Pemuat batang

IEMCA TAL/AUTO 65/32

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7213, Country of manufacture: Switzerland Net weight: approx. 2,550 kg Customs tariff code: 8458.11 20 Dimensions: 2,000 x 1,260 x 1,950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool carriers: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent secondary-operation rotating axis: X4, S5 Bar feed position: right of operator Machine axis height: 1,100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Maximum workpiece length Isdpfx Ahow T Tcwsyjih Guide bushing machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bushing: fixed / rotating Collet for guide bushing, type: Meister 605 Number of combined side tools: fixed: 2 x 5 / rotating: 3 + 3 Number of combined front tools: fixed: 4 / rotating: 3 Number of combined rear tools: fixed: 3 + 3 / rotating: 3 + 3 Tool section: 12 x 12 mm Rotary tool holder collet: standard ESX 20 Bar feeder: yes Parts catcher: yes All technical data provided without obligation and subject to errors or omissions.

Kondisi: bekas, Tahun pembuatan: 1988, en-technical-details Technical Details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Spindle speeds: 47-94 rpm Feed rate: 0.5 - 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40 mm, min. thread diameter 3 mm up to 3.5 mm pitch, max. pitch 1.75 mm Roll width min. 80 mm, max. 120 mm Shaft speed 47-94 rpm Iijdpfow D Aq Tjx Ahysh Roller shaft diameter 40 mm various rollers as accessories

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Ijdpfxjuz If Ns Ahysih Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: baik (bekas), LNS Stangenlader Iedpfxsr Iygis Ahyjih

Kondisi: bekas, rollensaetze-herkuleswetzlar Iisdpfx Asglaq Iehysh

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Rotary Welding Table KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Isdpfx Ahsc Ug Tljyjih Table diameter: 450 mm Height: 500 mm Tilt range: stepless adjustment via hand-crank gear motor, 0 - 90° Rotation speed: 0.3 to 2.5 rpm Including foot remote control Surcharge: Quick-release chuck Diameter: 300 mm, €450

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 3253-80, Offer 22045 Iodoktg Dhjpfx Ahyoih Technical data (approx.): - Pressing force: 10 t - Throat depth: 150 mm - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Table through hole: 165 x 125 mm - Max. daylight (installation height): 220 mm - Ram area: 240 x 150 mm - Ram bore (taper hole): 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 - 60 mm - Strokes per minute: 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Required floor space (approx.): W 1000 x H 1800 x D 1100 mm - Weight (approx.): 1300 kg

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3467, Manufacturing origin: Switzerland Net weight: 3000 kg Customs tariff number: 8458.11 20 Dimensions: 215x150x215 cm TECHNICAL SPECIFICATIONS (standard) Headstock (Z1 axis) (+C axis optional) Maximum bar capacity: dia. 20 mm Ijdpow Uczxsfx Ahyoih Maximum part length depending on guide bush type: 200 mm Programmable spindle speed: 0-12,000 rpm Positioned stop and indexing, increment: 0.1 degree Maximum spindle power: 3.7 (5.5) kW Tool carrier (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes): 2 x 5 Tool section: 16 x 16 mm Number of transversal drilling/milling stations on turret: 4 Programmable rotation speed: 0-8,000 rpm End-working attachment (X3/Y3) Maximum number of end-working tools: 4 Programmable rotation speed: 0-8,000 rpm Sub-spindle and counter operations (X4/Z4) (+C axis optional) Maximum clamping diameter: 20 mm Programmable rotation speed: 0-12,000 rpm Positioned stop and indexing; increment: 0.1 degree Maximum number of counter operations: 7 Number of fixed or rotating spindles: 7 Maximum spindle rotation speed: 8,000 rpm Specific CNC system: Tornos-Bechler/Fanuc Processor type: 486 DX2 Number of simultaneous axes: all Unless otherwise specified, these technical details are provided without commitment and are subject to errors or omissions.

Tahun pembuatan: 1990, Kondisi: baik (bekas), nomor mesin/kendaraan: 3-201065, Max. material passage in feed tube: 65 mm Isdpfx Aedlm Dhshyjih for material lengths up to: 3000 mm Feed force steplessly adjustable up to max.: 550 N Loading time approx.: 30 s electrical connection/power requirement: 380 V/1.5 kW Space requirement: 5810 x 920 x 1515 mm Weight: 1200 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Max. bar diameter 65 mm Max. bar length 3000 mm Isdpfxjin Hkmo Ahyeih