Pengumpan bar

IEMCA BOSS 552 HD / 32LL

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 Bwjdpfx Asuha Nwequjt MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 210 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm FRONT TOOLPOST - Number of positions: 5 BACK WORKING STATION - Number of positions: 4 - Number of driven positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Spindle hours: 18,849 h ACCESSORIES - CNC control: Fanuc 31i-model A - Driven tool motorization at: S11, S21, S51 - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * With high-pressure pump: 20 bar - Bar feeder: TORNOS SBF320 - Electrical transformer - Number of driven tool holders: 5 - Double drilling/milling tool holder: 1

Kondisi: bekas, 🧰 Fitur Produk • Kondisi: Barang bekas, lihat foto • Warna: abu-abu • Bahan: Logam • Dimensi luar: 124 x 83,5 x 45 cm • Kapasitas beban: 1000 kg • Kapasitas beban bertumpuk: 4000 kg • Berat: 56 kg • Sisi depan dapat dilipat • Termasuk dasar logam 💰 Harga € 59,- (belum termasuk PPN) • Diskon kuantitas: berdasarkan permintaan • Biaya pengiriman: di seluruh Eropa, berdasarkan permintaan Bwedpfx Asw Eb Sloquet • Waktu pengiriman: Tersedia segera • Inspeksi dan pengambilan: dapat dilakukan kapan saja dengan perjanjian Selalu tersedia lebih dari 5000 meter rak palet dari berbagai produsen. (Perubahan dan kesalahan dalam data teknis, spesifikasi, dan harga, serta penjualan antara waktu diizinkan! Lihat Ketentuan Umum kami, semua harga tidak termasuk PPN, dari gudang.) Lenox Trading – Penyedia terkemuka untuk peralatan gudang & rak beban berat bekas & baru Teks deskripsi: Apakah Anda mencari rak gudang berkualitas tinggi untuk dibeli? Dengan sekitar 100 karyawan, Lenox Trading adalah salah satu pedagang terbesar untuk peralatan gudang baru dan bekas di seluruh wilayah DACH (Austria, Jerman, Swiss). ⚡ TERSEDIA SEGERA: • Lebih dari 10.000 meter rak tersedia untuk pengiriman segera • 20.000 m² platform gudang & platform baja tersedia segera • 30–50 truk trailer penanganan barang setiap minggu untuk pilihan maksimal 📦 RANGKAIAN PRODUK KAMI (BELI SECARA ONLINE DENGAN HARGA TERBAIK): Baik itu rak palet, rak beban berat, rak tinggi, rak dengan rak, rak ban, atau rak untuk kontainer IBC – kami mengirimkan dan memasang di seluruh Eropa dengan TIM KAMI SENDIRI! Termasuk perencanaan CAD, transportasi, pembongkaran, dan pemasangan. 🏭 MEREK TERBAIK BEKAS & DARI LIKUIDASI / KONKURS: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Tipe MPB, Tipe E, Rak beban berat Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Rak lengan (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 BISNIS KAMI YANG KEDUA: LELANG ONLINE & LIKUIDASI Untuk pembongkaran dan pembersihan, kami menawarkan paket lengkap yang sebenarnya: 1. Pembelian sekaligus: Pembelian barang dagangan, perlengkapan & seluruh stok gudang termasuk pembersihan menyeluruh. 2. Lelang komisi: Pelaksanaan lelang atas permintaan. Layanan lengkap kami oleh karyawan kami sendiri: katalogisasi, persiapan kantor, inspeksi, penyerahan barang, logistik, pembongkaran, dan penyerahan dalam keadaan bersih. Baik Anda menemukan kami melalui rak beban berat atau mencari rak beban berat yang dilapisi seng / sistem rak beban berat – kami menjamin kondisi terbaik. Hubungi kami untuk penawaran tanpa kewajiban!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, mikron-hpm-1350u-2011-5-axes-hu Bsdpfx Aqoy Tv Nbsuewt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 4.500 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 090119, Origin of manufacture: CE - Germany Voltage: 400V Net weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h - Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm B-axis rotary range: 0.0001 – 360° C1/C2-axis rotary range: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum weight: 5 kg TURRET HEAD Number of positions: 24 Number of controlled positions: 18 Number of fixed positions: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16x16 mm (20x20) Maximum turret head trajectory over tool tip: 500 mm Rotating tool speed: 1–9,000 rpm SPINDLE Maximum speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR PROCESSING Maximum bar length for bar feeder: 1,000 mm Maximum workpiece size for bar gripper: Ø42 x length 100 mm Maximum diameter for collet gripper: 42 mm Clamping cylinder pull and push force: 20,000 N FEED FORCES Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse axes X/Y/Z: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm Bodpfxoht Hg De Aqujwt COOLING (Flow rate) Output of immersion pump in chip conveyor: approx. 10 l/min at 4.5 bar 80 l/min at 3.2 bar 150 l/min at 0.7 bar High pressure pump flow rate in conveyor: 10 l/min at 13.2 bar 50 l/min at 9 bar 90 l/min at 1 bar Lubricant volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROL: Siemens 840D WORKING ACCURACY Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Accuracy: 0.6 µm Maximum runout error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor axes X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulics return: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Cooling unit circulation pump: 1.1 kW Cooling unit compressor: 2.2 kW Chip conveyor: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Control voltage: 400 V Network frequency: 50Hz (60Hz optional) Control circuit voltage: 24V DC Total power consumption: 35 kW Rated current: 63A Connection: Network TM / TT / IT PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Solenoid voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 according to Pneurop 6611 NOISE LEVEL Normal operation: 78–80 dB All technical data are provided subject to errors or omissions and are non-binding. Inventory No. 2321018, Machine consisting of: Chip conveyor Prepared for bar loader connection Tool holders: 6 stationary drills ER32 8 turning tool holders 5 driven tool holders ER32 4 driven tool holders ER25 6 driven tool holders ER20

