Mesin pengasah pisau

HURTH SRS 400

Kondisi: bekas, Tahun pembuatan: 1977, Max. grinding diameter: 400 mm Grinding width: 0 mm Module - max.: (not specified) Module - min.: (not specified) Total power requirement: 3 kW Machine weight approx.: 4.2 t Space requirement approx.: (not specified) Wheel diameter (min./max.): 64 - 320 mm Grindable module size: 1 - 12 module Max. hob width: 40 mm Number of teeth: 13 - 240 Roll radius - Ø: 73 - 320 mm Gsdpfx Aot Hwnvjbhotu Workpiece table feed rates: 5 - 20 - 30 - 40 teeth/min Grinding wheel speed: 690 rpm Grinding wheel diameter: 762 mm Grinding wheel swivel (engagement angle): 5-21° Grinding slide swivel (helix angle): 2 x 35° Vertical grinding slide adjustment: 240 mm Dressing speed: 1 / 0.5 / 0.25 m/min Grinding spindle drive / Total drive: 1.1 / 3 kW - 380 V - 50 Hz Weight approx.: 4,200 kg Accessories / Special equipment: The machine is suitable for grinding external and internal gear shaper wheels as well as for grinding master gears or cutter wheels for gear shaping machines. Unfortunately, no further accessories are available for the machine—an investment as a secondary machine is recommended if suitable tooling is already available.

Kondisi: baru, Extraction performance at nozzle* (filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or custom colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine work areas | Oil mist separator Gtsdjh Rdwxepfx Abhju Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC included as standard (digital filter control) - Electronically controlled EC fan included as standard - Adjustable fan speed and air volume - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of airflow capacities available - Can be adapted to pollutant load and airflow requirements - Extensive range of mounting and connection accessories - Quality Made in Germany The ELBARON® filter series has been developed for use in machining processes with pure oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are used worldwide. Our filter units are already digitally equipped as standard and can, for example, be controlled via laptop. The ELBARON® device series comprises 18 variants and can be optimally configured in size and performance for your specific application. ELBARON® devices stand out for their long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve optimal filtration efficiency, maximum service life, and trouble-free operation while maintaining economic efficiency.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Smooth G control system Travel paths: X1/X2 axis: 207 / 141 mm Y1/Y2 axis: 100 / 70 mm Z1/Z2 axis: 760 / 815 mm W axis: 865 mm Max. swing diameter: 370 mm Max. turning diameter: 344 mm Main spindle: 26 kW, A2-8 spindle nose Main spindle max. speed: 4,000 rpm Main spindle max. bar capacity: 80 mm Sub-spindle: 22 kW Sub-spindle max. speed: 5,000 rpm C-axis sub-spindle, 0.0001° 2 pcs. 12-station turrets with 12 live tooling positions each Live tools: 11 kW, max. speed 6,000 rpm Prepared for 10" chuck on main spindle Prepared for 8" chuck on sub-spindle Finished parts gripper including conveyor belt Air blow for main spindle Air blow for handover between main and sub-spindle Air blow for upper and lower turret Coolant through sub-spindle Overload monitoring Extended program memory 8MB Cylindrical interpolation Drilling cycle with torque-dependent chip breaking Godpfx Ajmhihhobhstu 2 x high-pressure pump 70 bar Oil mist extraction Chip conveyor with drum filter, Cromar Series III Bar feeder Hydrafeed Multiservo MSV80 Finished parts station Rota-Rack Parts Accumulator

Kondisi: hampir baru (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 200 mm, jarak lintasan sumbu Y: 220 mm, jarak gerak sumbu Z: 280 mm, produsen pengendali: HEIDENHAIN iTNC530, berat benda kerja (maks.): 15 kg, lebar meja: 200 mm, panjang meja: 200 mm, kecepatan spindel (min.): 42.000 rpm, cnc-530-specs Gsdpfjxpg H Hox Abhotu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, jam operasional: 87.327 h, Fungsionalitas: berfungsi sepenuhnya, en: We offer you: CNC Machining Center – Universal Manufacturer: DMG MORI Model: DMU 210P duoBlock µ-Precision Year of manufacture: 2013 Control: Siemens 840D sl Technical specifications: Travel paths: x-axis: 1,800 mm y-axis: 2,100 mm z-axis: 1,250 mm Rotation range: 360° Main spindle: Max. speed – main spindle: 18,000 rpm Drive power – main spindle (100/40%): 35 / 25 kW Rotary table: Table diameter: 1,700 mm Tool changer: Tool holder: HSK-63A Number of tool stations: 120 positions Operating hours: approx. 87,327 h Spindle hours: approx. 48,297 h Features & Accessories: - Universal milling head with controlled B-axis - NC rotary table with cooled drive train - Tool measurement in working area, BLUM Laser NT Hybrid - Coolant supply 40 bar through spindle center - Coolant tank 2,500 l - Chip conveyor - Rotating inspection window - Electronic handwheel - 3D contouring control - Infrared probe, Renishaw PP60 optical (OMP 60) - 3D quickSET - 4-color signal lamp Gjdpfeyhbcusx Abhjtu - Rinse gun with pump - Operation mode 4 - Machine configuration for aluminum and glass machining, comprising: - Linear guides with additional Viton wipers - Ball screws partially with additional Viton/felt wipers - Air purge for all linear measuring systems - Lubrication interval reduction to 10 to 15 minutes (over-greasing) - Adjustment of maintenance plan for steel covers - Interface for camera monitoring and integration into the control - Machine with vacuum preparation, comprising: - 2-channel rotary union, special centering bushing, and cable guide in the T-slots to the table edge - Additional compressed air outlet at the edge of the table (opposite vacuum connection) - Integration of vacuum monitoring at control terminals with NC stop and error message "Vacuum failure" - Oil-resistant rubber hose secured with 2 clamps on the rotary union - Evaluation of the "minimum level" fault for feed and spindle stop - Monitoring of coolant flow for internal and external supply - Machine prepared (cable routing) for use with spindle growth sensor (SGS) At the beginning of 2025, the ball screws and linear guides on the x-, y-, and z-axes were replaced. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if noted in the additional information. Technical data and details may be subject to change and error. Prior sale reserved!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Mesin pengasah alat 5 sumbu dalam kondisi sangat baik, dijual karena tidak terpakai! Gtjdsxw Sxkepfx Abhsu

