Mesin thermoforming

Illig UA 155 G Solo/ BE

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Commissioned: 2013 Control: Heidenhain iTNC 530 including HR 520 handwheel Machine Hours Power-on hours: approx. 40,700 h Spindle hours: approx. 17,100 h Spindle hours, current milling spindle: approx. 150 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool interface: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed rate X/Y/Z axis: up to 60 m/min Axis acceleration X/Y/Z axis: up to 5 m/s² The machine is currently set to the following basic values due to limited available power supply on site: Feed rate X/Y axis: up to 40 m/min Feed rate Z axis: up to 30 m/min Axis acceleration X/Y/Z axis: up to 2.5 m/s² Power data Connected load: 190 kVa Main fuse: approx. 315 A The machine can be reset to original values at any time if sufficient power supply is available. Current reduced connection values: Connected load: 130 kVa Main fuse: approx. 250 A Dimensions, weights Space requirement with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Color Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration unit - 50-position chain tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Lhodpfxjwa T Hks Ac Asp Optional at extra charge: - Renishaw RMP60 radio probing system - BLUM Control NT Condition of the machine Fully functional, in very good condition. Already dismantled and in storage.

Kondisi: baik (bekas), Tahun pembuatan: 2011, Merek: WM Model: FC 780E Tahun: 2011 Kondisi: Sangat Baik Lhjdpfx Aottlzfjc Aop Perkiraan Jam Kerja: 25.390 Stasiun: Pembentukan, Pemotongan dan Penumpukan Ukuran Maksimal Perkakas: 780 x 570 mm Kedalaman Tarikan: 130 / 130 mm Lebar Material Maksimal: 810 mm Ketebalan Lembar Maksimal: 1,8 mm Gaya Penutupan Cetakan Maksimal: 20.000 daN Siklus Maksimum per Menit: 45 Tekanan Pembentukan: 7 bar Semua detail dapat berubah dan/atau terjadi kesalahan. Semua peralatan tergantung pada ketersediaan dan/atau telah dijual sebelumnya.

Tahun pembuatan: 1974, Kondisi: bekas, Druck: 340 t Hub: 200 mm Tischgröße unten: 100 x 800 mm Abstand zwischen Ober- und Untertisch: - geöffnet: 510 mm (Lichte Weite) - geschlossen: 310 mm Neue Hydraulik- und Elektriksysteme Lhodpfx Acj Du Uwj Aep

Kondisi: bekas, Tahun pembuatan: 2018, x-axis travel: 1,800 mm y-axis travel: 700 mm z-axis travel: 700 mm Control: Siemens 840 D sl op. (CELOS) Main spindle speed range: 20 – 20,000 rpm Main spindle drive power: 35 / 25 kW Max. torque: 130 / 86 Nm Tool holder: HSK-A63 Swivel range B-axis: +/- 100° Table clamping surface: 2,100 x 700 mm Max. table load (1,500) kg Number of T-slots: 7 Table diameter: 750 mm Max. rotary table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm Table height: 255 mm Rotary axis C: 360° Rotary table speed: 16 rpm Resolution: 0.001° Number of tool stations: 60 positions Tool holder: HSK-A63 Ledpfsxr Racex Ac Ashp Max. tool weight: 6.0 kg Max. tool diameter: 80 mm Max. tool diameter with free adjacent station: 130 mm Max. tool length: 300 mm Tool change time (chip-to-chip): 7.6 sec Rapid traverse (X/Y/Z): 40 m/min Acceleration: 4 m/s² Feed rate max.: 40,000 mm/min Feed force (X/Y/Z): 8 kN Total connected load: 73 kVA Machine weight approx.: 13.7 t Space requirement approx.: 7.5 x 6.5 x 3.0 m 5-axis CNC travelling column milling machine DMG MORI - DMF 180-7 - SpeedMaster motor spindle - Swivel milling head (B-axis) - Rotary table integrated into fixed table - Internal coolant supply - Spindle, Y-axis, and B-axis clamping overhauled in 04/2025

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, diameter sekrup: 38 mm, This machine is currently in storage at Plastima Used Machinery. Lhjdpfevcqccjx Ac Aop

Kondisi: bekas, Tahun pembuatan: 2013, nomor mesin/kendaraan: 15513, Polishing and grinding machine with versatile applications, suitable for tasks ranging from polishing high-gloss furniture fronts to grinding and polishing kitchen countertops. - Easy changeover between polishing and grinding head. - Equipped with tool head oscillation for a more uniform, higher-quality grinding or polishing surface. - With automatic part detection. Technical specifications: - Model: HBS 1600-750 (800) -100-1 - Year of manufacture: 2013 - Electrical connection: 400V, 50 Hz, 4.5 kW, 10 A - Compressed air: 5 bar - Conveyor belt: 1,600 mm x 940 mm - For rectangular parts only - Part width: 90 mm – 750 mm (without tool bridge 850 mm) - Part length: 150 mm – 2,800 mm - Part thickness: 8 mm – 100 mm (work height extension possible) - Frame dimensions: 1,600 mm x 1,200 mm - Frame height: approx. 960 mm ± 25 mm - Frame material: welded steel tubing - Superstructure supports: aluminum profiles - Belt cleaning: manual every 8 hours - Safety features: emergency stop. The machine must be enclosed with protective barriers on-site if supplied without an enclosure. - Polishing motor: 400V, 50 Hz, 0.75 kW with planetary gearbox - Controls: Siemens/Vipa S7 PLC, parameters via 7-segment displays, KEB frequency inverter - Control panel functions: ON/OFF, RESET, START/STOP, program interruption, polishing/grinding head speed, belt speed, and tool head oscillation speed Lhjdpfx Aceu Afu Dj Asp - Tool bridge with polishing head, consisting of a linear profile system driven by pneumatic linear cylinders. - Without polishing shoe for polishing head - Location: in stock PICTURES show an identical machine from the same year of manufacture

