Mesin uji roda gigi bevel

KLINGELNBERG-OERLIKON T60 A

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 330 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: Siemens, model controller: 840D, tinggi benda kerja (maks.): 370 mm, lebar meja: 320 mm, panjang meja: 320 mm, beban meja: 300 kg, kecepatan rotasi (min.): 80 rpm, kecepatan rotasi (maks.): 80 rpm, berat keseluruhan: 9.000 kg, kecepatan spindel (min.): 15.000 rpm, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 31 W, hidung spindel: HSK 63A, panjang alat: 250 mm, diameter alat: 125 mm, berat alat: 8 g, jenis kontrol: Kontrol CNC, Perlengkapan: konveyor serpihan, Hermle C22U Pusat Pemesinan 5 Sumbu Kontrol Siemens 840D 5 Sumbu Simultan XYZ: 450 x 600 x 330 mm Meja diameter 320 mm Diameter benda kerja maksimum 320 mm Tinggi benda kerja maksimum 265 mm Beban meja maksimum 300 kg Sumbu A -/+ 135 derajat Kecepatan spindle 15.000 rpm Penukar alat 55 stasiun Konveyor serpihan Pendingin Pemroses alat Ndjdpfxsxpil So Ab Eed Probe spindle

Kondisi: bekas, Tahun pembuatan: 1995, Wheel diameter – max. 80 mm Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 #0836 _____ Max. wheel diameter 80 mm Module 1–3 Helix angle +/- 45° Distance table center to tool center 15–160 mm Vertical hob carriage travel 250 mm Shifting distance/tool traverse path 180 mm Min. number of teeth 3! Cutter diameter x length approx. 90 x 200 mm Cutter speeds up to max. 800 rpm Feeds in axial/radial/tangential directions 20/4/5 mm/rev Max. workpiece clamping length 250 mm Nsdpfxst Hw R Do Ab Eodd Spindle drive approx. 8 kW Total drive approx. 30 kW – 400 V – 50 Hz Total weight approx. 7,500 kg Equipment / Special features • SIEMENS CNC control type 840 C for 6 axes (i.e. hob drive/table drive/swivel angle of hob head/axial feed/radial feed/tangential feed), with gearing-specific operator interface and diagnostic functions for rapid troubleshooting. • With device for automatic threading of the hob into the tooth gap • Automatic shifting of the hob axis • Automatic component loading unit SSL = Rapid Swivel Loader using mechanical indexing gear and cam disk for quick loading times, with triple rotary gripper for loading blanks/processing position/unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feeding via plate chain conveyor (PKB) for workpiece transport with positive-fit workpiece carrier. Additional feed belt for raw and finished parts • Chip conveyor, complete work area enclosure, intermediate coolant tank with pump Complete enclosure of the workspace with sliding door and oil mist extraction, etc. The machine can also be used for dry gear cutting. Condition: satisfactory to good – under power, ready for demonstration, compact design! Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), en: Horizontal machining center Giddings & Lewis HMC 410 Pallet size: 1,250 x 1,600 mm Maximum pallet load: 7,000 kg Pallet change time: 55 sec Number of pallets: 2 units Table indexing: B-axis 0.001° X-axis travel: 3,000 mm Ndodpfxoguk Ico Ab Eod Y-axis (vertical) travel: 2,100 mm Z-axis (longitudinal column travel): 1,800 mm Feed rate (X/Y/Z): 1 – 40,000 mm/min Rapid traverse (X/Y/Z): 40 m/min Rotary table speed: 6 rpm Maximum rotary diameter: Ø2,500 mm Spindle taper: ISO 50 Spindle drive motor: 30 kW Spindle speed range: 20 – 5,000 rpm Automatic tool changer (ATC): 120 tool pockets CNC control system: Siemens Sinumerik 840D Max. workpiece height: 2,000 mm Accessories - Hexagon wireless measuring probe - Loading stations: 2 units Year of manufacture: 2001 (See also other offers from this seller.)

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: N2097535010017,

Kondisi: bekas, Tahun pembuatan: 2005, Technical details: Machine weight approx.: 8 t Space requirement approx.: 2.95 x 1.6 x 2.36 m Chuck diameter: 250 mm Swing diameter: 265 mm X-travel: 170 mm Z-travel: 200 mm Spindle speeds: 1,500 rpm Spindle bearing diameter: 100 mm Ndjdpfoizlh Hjx Ab Ejd Pick-up machine *

Kondisi: siap digunakan (bekas), Max. wheel diameter: 150 mm Wheel width 1: 200 mm Module – max.: 4 Module – min.: 1 Control: Sinumerik 840 D Table diameter: 140 mm Axial adjustment – max.: 200 mm Cutter arbor: ISO 40 Max. cutter diameter: 130 mm Max. cutter length: 220 mm Cutter speeds – stepless: 300 – 1200 rpm Cutter slide traverse – max.: 170 mm Milling head – swiveling: + / – 45° Feed rate: 1 – 1500 mm/min Rapid traverse speed: 3000 m/min Max. workpiece diameter in magazine: 150 mm Total power requirement: 50 kW Machine weight approx.: 8.5 t Nsdpfx Aevzhg Neb Eedd Space requirement approx.: 4.7 x 3.6 x 2.6 m Used CNC Gear Hobbing Machine, Manufacturer: Pfauter, Year of manufacture: 1992, completely overhauled in 2013 by SerWeMa (specialist company), equipped with Siemens Sinumerik 840 D control and workpiece magazine. This is a pre-owned machine; therefore, we sell under exclusion of any warranty.