Tahun pembuatan: 2021, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4104064175, de-translate-kitotec-ct-12000-d-2021 Gtedjvi Enaepfx Abheu

Kondisi: bekas, TECHNICAL DATA Space requirements - Dimensions (length-width-height): 550 x 500 x 600 [mm] - Weight: 44 [kg] Connection - Voltage: 230 [V] Gedpfx Absu Su Edehjtu - Supply frequency: 50/60 [Hz]

Kondisi: baru, Nexturn SA32B with the following attachments: - Iemca Boss 338 bar feeder - Büchele SFB-100 high pressure unit Max. machining diameter: 12 / 20 / 32 mm Max. machining length: 160 / 210 mm Axes: 7 + Y1 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for supplying the machine and control with 200 V / 50 Hz, and chip conveyor prepared for attachment to Nexturn machines with machine tank. Modular system, all driven tools supplied by WTO, Made in Germany. Includes long part removal system. Scope of delivery: - CNC control system FANUC Oi TF+ with 7 controlled axes - C-axis on main and sub spindle - Main and sub spindle collet type: Standard - Synchronously driven guide bushing unit - Guide bushing type: Standard Standard equipment tool holder - Linear slides - 5-position tool holder, shaft 16x16 mm - 4 cross drilling units ER16 - Drilling device for front/rear end face machining, with 5 drilling spindles ER16 - Sub spindle for rear-side machining - Rear-side machining with 4 machining stations ER16 - Drive unit for tools on rear-side machining, with 2 fixed and 2 driven stations - Pneumatic workpiece ejector - Part ejection monitoring - Blow-out device for sub spindle - Workpiece catcher - Workpiece conveyor for removing finished parts - Separate coolant tank with level and flow monitoring - Machine prepared for high pressure units (electrical and mechanical adaptation up to 100 bar) - Coolant supply through sub spindle - Automatic centralized lubrication system with level monitoring - Toolbox with special tools - Interface for bar feeder - Interface for chip conveyor - PCMCIA card slot - USB interface - RJ-45 LAN interface - RS 232 C interface Standard control functions included: - 8 MB program memory - Metric input - Direct drawing dimension input - 200 tool wear compensations - Operating hour display - Parts counter - Network connection - Background processing - Automatic power-off function - Manual program run via handwheel - High-speed skip function for use with touch probes - Spindle speed monitoring (G25 - G26) - Thread cutting with variable pitch (G34) - Circular thread cutting (G35 - G36) - Cutter radius compensation (G40 - G42) - Macro programming (G65 - G67) Gedpfevyzqfjx Abhjtu - 3D coordinate transformation (G68.1 - G69.1) - Multiple repetition cycles (G70 - G76) - Drilling cycles (G80 - G89) - Constant cutting speed for main and sub spindle (G96 - G97) - Cylindrical interpolation (G107) - Polar coordinate interpolation (G112 - G113) - Rigid tapping (M29) - Z1 - Z2 synchronous control (M221 - M220) - Synchronous rotation/phase control of main and sub spindle (M56 - M57) - 4 additional free M-codes

Kondisi: bekas, TECHNICAL DATA For processing emulsions, mist, and smoke Gtsdouhb Emepfx Abhsu - Particle size: > 0.3 [μm] - Extraction capacity: 660 [m³/h] - Vertical installation - Option to protect the final filter with pre-filtration (3 washable and reusable pre-filters) - Voltage: 3x400 [V], 50 [Hz] - Power: 0.55 [kW], 1.5 [A] - Dimensions: 610 x 450 x 800 [mm] - Weight: 55 [kg]