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 24.140 h, berat keseluruhan: 10.000 kg, produsen pengendali: FANUC, model controller: 31i-NT-SmartX, jumlah sumbu: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017 and features a bar capacity of up to 65 mm, as well as two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. It comes equipped with a Samsys bar feeder, an Absolent extraction system, and a wide range of automated features, including through-spindle coolant supply, parts catcher, and automatic tool presetting devices. Seize the opportunity to purchase this Nakamura NTJ100 turn-mill center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: Han-Bei probe for automatic workpiece measurement (infrared or radio) for both left and right spindle • Left and right, with automatic swivel and 2x 4 measuring directions for fast, precise tool presetting via NC function • Operating hours: 43,399h • Coolant system: Coolant through spindle (CTS); coolant float switch for machine stop at low level; additional coolant flush through both spindles (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck air blow device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connecting stub Ø 150 mm • Robot/automation preparation: Pneumatic flap for robot handling on the top of the door, opening approx. 400 x 400 mm • Handwheel for manual positioning of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Three-color signal light Bjdpfx Ajx D Iuzjqujwt The Samsys bar loader with 1.5 m loading length has the following dimensions: Length: 225 cm + 43 cm intermediate guide; Width: 120 cm (including loading ramp and control panel); Height: 145 cm or 180 cm with open hatch The machine was mainly used for machining aluminum (95%). Additional equipment: • Samsys bar feeder, including extension • Absolent extraction unit • Hinged belt chip conveyor with interface, interval control, and alarm monitoring

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.900 mm, lebar total: 1.350 mm, panjang total: 1.710 mm, kecepatan rotasi (min.): 1.000 rpm, daya: 5,5 kW (7,48 hp), spyra-chip-centrifuge-600h Bjdpjw Nqu Ajfx Aqujwt

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 2.2 / 3.7 [kW] - Spindle speed: 200 - 10,000 [rpm] - Max. bar diameter: 20 [mm] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Spindle drive power: 1.5 / 2.2 [kW] - Spindle speed: 200 - 12,000 [rpm] - Minimum C-axis resolution: 0.001 [deg] * Travel X/Z: 488 / 335 [mm] TURNING-MILLING SPINDLE - Travel X/Z: 289 / 305 [mm] - Travel Y: 75 (-15/+60) [mm] - B-axis stroke: 180 [deg] - Minimum B-axis resolution: 0.001 [deg] - Tool type: 15T - Spindle speed: 300 - 30,000 [rpm] - Spindle drive power: 3.7 / 5.5 [kW] TOOL CHANGER - Tool changer type: Parapluie Bwsdpfeu Uu Sysx Aquot - Number of tools in magazine: 24 OPPOSITE MACHINING - Number of positions: 4 - Number of positions: 3 WEIGHT AND DIMENSIONS - Machine weight: 2,700 [kg] MACHINE HOURS - Power-on hours: 52,500 [h] - Operating hours: 11,639 [h] ACCESSORIES - Control: Fanuc 31i Model B5 - 3-color status lamp - Coolant tank: Hydro-Fluid HP3 * with high-pressure pump: 40 - 170 [bar] - Chip conveyor - Spindle cooling - Parts removal - Parts conveyor belt - Bar feeder: LNS EXPRESS 220 S2 - Fire extinguishing system* * NB: Functionality not guaranteed. Inspection by a qualified third-party company recommended. - Electrical transformer

Kondisi: bekas, Tahun pembuatan: 2007, tinggi total: 2.800 mm, panjang total: 3.000 mm, lebar total: 2.500 mm, berat keseluruhan: 8.300 kg, Mikron HSM 800 – Pusat Pemesinan Kecepatan Tinggi Tahun Pembuatan 2007 | Heidenhain iTNC 530 | 24.000 rpm | Pengganti Palet 3 Posisi Pusat pemesinan CNC berpresisi tinggi dari Mikron / GF AgieCharmilles, dirancang untuk pemesinan HSC yang menuntut dalam pembuatan cetakan, area grafit dan elektroda, serta untuk produksi seri yang fleksibel. Rentang pergerakan sumbu X 800 mm / Y 600 mm / Z 500 mm dengan ukuran palet 800 x 600 mm. Dilengkapi dengan pengganti palet 3 posisi untuk proses produksi yang efisien. Bedpfx Aqey Tkc Ajuswt Mesin ini memiliki spindel kecepatan tinggi dengan kecepatan hingga 24.000 rpm, dudukan HSK-A63, dan pengganti alat 50 posisi. Peralatan lengkap termasuk sistem tekanan tinggi IKZ (18–70 bar) dengan filter pita, konveyor serpihan, pelumasan jumlah minimal, penyedot kabut oli, jendela penglihatan yang berputar, serta peralatan pengukuran (M&H). Dilengkapi juga dengan APS (Sistem Proses Tingkat Lanjut) dan ITC (Kontrol Termal Cerdas) untuk keamanan proses dan stabilitas termal yang optimal. Pengendali: Heidenhain iTNC 530 Kecepatan spindel: 24.000 – rpm Rentang pergerakan sumbu Y: 600 – mm Dimensi area penjepitan: 900 x 600 mm Rentang pergerakan sumbu Z: 500 – mm Rentang pergerakan sumbu X: 800 – mm Dimensi (P x L x T) kira-kira: 3000 x 2500 x 2800 mm Berat kira-kira: 8.300 kg Tahun Pembuatan: 2007 Kondisi: berfungsi Ketentuan pembayaran: 100% uang muka sebelum pengiriman Ketentuan pengiriman: dari fondasi Siap digunakan: Ya

Kondisi: bekas, DATA TEKNIS - Jumlah sumbu: 5 - Jumlah spindle: 3 SPINDEL UTAMA - Daya penggerak spindle: 11 [kW] - Putaran spindle: 6000 [rpm] - Diameter maksimal batang: 52 [mm] - Resolusi minimum sumbu C: 0.0001 [derajat] SPINDEL LAWAN - Daya penggerak spindle: 7.5 [kW] - Putaran spindle: 6000 [rpm] - Diameter maksimal batang: 38 [mm] - Resolusi minimum sumbu C: 0.0001 [derajat] Bwsdpey I Dixjfx Aquot SPINDEL PUTAR-MILLING - Perjalanan sumbu X/Z: 455/800 [mm] - Perjalanan sumbu Y: 105 [mm] - Jangkauan sumbu B: 120 [derajat] - Resolusi minimum sumbu B: 0.0001 [derajat] - Tipe alat: HSK50 - Putaran spindle: 30000 [rpm] - Daya penggerak spindle: 9 [kW] PENUKAR ALAT - Jumlah alat pada majalah: 76 REVOLVER BAWAH - Jumlah posisi: 10 - Jumlah posisi bermotor: 10 - Kecepatan alat gerak: 6000 [rpm] SUPLAI LISTRIK - Tegangan suplai: 380 [V] - Daya total: 48 [kVA] JAM OPERASI MESIN - Jam operasi: 18186 [jam] AKSESORIS - Kontrol: FANUC 31i MAPPSIV - Sistem pengukuran jalur langsung - Pilihan tailstock dengan spindle lawan - Perangkat pengukur alat - Perangkat pengukur benda kerja: Renishaw - Majalah batang: IEMCA KID 80 - Transformator listrik

Kondisi: bekas, Tahun pembuatan: 2015, Turning diameter: 250 mm Turning length: 600 mm Control: FANUC Series 31i-Model A Total power requirement: 23 kW Machine weight: approx. 7.7 t Space requirement: approx. 2,880 x 2,130 x 1,990 mm CNC turning and milling center SPINNER TTS 65 Triplex Year of manufacture: 2015 Control: FANUC Series 31i-Model A MACHINE DETAILS Turning diameter: 250 mm Turning length: 600 mm Travel path - X: 180 mm Travel path - Y: +/-45 mm Working area Z1, Z3 / Z2: 704 / 620 mm Rapid traverse: 30 m/min ----- Main spindle ----- Spindle speed: 0 - 5,000 rpm Bar capacity: 65 mm Spindle power: 18 / 23 kW Torque: 151 Nm Spindle nose: DIN / A6 ----- Counter spindle ----- Spindle speed: 0 - 7,000 rpm Bar capacity: 42 mm Spindle power: 16.5 / 22 kW Torque: 128 Nm Spindle nose: Flat flange 110 mm ----- Upper turret 1 ----- Position: Top left in working area Number of tool stations: 12, all driven Tool holder: BMT 45 Independent axes: X1 / Y1 / Z1 ----- Upper turret 2 ----- Number of tool stations: 12, all driven Tool holder: BMT 45 Independent axes: X2 / Z2 ----- Lower turret 3 ----- Number of tool stations: 12, all driven Tool holder: BMT 45 Independent axes: X3 / Y3 / Z3 ----- Tool spindle speed: 8,000 rpm Power: 4.3 kW Torque: 13.6 Nm Number of tool holders: 36 Axes: C1, C2, X1, X2, X3, Y1, Y3, Z1, Z2, Z3 ----- Bar feeder: X-Files-S, simple surface loading, 300 mm (3 meters), Ø 10 - 65 mm Bar length: 3.2 m Bar feeder year: 2022 Weight: 2,200 kg Bsdpfoy Ralnox Aquswt ----- Chip conveyor: TD/TTS with 15 bar, 13 bar = 10 l/min, with settling filter Coolant tank capacity: 200 l ----- CNC turning and milling center | SPINNER - TTS 65 Triplex equipped with main and counter spindle, both including C-axis, 3 Triplex turrets for driven tools, and a bar feeder [Top Automazioni X-Files-S Series 3000 Version SX]. The machine has only 3,500 hours of machining time. The machine is in good condition and can be inspected under power. With many accessories/tools.