontal drilling direction Slotting unit 7.5 kW Marking device at the rear (on the stop side) Fully automatic hydraulic beam turning station Transport and positioning system "two-hand operation" Electronic control with Hundegger production software Roller conveyor for wood outfeed with pusher 5-arm timber rack Safety devices and protective guarding Refined machine surface Extension for loading cross conveyor Infeed roller conveyor for 13 m wood length 5-axis universal milling unit - UF5 Turret milling unit - vertical from above Remote maintenance possible Special switch cabinet installation Control unit for waste disposal with operating buttons Extension roller conveyor 7.10 m, non-driven Liftable and lowerable safety impact barrier

Kondisi: bekas, Waste Conveyor / Späneförderband Busch KF 110-80 HF 35 Year of manufacture: 2000 Conveying height: 1100 mm Delivery chute length: 800 mm Conveying speed at 50 Hz: 0.40 m/s Weight: 94 kg Suitable for use with saddle-stitchers, perfect binders, and three-knife trimmers. Online video inspection available via WhatsApp, MS Zoom, or Telegram. Dsdpfx Adevkuqmegoul In stock in Emskirchen/Nuremberg – immediately available – test runs possible.

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, lebar pemotongan (maks.): 625 mm, Hundegger joinery machine with mechanization 5 axes Working width: 625 mm Dusdev Ubtcjpfx Adgel with tools

Kondisi: bekas, Weinig Unicontrol 10 (UC 10) angle processing line for the production of windows, components, and doors. Suitable for frame-based, series, or single-part production, featuring 2 tenoning and mortising spindles, including Oertli tool set. - Units/equipment: Dujdpfxev Ag Tds Adgol 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC axis, ø 50 mm, 15 kW, Clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC axis, ø 50 mm, 11 kW, Clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, Clamping length: 4 x 80 mm 5. Profile milling unit, horizontal, from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, Clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, Clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis, 3 kW - Twin part package - Rebating package with rebate carriage - Automatic turning system - NEXUS PC control - CNC-controlled length stop - Studio window configuration - Unit for bottom edge rounding with crosscut saw - Glazing bar support rail - Including extraction duct system - Including Oertli tool set - Further technical data and tooling diagrams available on request.

Tahun pembuatan: 1993, Kondisi: baik (bekas), Braun WES Tension Carriage Fully hydraulic with auxiliary carriage with rails Track width: 79 cm Duodpfx Adsfuh Dyjgsl Good condition - immediately available Also check out my other listings. I look forward to your inquiry.

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), This is a complete production line for house construction. Prices are listed for each individual item. Consisting of the following components (see the attached document as well): Images to follow; they are already included in the attached document. Table 1 (Laying in and clamping the frame construction) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Laying the first facing layer and fastening) €25,300 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying the second facing layer, fastening, and flipping the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical components and insulation) €34,500 - Cross transport with rollers and facing layer - Table cross travel - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first facing layer and fastening the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying the second facing layer and fastening) €28,750 - Longitudinal transport with 3 hinge conveyors Duodeu D Amgepfx Adgjl - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Assembly and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swivel unit - Table cross travel unit - Upper guide for holding wall elements vertically Manual surface portal with vacuum lifter on Table 2 €13,800 (Laying the first facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 3 €13,800 (Laying the second facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 5 €13,800 (Laying the first facing layer on the second side) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 6 €13,800 (Laying the second facing layer on the second side) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Wall storage rack 1: 12 m long x 24 tracks €11,500 Wall storage rack 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 Abus spreader beam 2 t €20,125 1 spreader beam 2 t

Kondisi: baik (bekas), Manufacturer: MBT Type: MV-250 S Motor: 5.5 kW Dusdpfx Adjhzr U Iegsl Hopper size: 780 x 600 mm Housing dimensions: 3500 x 1000 x 2200 mm

Tahun pembuatan: 2021, Kondisi: baru, Aluminum angle conveyor belt incl. mobile substructure Horizontal section: 1500 mm (customizable) Inclined section: 2500 mm (customizable) Angle at the bend freely selectable: 30°, 35°, 40°, or 45° Polyamide swivel castors with parking brakes Conveyor belt width: 400 mm (customizable) We supply our conveyor belts in PVC, PU, or rubber. PVC conveyor belt incl. cleats and corrugated sidewall Drive: Motor 0.25 kW (customizable), speed 0.3 m/sec Duedpfx Aehh A Uqodgjl Connection: 220/240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for leveling Corrugated sidewall: 40x35 mm (customizable) T-20 cleats - 400 mm spacing (customizable) 2-ply, particularly cross-stable Our core competence is to deliver exactly what the customer really needs. We work together with our customers to develop customized, individual solutions and supply the relevant systems from our own production. Please feel free to contact us by phone as well to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Tahun pembuatan: 1985, Kondisi: bekas, Spindle moulder, table milling machine Dsdscnpxnopfx Adgjul - Spindle moulder: with fixed spindle - Feed unit: included - Spindle diameter: Ø 30 mm - Speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm - Dimensions: 1400 x 800 x H1480 mm - Weight: 600 kg

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fully automatic wood infeed with feed roller conveyor Extension of the infeed transversal conveyor and feed roller conveyor for timber lengths up to 13 m Loading and feeding transversal conveyors Under-table swing crosscut saw Universal 4-axis milling unit (UF4) Combination carriage for vertically operating tools Drilling unit 2.2 kW Combination carriage for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse slot milling machine Rear marking unit (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device with two-hand control system Dusdowuppwopfx Adgol Electronic control with EKP software Outfeed roller conveyor for timber including extension (without drive) Component ejector 5-arm timber rack Safety devices and guarding