Tahun pembuatan: 2001, Kondisi: bekas, Max. pressure: 500 t, max. operating temperature: 370°C, oil-heated, oil-cooled, with secondary circuit for heat recovery, overhauled in 2014. Lodpfx Acsdwf Dbs Aohp

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Lisec IG line for double and triple glazing units up to 2500 x 1600 mm, year of construction 1993 - 1999, consisting of: - RTV-38/16WE, washing machine infeed conveyor, 1993 - VHW-16V8, glass washing machine with 8 brushes for Low-E glass, 2 hot water tanks, 2 sand filters and blower, 1993 - RTVB-16/16ST, washing machine outfeed conveyor, 1997 - Sofsolution line scanner - RTVB-11/16 ST, infeed conveyor frame set, 1997 - RSVB-27/16, frame section, 1997 - RTVB-27/16MZ, measuring section for gas filling press, 1997 - FPS-25/16U, argon gas filling press, 1997 - RTVB-22/16ST, outfeed conveyor 1 for the press, 1997 - RTVB-22/16ST, outfeed conveyor 2 for the press, 1997 - RTVB-27/16ST, outfeed conveyor 3 for the press, 1997 - RTVB-11/16, infeed conveyor for cork applicator, 1997 Lhjdpfsr Iil Ejx Ac Aep - APK-3/16, automatic cork application unit, 1997 - RTVB-11/16, outfeed conveyor for cork application unit, 1997 - RTVB-11/16VE, infeed conveyor for sealing robot, 1999 - VL-1N/16, automatic sealing machine for double and triple glazing units, 1999 - VLA-25, VL extension with corner correction rollers, 1999 - DOS-1/PU, mixing and dosing station for PU, with nozzle removal device, 1999

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Helium leak detector Ledpfot Urlrox Ac Aohp Manufacturer: Leybold Model: Phoenix Quadro EU Condition: As new, ready for use, unused from 2022 Connection: 230V Delivery time: ex stock (subject to prior sale)

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jumlah laci: 30, Retractable Shelf for Glass Plate Storage M80-30 Year of Manufacture 2025 / Brand New We are a manufacturer of retractable shelving systems for the storage of glass plates (crates with glass) or other sheet materials (sheet metal, sintered quartz, polycarbonate, furniture panels). Our racks are entirely developed and manufactured by our company in Poland. The materials we use for our shelves are certified for durability and are subject to continuous quality control. Lodjha E S Topfx Ac Ajhp The shelf features extendable, slightly inclined drawers. The system allows you to save up to 75% of storage space, as all compartments are installed parallel to each other and are only 10 millimeters apart. Our range includes racks in various sizes and load capacities. After consultation, we can also produce shelves with customized specifications, taking your individual requirements into account. The inclination of the compartments depends on the installation: it can be to the left or right. We particularly recommend this shelf system for glassworks, stonemason workshops, furniture manufacturers, and advertising workshops seeking to optimize their space. The racks are delivered flat-packed for self-assembly. This process is very straightforward, as our extensive experience has enabled us to design a well-thought-out product—there is no problem assembling it with the supplied instructions. Our technical support department is always available to assist. Should you prefer our technician to supervise the assembly, this can be arranged for an additional fee. TECHNICAL DATA FOR M80-30 SHELF Application: for individual glass plates 255 cm x 160 cm Maximum glass plate size: 275 cm x 170 cm Number of compartments: 30 Width of glass bearing rail: 8 cm Length of glass bearing rail: 308 cm Material on which glass rests: Wooden board 308 cm x 8 cm x 2.5 cm Height of structure (A): 218 cm Width of structure (B): 436 cm Depth of structure (C): 317 cm Required space for proper shelf use: 27 m² Base requirements: smooth/level Number of rollers per compartment: 8 pcs Front wheel: Ø160 / reinforced polyamide Rear wheel: steel ball-bearing wheel / rolled profile Color: RAL 7040 (grey) Corrosion protection: Steel parts phosphated and powder-coated Permissible load per compartment: 900 kg Maximum load capacity of rack: 27,000 kg Inclination of compartments: to the left or right, depending on assembly Assembly time: 14 hours Number of people required for assembly: 2 persons DOCUMENTS SUPPLIED WITH THE M80-30 SHELF - Operating manual - Assembly instructions - Identification plate - Warranty: 12 months The product is supplied fully operational. Our company delivers glass storage racks within the EU and to other countries.