Palu pneumatik

Huta Zygmunt MPM 10000

Kondisi: bekas, Impact energy: 11,000 kg/m Max. stroke: 900 mm Clear guide width: 750 mm Tool holder length in hammer bar: 750 mm Max. number of strokes: 90 min⁻¹ Tool holder length in die block: 1,050 mm Minimum tool thickness: 350 mm Max. upper tool weight: 1,100 kg Working height approx.: 780 mm Ram weight: 75,000 kg Machine weight approx.: 103,000 kg Djdpfxjvam Eno Adgjul

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 124, translation-001 Djdswl An Iepfx Adgsul

Kondisi: baik (bekas), Tahun pembuatan: 1989, tinggi total: 6.450 mm, For sale: Beche short-stroke drop hammer KGH 4B. Machine weight: 65 t Working energy: 40 kJ Max. blow frequency: 98/min Max. usable stroke rate: 41/min Duodpfx Asrt Uc Esdgel Max. ram stroke: 790 mm Machine is dismantled. Technical data available upon request.

Kondisi: bekas, Tahun pembuatan: 2008, Vertical Turning and Grinding Center Manufacturer: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control system: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Duodpfx Adsia Rtdegjl Chiller unit for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through spindle Two clamping circuits through spindle (air and oil) Please note: The grinding spindle is defective but can be overhauled at a spindle repair facility. Apart from that, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or *

Kondisi: bekas, Tahun pembuatan: 2006, Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front spindle bearing diameter: 70 mm Rapid traverse (x/y/z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Creep feed rate: 15 steps / 0 - 1,260 mm/min Tool magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter with free adjacent pocket: 125 mm Dujdpfxjv Az Ucs Adgol Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool time: 1.0 sec Total power requirement: 34 kVA Machine weight: approx. 7.2 t Space requirement: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Kondisi: baru, Tahun pembuatan: 2024, panjang rol: 3.000 mm, ketebalan lembaran (maks.): 90 mm, ketebalan pelat baja (maks.): 90 mm, tebal plat aluminium (maks.): 90 mm,

Kondisi: bekas, Tahun pembuatan: 2001, Dry-type distribution transformer 630 kVA, manufacturer TESAR Italy, voltage ratio 10000 (±2 x 2.5%) / 400V, Dyn5-11-1 configuration, protection class IP23 or IP00, forced-air ventilation (AF), aluminium/aluminium windings, temperature monitoring unit, fully functional, in very good condition, 2 units available Dodpfxoquwtxj Adgjul

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Dujdpfx Adjd Nb A Negel Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.

Kondisi: bekas, hydraulische-tafelschere-steiner-hts30-20r Dsdpfx Adod Hxx Asgoul

Kondisi: baik (bekas), Tahun pembuatan: 2004, Mountable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Cutter head mounting plate diameter (Ø) 360 mm Mounting taper nominal diameter for cutter heads Ø 58.227 mm Travel distance - Z axis 200 mm Recording diagram magnification ±10 - ±500 µm Machine weight approx. 2.3 t Required space approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gearing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved with precisely set cutter heads. The Oerlikon cutter head setting and testing device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measurement process on the CNC-controlled inspection device is semi-automated: The respective actions required for the process are clearly displayed on the screen via operator guidance. The positioning of the individual cutters in the cutter head and the height of the cutter tips is performed largely automatically via a special process and is simultaneously documented in a run-out diagram. A subsequent measurement process checks the radial position of the inner and outer cutting edges of all cutters in the cutter head. If certain test parameters of the cutters do not comply with tolerance specifications, they can be individually re-positioned. Through the combination of a semi-automated adjustment process, operator-guided setup actions, and an automatic measuring process, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and inspection process - Graphical display of the cutter head configuration and measurement results with tolerance check - Plain-language instructions for the operator (no encoded information) - Easy allocation of measurement results to individual cutters - Documentation of setting and measurement results via printer Dodpfx Adeul Efmogoul - Setting and inspection procedure suitable for blade-type cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data