Garis tepi dan jalur pemrosesan

IMA + MEINERT COMBIMA/II/650/A/R3

Kondisi: baik (bekas), Tahun pembuatan: 2011, Internal flange dimensions: 2340 x 1340 mm Maximum panel dimensions (20 mm thickness): 2340 x 1240 mm Working chamber height: 60 mm Total thrust: 300 t Maximum working specific pressure: 5 kg/cm² Pressing cylinders: No. 6, diameter 140 mm, stroke 250 mm Lower movable platen (closing movement from bottom to top) Opening between press platens: 230 mm Hsdpetwba Sjfx Aa Ijp Loading side: 1400 mm PVC roll unwinder Double loading table

Kondisi: seperti baru (mesin pameran), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line consists of the following machines: VZ0200A) Infeed station with double loading unit “BARGSTEDT” Model TBH 500/D/30/12 Hjdpedt Rgvefx Aa Ijp VZ0200B) 1st double-sided sizing and edge-banding machine “HOMAG” Model KFL 525/8/A3/15 VZ0200C) Turnover station (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge-banding machine “HOMAG” Model KFL 526/10/A3/30 VZ0200E) Turnover station (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDL 510/25/12 VZ0200F) Sword brush “WANDRES” VZ0200G) Stacking station with double buffer unit “BARGSTEDT” Model TSP 410/D/25/12

Kondisi: bekas, nomor mesin/kendaraan: 007135, max-panel-width Hedpot Hmppsfx Aa Iop

Kondisi: sangat baik (bekas), twosided single machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm 0.3 / 3 Edge thickness with strip veneer (min/max) mm 3 / 10 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, no power transmission bar (Master & Slave systems) Retractable reference stops, spacing (mm): 1080 PROCESSING UNIT (for each side): Protective milling unit (pre-milling) 75.186 (1 x kW 4.4) Hedpfx Asd Nt Rqea Isp Chipper unit (2 x kW 8) Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue) 283.1513 04.1570 + 283.205 Edge pressure zone - edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multi-function unit (radius milling and profile milling) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.200 mm, berat keseluruhan: 2.000 kg, lebar meja: 1.200 mm, 1 Hedpfxsymcu Ne Aa Isp

Kondisi: bekas, Tahun pembuatan: 2007, Overview The pallet wrapper was manufactured in 2007 by the Italian producer Robopac. The machine was used in a water and CSD production facility, where it formed part of a PET bottling line with a capacity of 27,000 bph. The pallet wrapper was professionally dismantled and requires technical maintenance. Technical Data - Output: approx. 60 pallets at 23 wraps - Operating hours: 45,363 - Pallet top cover function + top pressing unit Scope of Delivery - Pallet wrapper - Belts, rollers - Sensors on conveyor belts (infeed, outfeed, diagonal) Hodpfx Aorwr T Noa Ijp - Spare parts (new and used) - Documentation

Kondisi: sangat baik (bekas), Double-Sided FORMAT & EDGE BANDING MACHINE (First machine in a production line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 - 3 Hjdpfxot N Ix Re Aa Iop Panel Thickness (min/max) mm: 10 - 60 Working Width (min/max) mm: 270 - 1200 Control System / Software: SINITRA Feed Speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and Noise Protection: Enclosed cabin Side Adjustment of Aggregate Carrier: Manual FORMATTING UNIT (for each side): 2 x DT 10 Pre-milling Units (5.8 kW each) Free space for jointing unit FS Jointing Unit ES30 + ER30 (5 kW each) 0° - 90° Universal Milling Unit Softforming SF 10 (2 x 2.4 kW) 0° - 45° Spraying Unit (for liquid release agent) EDGE BANDING SECTION (for each side): Gluing Unit (Hot Melt Adhesive + Pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating Unit RP 10 Edge Pressure Zone (CNC-controlled) Pressure Roller Track (revolver) for Straight Edges and Softforming (softforming) Soft PF40 (4 Pos.) mm 800 (Guillotine CI10+CS10+RL10) - Edge Magazine for Rolls (6 positions) Milling Unit RS 10 (2 x 1.3 kW) Milling Unit Softforming RF 10/SF (2 x 0.65 kW) Multi-profile Milling Unit RF 30 (2 x 0.65 kW) Universal Milling Unit for Grooving/Rebating and Profiling FB 30 (2 x 4.5 kW) 0° - 90° Multi-profile Scraper Unit RB 30 Flat Scraper Unit RC 05 / Soft Spraying Units (for polishing liquid) + Buffing Unit SZ 30 (2 x 0.37 kW)

