Mesin bubut CNC

HYUNDAI WIA SE2000 MA

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, jam operasional: 7.100 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 650 mm, diameter putar di atas sled silang: 350 mm, diameter pembubutan: 385 mm, kecepatan spindel (min.): 4.500 rpm, lubang spindel: 67 mm, jarak pergerakan sumbu X: 255 mm, jarak gerak sumbu Z: 800 mm, For sale: Used DMG NEF400 V3, 5th Generation ISM 2-axis universal lathe with C-axis. Travel distances: X: 255 mm Z: 800 mm Swing diameter over bed: 385 mm Max. workpiece diameter: 350 mm Turning length: 650 mm Equipment: - Main spindle as integrated spindle motor Max. speed: 4,500 rpm Drive power: 8.0/11.5 kW (100/40% duty cycle) Gisdjxzqnrspfx Adtol - 12-position disk turret VDI30 with 6 powered tool stations - C-axis and spindle brake (hydraulic) - Automatic tailstock, MT4, travel: 680 mm - CNC control: Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate, and ShopTurn 3G - Operating system: Linux - Technology cycle for applying alternating speed for vibration-critical setups - Tool measurement system, manually deployable in the workspace - Hydraulic unit - Coolant spray gun - Mechanical oil mist separator - Reinforced coolant pump 12 bar, 23 l/min - Chip conveyor, discharge height 1,250 mm, discharge to the right Bar machining package including: - Workpiece pick-up device with left-discharge conveyor for parts up to max. 65 mm diameter, 150 mm length, max. 3 kg weight - Hollow clamping device, draw tube internal diameter max. 67 mm - Interface for bar feeder - Foot switch for tailstock operation - Hydraulic three-jaw chuck SMW-AUTOBLOK, RMS sensor (Relocation Machine Security) Machine available immediately! Ready for operation upon delivery! We will load the machine for you! Transport can be organized upon request!

Kondisi: bekas, Tahun pembuatan: 2004, en-GB_001 Gijdpotzyx Tsfx Adtol

Kondisi: bekas, CNC lathe with Y-axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T - Spindle nose: ASA 5 - Main spindle power: 15 kW - Self-centering diameter: 175 mm - ASA 5 spindle connection - Bar capacity: 52 mm - Turning diameter: 230 mm - Turning length: 500 mm - Max. spindle speed: 5,000 rpm - Number of tool turrets: 1 - Number of tool stations on first turret: 12 - Number of driven tool stations on first turret: 12 Gsdpfxeqn E U To Adtoil - First turret tooling system: VDI 30 - X-axis travel: 160 mm - Y-axis travel: ±32 mm - Z-axis travel: 550 mm - Rapid traverse rate (X/Y/Z): 30 m/min - Sub-spindle: yes - Sub-spindle nose: ASA 5 - Max. sub-spindle speed: 5,000 rpm - Sub-spindle power: 9 kW - Sub-spindle bar capacity: 30 mm - Bar loader model and brand: LNS with single bar tube - Chip conveyor: belt type - Tool presetting: yes - Year: 2000 The machine is in our warehouse in Gussago (BS), under power. Mimu Machine Tools Italy

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 1.200 h, X 800 mm Y 460 mm Z 510 mm Gisdpfxjv Th E As Adtel Styrsystem: FANUC Spåntransportör Inklusive 4-axlig rundbord.

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Parts Cleaning Machine / Spray Cleaning System Type TR450 The spray rotation cleaning system type TR450 is an automatic cleaning and degreasing machine equipped with an easy-to-open upward lid. The unit is designed for cleaning individual parts and/or bulk material in baskets sized LxWxH 520x320x200h mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on ensuring a gentle agitation of parts within the basket when dealing with bulk material; the fill level in the basket must therefore be observed. Additionally, the system is equipped with a flood tray beneath the product basket, allowing for immersion scooping of the parts for even better cleaning results. Including the following features: • Complete internal and external construction in stainless steel 1.4301 • Level monitoring and automatic fresh water refill • Full system insulation • Hot air drying (capacity: 11.6 kW) Gijdpefbt Sisfx Adtjl • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket 520x320x200h mm, mesh size: 6x6 mm, incl. height-adjustable closure lid Connected load: approx. 20 kW (32 amp plug)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Siemens control Bar capacity 32 mm Giedpfxowh U Edo Adtsl 2 x 12-station turrets with driven tools Main / counter spindle Y-axis on upper turret Parts catcher Chip conveyor IRCO bar feeder magazine

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Pemegang alat: VDI 30 Revolver alat: 12 posisi Kecepatan spindle utama: 5.000 rpm Daya penggerak: 16,5 kW Giodpfx Adsx Nnbhjtol Termasuk penyaji batang Termasuk dokumentasi

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Max. load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM-Type) / changer: Magazine capacity: 30 tools System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300-liter tank and pumps External coolant around spindle Chip spirals right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Fully enclosed Work light Heat exchanger on control cabinet Auto power off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation space: W3,160 x D3,000 x H3,000 mm (including chip conveyor discharge to the left) Machine weight: approx. 5,400 kg (net) Included special equipment: Spindle: Godpfx Adoifn N Netoil - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 slots, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis driver Coolant, chip, and compressed air management: - Bed wash - Through-spindle coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip bin (chip discharge front to left machine side) Measuring and monitoring systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage control in the machine, incl. holder - Auto-door (side door) - Pneumatic interface for workpiece clamping - Included clamping devices as shown with RoboJob Mill Assist 25kg (Year 2025 - NEW) - Full enclosure - Double gripper Immediately available

Kondisi: bekas, techdata-cnc-lathe Gsdpfx Ajuhbnujdtjil

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 2.200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: G3158-0645, de Gjdpfx Adsw Dcdystsil