Hundegger P8

Hundegger p8

Kondisi: hampir baru (bekas), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Max. working width: 300 mm • Max. working height: 140 mm • Electronic stepless feed: 12 – 120 m/min • Feed motor: 22.0 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors with electronic braking • COMPLETELY NEW MILLING SPINDLES • Spindle diameter: 50 mm • Spindle speed: 6,000 rpm • 6 driven rollers in the table – hard-chromed • Spindles 1 + 6 + 7 + 8 + 9 with NEW counter bearings • Hydraulic counter bearing clamping • Spindles 2 + 3 + 8 + 9 with straight jointer • Spindles 4 + 6 with pneumatic pressure • NEW feed rollers, D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty top pressure rollers – pneumatic • Heavy-duty side pressure rollers – pneumatic • Automatic table lubrication – NEW • Centralized lubrication points • NEW free-standing control panel, 5m cable • NEW free-standing control cabinet, 5m cable • Operating manual, spare parts list, and wiring diagram + Many NEW spare parts / accessory components Nodpfx Aetynpxegyjwp Dimensions: • Total length: approx. 6,150 mm • Total width: approx. 2,160 mm • Machine weight: approx. 9,500 kg Power supply: • Total connected load: approx. 157 kW Condition: Machine as shown in the photos – technically as new Payment: Payment in full prior to loading, net, cash in advance Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers and inquiries only with complete company details Subject to prior sale and errors excepted.

Kondisi: baru, Tahun pembuatan: 2025, Semi-automatic optimizing crosscut saw with electronic positioner featuring push/stop operation mode COST-OPTIMIZING SAWING SOLUTION Superpush 150 is the entry-level center for cutting and optimization. Developed as a direct technological evolution of traditional cutting methods, it is capable of increasing productivity and maximizing wood yield. Nwodpfxog Hzvge Agyop EXCEPTIONALLY ROBUST Heavy-duty, fully welded and reinforced painted steel frame. Horizontal table with movable guard to facilitate workpiece loading. Carriage operating both as length stop and pusher. Linear unit with steel-reinforced toothed belt and linear bearing guides. Continuous horizontal piece accumulation table, 300 mm wide. TECHNOLOGICALLY INNOVATIVE Electronic system featuring an integrated CNC touchscreen control panel. Linux-based software with customized interface. 15.6” color resistive touchscreen display for full safety in industrial settings. Program import via USB. Remote teleservice capability via Internet. + Excel macro integration. FAST S4U Lite software suite. Brushless positioner motor with digital servo driver. Quick-select interface for Stop/Pusher mode. Adjustable cutting speed. RELIABLE AND SAFE Ball bearing slides with double dust protection. Freestanding electrical cabinet, separated from the machine. Independent pneumatic adjustments for adapting to different processing types. Two-hand safety control for cutting operation. CE-certified machine from a Notified Certification Body (not self-certified).

Kondisi: baru, Power feed unit - 4 rollers - Roller diameter: 120 mm - Roller width: 60 mm Nedpsh Dikwefx Agyjwp - Motor power: 0.75 kW - Pole-changeable motor - Speed: 1,400 rpm - Feed speed: 3 - 18 m/min, variable - Approx. weight: 37 kg WITHOUT stand '‘Standard’' or '‘Stativ 1050’' stands available as options Note on used machines: • Errors in technical specifications and prior sale reserved. • The stated prices are ex works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, with no guarantee or warranty whatsoever. Buyers are free to inspect the machines at their location. • Special agreements are only valid in written form. (We only respond to enquiries that include your address and telephone number!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya,

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Njdpermucxofx Agyowp Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Set for finger jointing in medium and high-volume production. The machine is technically sound and in good condition. The set includes several sets of tools. Features: – Industrial set with a single tenoner. Operator-supervised bundle loading allows processing of lower-grade raw materials as well, – All functions controlled by microprocessors (automatic control), – Bundle rotation after each operation on a rotary table (butt joint) or flipping the bundle over (furniture joint—unique GOMA solution), – The set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specifications: Milling spindle: Ø 50x210 mm Spindle speed: 6,000 rpm Motor: 18.5 kW Tool dimensions: Ø 250x160 mm Saw spindle trues the end grain Special chipper: Ø 300x8 mm Motor: 6 kW / 3,000 rpm Stepless feed table Working width x height: 600 x 30–160 mm Nsdpfxslu D Tfs Agyswp Glue nozzle profile according to tool FC-10 PZ6/2 PRESS Specifications: Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 / 7.5 / 10 T Hydraulic power unit: 3 kW / 140 bar

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, panjang pemotongan (maks.): 8 mm, Perlengkapan: kabin, Complete Artiglio log saw with Eagle 1100/I carriage. Serviced by Artiglio in 2018. In excellent condition. Nwodpfsv Sr U Ejx Agysp

Kondisi: baru, AGRE ALUP ALLEGRO 14+ 13 270 Speed-controlled. Space-saving. Cost-effective. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Impressive compressed air quality. Cyclone separator and refrigeration dryer integrated. Detailed equipment: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor, with 1:1 direct drive Control: Speed-regulated with frequency inverter Controller: Graphic controller C55DD Refrigeration dryer: Integrated, refrigerant R513A Filtration: Incl. cyclone separator Tank: Horizontal, painted Performance data: Free air delivery at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Rated motor power: 15 kW Oil quantity: 5.2 l Nwsdpfx Aoixt I Hegyjp Dimensions and Weight: L x W x H = 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air receiver capacity: 270 l

Tahun pembuatan: 1988, Kondisi: perlu perbaikan (bekas), Mekanisasi untuk di depan mesin serut untuk KVH/BSH – untuk panjang hingga sekitar 13 m. Instalasi KVH+BSH ideal untuk di depan mesin serut. Pemisahan memanjang – pemisahan satu per satu. Gergaji potong melintang: 4 buah gergaji bundar yang dapat disetel samping. Penampang potong: 180 x 220 mm, 150 x 300 mm. Satu operator sudah cukup. Nwedpfx Agjvbtpeyop

Kondisi: bekas, Tahun pembuatan: 2008, Biesse Rover A 3.40 FT - NBC 412 Automatisierte Nestingzelle Beschreibung: Rover A 3.40 FT Zentralisiertes automatisches Schmiersystem 8 vordere Anschläge + 8 hintere Anschläge mit Sensoren 1 rechter Seitenanschlag mit Sensor Vakuumsystem für 2 Pumpen à 300 m³/h 12 kW (16,1 PS) Elektrospindel mit ISO 30 Aufnahme, luftgekühlt Blaseinheit Bohrkopf BH 18 A Revolver-Werkzeugwechsler mit 10 Positionen Numerische Steuerung XP600 BiesseWorks - Advanced – Maschinen- und Büroversion Nwodpfx Agowh Sfzsysp BIESSE NEST Modul Be- und Entladearm, auf Querträger der Maschine positioniert Be- und Entladetisch, auf der linken Maschinenseite CE-Sicherheitsvorrichtungen Drehkolben-Vakuumpumpe Mechanischer Andrückring mit pneumatischer Absenkung, für Nesting-Anwendungen (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden