EDGEBANDER DUA SISI

IMA COMBIMA/II/590/B/R3

Kondisi: sangat baik (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edging material (thickness min/max) mm: 0.3 / 3 – Maximum edge thickness in laths/strips mm: 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control/software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 (Master & Slave) Safety and soundproof cabins Panel processing (for each side): - Pre-milling unit 75.186 (1 x 4.4 kW) - Multi-blade cutting unit (2 x 6.6 kW) Max. 35 m/min - Jointing cutter unit 75.186 (1 x 4.4 kW) Pedpfx Aoxggzlen Isra Edgebanding section (for each side): - Gluing unit (PUR glue + pre-melter) VTG 3-24 + 283.203 - Pressure zone + edge magazine for rolls (compartment no. 24) - End trimming unit 08.42 / 30 / B (2 x 0.66 kW) 30 m/min (0°-25°) - Pre-milling/milling unit 08.055 (2 x 1 kW) 0°-30° (30 m/min) - Multifunctional unit (radius milling + profile milling unit) MFA 08.342 (2 x 0.66 kW) SERVO Max. 20 m/min - OPTIONAL: KFA 30 - Profile scraping unit 08.519 - Flat scraping unit 08.521 - Spraying unit (for polishing fluid) - Buffing unit 08.604 (0.25 kW x 4) - 2 x standard milling units for grooving/rebating (1 left + 1 right) 08.190 (4.5 kW x 2) 90°/180°/270°

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 223.000 km, daya: 415,56 kW (565,00 hp), pendaftaran pertama: 06/2024, jenis bahan bakar: diesel, berat keseluruhan: 23.000 kg, konfigurasi gandar: 6x4, warna: biru, kabin pengemudi: kabin tidur, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, Perlengkapan: ABS, filter jelaga, hidrolik, kantung udara, kendali jelajah, komputer bawaan, kontrol traksi, kunci diferensial, pemanas parkir, pendingin udara, spoiler, Kenworth W900L New Model – Leather, Wood... Fully Loaded! – Jake Brake, Cummins Engine – 18-Speed Fuller Transmission – Rear Fenders included in price per customer specification – 6" Exhaust Pipes – LED Headlights – Refrigerator – Microwave – 70" Stand-Up Sleeper, 2 Beds – PTO (Power Take-Off) – Full Rear Axle Lockers, each axle lockable individually – The truck has too many extras to list. – For further questions, feel free to contact us by email or phone. – Price includes German registration papers (Fahrzeugbrief). – Subject to prior sale and errors. – Financing and trade-in possible, all offers welcome. – Tipping hydraulics available for an extra charge! – [web address removed] – ALL OUR TRUCKS ARE CLEARED THROUGH CUSTOMS AND TAXED IN GERMANY AND COME WITH AN EU REGISTRATION CERTIFICATE. WITH US, QUALITY IS NOT JUST A NAME. – Didn’t find your dream vehicle in Europe’s largest US truck inventory? Not your company or favorite color? No problem... we have over 500 more trucks available new and used in the USA and Canada, all makes. We also work with one of the best paint shops in Germany – let us advise you and provide a free quote. We look forward to your call. Please note: visits and inspections are only possible by appointment. Predswt Thzopfx An Ioa

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2013, Manufacturer: HSM Psdpfour Ravex An Isra Model: HL 4010 Li Year of manufacture: 2013 The equipment is incomplete and is being sold as parts. Defects: - Hydraulic pump missing - Control unit missing - Power supply missing

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Prjdpsi Hn Srofx An Ioa Edge thickness in rolls (min/max): 0.3 / 3 mm – in strips: max 1 mm Panel thickness (min/max): 14 / 60 mm (LASER – Max 50 mm) Control: ICOS Open Feed speed (adjustable): 6 – 30 m/min Upper pressure: V-belt driven Spraying unit (for liquid non-stick agent) Adjustable fence, CNC controlled Panel infeed system Joint milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR adhesive + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spraying unit (for separation liquid) Pressure zone + edge magazine for rolls (compartments): 36 + 12 End trimming unit 08.428 (0.2 kW x 2), speed up to 30 m/min (0° – 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1), 4 profiles Contour milling unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing agent) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (4.5 kW x 2), 90°/180°/270° (CNC)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, HOLZ-HER Accura 1558 Performance Edge Banding Machine with Belt Bridge and Intelligent Equipment Package for Edge Thicknesses up to 15mm. Effortless program changeover and tool adjustment via 18.5” full-colour touch screen (16:9). Short glue system heating time with GlueJet (GJ 301 automatic), approx. 2–3 minutes depending on adhesive type and ambient temperature. Always fresh adhesive thanks to the GlueJet application system and adhesive cartridges. PUR glue changeover and system cleaning is straightforward and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for film-protected materials, such as high-gloss and super-matt! One of the major highlights of this machine is the multifunction package, particularly advantageous for operations handling a wide variety of edge materials. The DIA tools are multi-stage and can switch between radii and chamfers as required – from the longitudinal milling unit to corner copying and up to the profile scraper blade. The extendable workpiece support and extended infeed area with air-cushion table facilitate processing of large workpieces. A guiding system assists with the infeed of small workpieces into the machine. Edge thickness (coil): 0.4 – 3 mm (material-dependent) Edge thickness (strips): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet for EVA and PUR grades, with minimal effort required. All common edge types processed, including high-gloss, super-matt, and solid wood edges up to 15 mm. Motorised infeed fence adjustment Narrow part guide system Prepared for connection to a RETURN system Motorised pressure bridge with upper belt feed Multifunctional units for fast changeover between radius, flush, and chamfer Spray units (vertical & horizontal) and much more. Delivery, installation, and operator training for the machine can be provided by us at an additional cost. Pedpfx Ajyfgrpjn Iera The machine is currently located in our dispatch warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTRE (POINT-TO-POINT) CNC machining centre for milling, drilling, cutting, and edge-banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel 650 mm) Maximum working area for edge-banding (mm): 4000 x 1600 x 100 No. 8 clamping table with consoles (number of consoles) - 1400 mm LED setup aid for positioning of vacuum suction cups (Y-axis) No. 2 vacuum pumps (capacity: 140 m³/h) Safety housing for the machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivelling 90° in X-Y direction), diameter 200 mm Edge-banding unit (PUR glue + premelter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE-BANDING UNIT No. 2 edge magazines for roll material Prsdpfxjw A Ruqo An Isa OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and contour scraping

Kondisi: bekas, Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 812 - 5547/V.01.87.110, berat keseluruhan: 19.190 kg, For sale is a well-maintained Nicholson debarking machine A 5 B for debarking diameters up to 56 cm. We operated the machine in our small-diameter sawmill (max. 25 cm diameter). It was running without any issues up to the last moment. Recently, the knife cylinders were replaced and are absolutely airtight. The rotor bearings are in perfect condition. This is a very powerful and fast machine. Nicholson debarkers are straightforward machines! - Minimum log length: 200 cm - Minimum diameter: 7.6 cm - Maximum diameter: 56 cm - Weight: 19,190 kg Pedpfxsw D Hy Sj An Isra - Machine dimensions: 470 x 251 x 335 cm (including rotor) - Feed speed up to 114 m/min possible (currently set to 95 m/min)

Kondisi: bekas, Tahun pembuatan: 1990, Sheet width 3050 mm Sheet thickness 12 mm Frame gap 3100 mm Table height above floor 900 mm Shear angle adjustment 0.5 - 3° Strokes per minute 6 - 13 spm Backgauge - adjustable 1000 mm Hold-downs 18 units Oil capacity 350 l Total power requirement 22.5 kW Machine weight approx. 8 t Machine dimensions (L x W x H) 3.96 x 2.10 x 2.22 m - incl. cutting clearance adjustment - Accessories: electric backgauge, spare blades Psdpfxsu Uu Smo An Isra

Kondisi: bekas, nomor mesin/kendaraan: 007960, 1 Prjdpfxswl Dnij An Isa

Kondisi: sangat baik (bekas), Generator ultrasonik bekas dengan jam operasi rendah Tersedia sonotrode, kabel, booster dan generator yang cocok di stok dan dapat dibeli terpisah Tersedia beberapa generator ultrasonik Beragam produsen dan merek Merek: Herrmann Merek: Weber Merek: SONIC Merek: COMPProve Tampilan: Layar digital dengan indikator LED untuk output daya (%) Prodewiw Ahspfx An Iea Output daya: Dapat diatur tanpa tingkat dari 0–100 % Kontrol: Sakelar on/off di panel depan Indikator status: Indikator LED multi-warna untuk status operasi Casing: Konstruksi industri yang kokoh dari logam