Tahun pembuatan: 2007, Kondisi: bekas, Wheel diameter – max. 400 mm Wheel width – mm Module – max. – Workpiece diameter 36-300/400 mm Center distance 135-290 mm Spindle speeds – infinitely variable 3000 rpm Centre distance 100-550 mm Control system Machine weight approx. 4,000 kg Space requirements approx. 2000 x 3055 x 2788 mm CNC control Siemens 840 D Test procedures: Ndodpfxogr Hars Ab Esd - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli-test under double flank contact Features: - Operation with up to 6 test slides - Maximum test accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (Type: Vogel) - Oil mist extraction (Type: Elbaron)

Kondisi: bekas, Tahun pembuatan: 2007, Maximum gear cutting diameter: 2,000 mm Workpiece diameter: 2,700 mm Table diameter: 1,500 mm Maximum module: 22 Control: 840D Rotational speed: 3.5 rpm Maximum table load: 20,000 kg Centre distance: 70 – 1,220 mm Stroke length: 30 – 330 mm Strokes per minute: 10 – 200 spm Total power requirement: 138 kW Machine weight: approx. 38 t Space requirements: approx. 11 x 5 m Machine: Fully CNC machine with electronic gear coupling for C and D axes and digital INDRAMAT drive technology. Self-rigid machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with overhang, Longitudinal guide with recirculating roller shoes. Ground, preloaded ball screw with backlash-free preloaded nut. Digital AC drive technology with backlash-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically backlash-free preloaded double worm gear, pitch circle diameter 1,365 mm, hydrostatic axial and radial bearings, automatic workpiece weight compensation. Through-table bore diameter 500 mm, open downward. Water-cooled digital AC servo motors. The machine must be installed on a foundation. Column: Machine column as high-rigidity cast construction for axial travel 1,200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and overhang with recirculating roller shoes. Ground ball screw with backlash-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Gear Shaping Head: SK 4.1 with hydraulic NC servo drive for stroking spindle movement and cutter lift-off, stroke length 330 mm, stroking spindle diameter 160 mm. Hydrostatically mounted stroking spindle, straight guide, and lateral guide for cutter lift-off. Maximum tool diameter: 300 mm. Drive motor power: 30 kW Stroke rates from 10 – 200 spm, stroke speed from 5 – 45 m/min. Stroking spindle speed for cutting and return stroke can be independently programmed. Spindle speed is constant in the cutting area. Maximum cutter head rotational speed: 10 rpm, digital AC drive technology. Njdpfx Abov E R Eis Esdd Cutter lift direction manually reversible for internal and external gearing. Lateral offset of the stroking spindle axis by up to 50 mm from machine center manually adjustable to avoid collision of cutter during return stroke.

Kondisi: bekas, Tahun pembuatan: 1999, Wheel diameter – max. 280 mm Wheel width 330 mm Module – max. 5 Module – min. 1 Control LIEBHERR CNC Total power requirement 28 kW Machine weight approx. 12 t Space requirement approx. m L I E B H E R R CNC-controlled Gear Hobbing and Profile Grinding Machine Type LCS 282 Year of manufacture 1999 # 1099 _____ Max. wheel diameter 280 mm Module 1 - 5 Helix angle +/- 35° Distance table center to tool center 15 – 285 mm Grinding slide vertical stroke 330 mm Shift path/tool travel 200 mm Min. number of teeth 7 Grinding spindle position above table min./max. 70 - 360 mm Workpiece clamping length 420 to max. 620 mm Grinding worm / profile grinding wheel Ø 145 x 210 / 175 mm Grinding worm/profile tool speed 2,500 – 10,000 rpm Max. table speed 750 rpm Spindle drive 28 kW Total drive approx. 50 kW - 400 V – 50 Hz Total weight approx. 12,000 kg Accessories / Special Equipment • LIEBHERR CNC control Type LH 90 GG is an easy-to-program CNC control unit (B+R/IPC 5000) with gearing-specific operator interface and diagnostics functions for fast troubleshooting. (Remote diagnostics also possible) • Equipped with automatic threading device for inserting the grinding wheel into the tooth gap • The machine operates with three grinding methods: a. Generating grinding with CBN grinding worms = fastest processing b. Profile grinding with CBN profile grinding wheels (one or two wheels) = highest precision machining! c. Combination of a and b (most economical solution): pre-grinding with grinding worm / finish grinding with the profile grinding wheel in single part operation • Automatic shifting of the grinding worm or automatic positioning of the profile wheel • Automatic workpiece loading device with a ring loader mounted to the counter column, which automatically loads raw and finished parts. The workpieces are conveyed to the ring loader via a separate FLEX LINK chain conveyor, picked up and also removed. This enables unmanned operation. • Hydraulic workpiece clamping in the table, but without clamping fixtures. Tailstock carriage is present on the counter column, but without tailstock itself. Carriage stroke up to approx. 350 mm • Complete work area enclosure with sliding door and separate CO2 extinguishing system/IR sensor No original coolant system (since there is central supply), and no dresser available Condition : good to very good – demonstration ready under power, compact design! Delivery : ex stock - as inspected Payment : strictly net - after receipt of invoice Ndedpfet Hwu Aox Ab Ejd We appreciate your interest – over 200 gear machines in stock at all times.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Niles ZSTZ 630 C3P bekas yang telah direkondisi. Diameter roda gigi maks.: 630 mm Lebar roda gigi: 215 mm Nodpfx Aexaptkeb Esdd Modul maks.: 12 Modul min.: 1 Panjang langkah: 225 mm Diameter meja: 500 mm