Palu pneumatik

Huta Zygmunt MPM 10000

Kondisi: bekas, Impact energy: 11,000 kg/m Max. stroke: 900 mm Gedpfxevam Ebs Adtoil Clear guiding distance: 750 mm Tool holder length in hammer bar: 750 mm Max. number of strokes: 90 min⁻¹ Tool holder length in die holder: 1,050 mm Minimum tool thickness: 350 mm Max. upper tool weight: 1,100 kg Working height approx.: 780 mm Counterweight: 75,000 kg Machine weight approx.: 103,000 kg

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Godpfsxddvnex Adtsil Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, MITUTOYO Contracer CV-2100M4 contour measuring instrument Measuring range horizontal X = 100 mm Measuring range vertical Z = 50 mm Column travel Z2 = 350 mm Inclination +/- 45° Dimensions (W x D x H): 745 mm x 450 mm x 885 mm Total weight approx. 150 kg Includes PC system Includes cross table 218-001 Gijdpfxjvun Tps Adtsl Includes rotary vise 2028-003

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 124, translation-001 Godpowl An Iefx Adtsil

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Heavy-duty FPT Spirit 240-M140 moving column boring machine with high dynamics and 5-axis hydrostatic support. Working range: X AXIS: 14,000 mm Y AXIS: 5,000 mm Gjdpfxswiifhj Adtjil Z AXIS: 2,500 mm Equipped with 2 rotary tables, each with 50-ton load capacity. Automatic tool changer. CNC control: Siemens. The machine is equipped with 3 heads: - 1 automatic bi-rotary precision head (TUPCG) - 1 automatic heavy-duty milling head (TO144) - 1 D’Andrea facing/turning head, model U-TRONIC 800, for turning diameters from 150 mm to 1,600 mm.

Kondisi: bekas, Tahun pembuatan: 2006, Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front spindle bearing diameter: 70 mm Gijdpfev Az Ucsx Adtsl Rapid traverse (x/y/z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Creep feed rate: 15 steps / 0 - 1,260 mm/min Tool magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter with free adjacent pocket: 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool time: 1.0 sec Total power requirement: 34 kVA Machine weight: approx. 7.2 t Space requirement: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 610 mm, daya nominal (semu): 37 kVA, torsi: 236 Nm, produsen pengendali: Heidenhain iTNC530, model controller: iTNC530, lebar meja: 700 mm, panjang meja: 1.700 mm, beban meja: 700 kg, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 9.000 kg, kecepatan spindel (maks.): 12.000 rpm, jam operasional spindle: 16.580 h, daya motor spindle: 37 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 48, Perlengkapan: dokumentasi / manual, konveyor serpihan, 3-axis CNC machining centre Heidenhain iTNC530 X-axis travel: 1500 mm Y-axis travel: 700 mm Z-axis travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 positions Rapid traverse: 36 m/min Table load capacity: 700 kg Through-spindle coolant: 20 bar Gsdpfjvz Tyuox Adtoil Chip conveyor Electronic handwheel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, konveyor serpihan, Control: FANUC 18i-MB Travel (X / Y / Z): 1,020 / 510 / 510 mm Feed Rate (X / Y / Z): 1 – 10,000 mm/min Rapid Traverse (X / Y / Z): 48,000 mm/min Giodotz T Smepfx Adtol Table Size (W x D): 1,200 x 510 mm Spindle Speed: 15,000 rpm Internal Coolant Supply: 20 bar Tool Holder: BT 40 Tool Changer: 48 positions Weight: approx. 7,500 kg Dimensions (W x D x H): approx. 3,100 x 2,200 x 2,900 mm Hours: Spindle Hours: 9,310 Accessories: RENISHAW tool measurement system type OMP 40, coolant tank, machine manual, machine lamp, chip conveyor

Kondisi: bekas, Tahun pembuatan: 2005, Technical details: Godpfxetunccj Adtoil Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Machine weight approx.: 32 t From series production

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: 1 pengumpan luncur kanan 1 press eksentrik 250 kN 4 unit luncur normal 1 unit luncur sempit Ruang kerja: Diameter kawat: hingga 6,0 mm Lebar pita: hingga 80 mm Panjang penarikan: hingga 520 mm Giodpfor D N Eqjx Adtol Kapasitas: 10 - 250/menit.