Kondisi: sangat baik (bekas), Horizontal panel saw with rear lifting table Control: MCS Evolution Software included Lifting table dimensions (mm): 4300 x 2200 No. of rear pushers: 2 (1 with grippers) No. of grippers: 8 Max. cutting width (mm): 4200 Useful stroke of pusher (mm): 4200 Max. saw blade projection (mm): 135 Max. gripper opening (mm): 125 Scoring saw (max. saw diameter): 20 mm Main saw (max. saw diameter/power): 460 mm / 21 kW Adjustable saw carriage feed (m/min): 6 - 150 No. of front air flotation tables with 90° rotation device: 1 (2100 x 4100 mm) Total connected load (kW): approx. 36 Hodpjq Rffisfx Aa Iep

Kondisi: bekas, jenis bahan bakar: bensin, berat kosong: 8 kg, warna: merah, tipe perpindahan gigi: mekanis, Tahun pembuatan: 2024,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: 211 10 017, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 1.415 h, daya: 15 kW (20,39 hp), tegangan masuk: 400 V, arus masuk: 40 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, ketinggian potong (maks.): 170 mm, lebar pemotongan (maks.): 450 mm, diameter mata gergaji: 550 mm, jenis penyesuaian ketinggian: mekanis, lubang pisau gergaji: 80 mm, jenis aktuasi: listrik, kecepatan rotasi (maks.): 2.900 rpm, panjang total: 7.075 mm, lebar total: 1.350 mm, tinggi total: 1.992 mm, berat keseluruhan: 2.700 kg, tinggi meja: 850 mm, tahun perombakan terakhir: 2026, panjang pemotongan (maks.): 5.200 mm, sambungan udara terkompresi: 6 batang, diameter nosel ekstraksi: 160 mm, diameter lubang cakram: 80 mm, lebar meja: 950 mm, tinggi kerja: 850 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, pelindung bilah gergaji, The saw is primarily intended for use in small and medium-sized operations focused on a wide variety of wood processing, but it can also handle non-wood materials. The FLS 170 single-blade saw significantly increases work efficiency and material yield (by 10-15%) and can be used to process beams, planks, squared timbers, and large-format materials. The input material can be edgebanded, ripped, cut to size, and used to produce cut-to-length pieces and lamellas. The maximum cutting height is 170 mm. Operation of the saw can be handled by a single worker. The offered saw is equipped with above-standard features compared to the standard configuration, such as collets on the sliding stop, automatic workpiece ripping mode, two joysticks, and more. More information on request. The machine meets strict occupational safety requirements stipulated by relevant EU regulations and directives. Smooth feed and blade height adjustment ensure a clean cut and high cutting performance. Saw blade replacement is easy and, above all, safe. The saw carriage is fitted with guiding and lateral rollers that provide optimal guidance of the floating saw unit during cutting without unnecessary vibrations. The upper clamp and adjustable wooden stop ensure secure fixation of the material during cutting, thus eliminating unwanted movement. Hedsubbubjpfx Aa Iep The FLS technology is unique for its quick and simple setup via ergonomically positioned controls with a touch panel. The cutting width values can be set manually, by means of the basic 'Absolute' program, or using the optional 'Chain' and 'Optim' programs. The cutting path on the material is indicated by a laser beam and then longitudinally followed by the moving saw blade. The FLS saw can cut beams, squared timbers, planks, as well as large-format materials. The input material can be edgebanded, ripped, cut to size, mitered, grooved, or used to produce cut-to-length pieces and lamellas. It is particularly suitable for manufacturers of edge-glued panels, solid wood furniture, or staircases. The machine can also be used for processing non-wood materials, such as PUR/PIR panels, plastics, sandwich panels, aluminum or cement-bonded particle boards.