EDGEBANDER DUA SISI

IMA Combima II / 440 /A / R3

Kondisi: sangat baik (bekas), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINE – First (1st) machine in a line Lrsdpfxjunrwns Al Nsp Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge material (thickness, min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Protective and soundproof cabins FORMATTING UNIT (each side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING UNIT (each side): Gluing unit (hot-melt glue + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (slot no.): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°-30° Milling unit 08.055 (2 x 0.66 kW) 0°-30° Profile scraping unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving/rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°-180°

Tahun pembuatan: 2022, Kondisi: baru, La máquina ZIM T1200 puede fabricar tubos de 300 mm a 1200 mm de diámetro y de 500 mm a 2500 mm de altura mediante prensa simple, doble o triple. También es posible producir tubos de 150 mm y 200 mm por demanda especial. Las máquinas pueden ser diseñadas en versión semiautomática o totalmente automática según los requisitos del cliente. Utilizamos microprocesadores PLC de la marca SIEMENS en las máquinas automáticas. Las máquinas cuentan con tolva de mortero y sistemas de llenado de mortero integrados. Los materiales producidos pueden ser transportados a la zona de secado mediante carros de transporte o carretillas elevadoras (montacargas). La producción se realiza sobre palets de fabricación. Los materiales de hasta 800 mm de diámetro se transportan a la zona de secado mediante carros de transporte; los tubos de más de 800 mm de diámetro pueden trasladarse con carretilla elevadora. Para mayor rapidez en la producción, también es posible trasladar con carretilla elevadora los tubos de más de 300 mm de diámetro. La máquina realiza la producción mediante prensa hidráulica y vibración. El sistema de vibración de la máquina es un diseño especial de los ingenieros de ZIM. Este sistema de vibración cuenta con un sistema de refrigeración por aceite y una unidad de aceite especial. El control del sistema es electrónico. Lredoibbikepfx Al Nsp El chasis especialmente diseñado y robusto de la máquina garantiza una producción duradera y sin fallos.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, schliesskraft-und-parameter-1 Ledpfx Ajvl Skgol Nsrp

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Einwellenzerkleinerer von Weima Modell - WL6S Lrjdpeivpttefx Al Njp Hauptantriebsmotor - 22 kW

Tahun pembuatan: 2005, Kondisi: baik (bekas), nomor mesin/kendaraan: C9 15840, Profilbürstmaschine Tagliabue LB 2 Modell: LB 2 TECHNISCHE DATEN: Lodpfeg Rn Iaex Al Nerp Baujahr: 2005 Tagliabue Kanten-Schleifmaschine mit 4 oszillierenden Schleifaggregaten. Zwei vertikale Walzen und zwei innenliegende Querwalzen für das Querbürsten.

Kondisi: baik (bekas), Tahun pembuatan: 2007, X working area 4000 mm, Y 2000 mm, Z 115 mm Weight 16,000 kg Dimensions (L x W x H): approx. 9800 mm x 5300 mm x 2000 mm CNC Control: Siemens Sinumerik 840 D Laser Type: TruFlow 4000 W Max. sheet thickness: 20 mm Feed: 4000 mm x 1250 mm Traverse path: 3400 mm Dismantling, loading, and crane services are not included in the machine price – additional charges apply for all services. NC: 88631 - Resonator/HD Pump 1: 87603 - Beam ON / Pump 2: 53667 Technical Parameters: - Model: KNC/H 1500/65 - Maximum temperature: 650°C - Recommended operating temperature range: 300°C to 600°C - External dimensions (W x H x D): approx. 2800 x 3200 x 2100 mm * Height including door design with hydraulic opening - Internal dimensions (W x H x D): 1500 x 1000 x 1000 mm - Number of heating zones: 1 - Maximum batch weight: 1000 kg - Heating power: 48 kW - Furnace weight: approx. 1300 kg - Voltage: 3/PEN 400/230 V AC 50 Hz - The flap is part of the furnace, serves for automatic temperature control, and is operated via the controller program. - Including technical documentation in Slovak - Protocol for measurement and optimization of temperature uniformity according to DIN 17052-1 ΔT10°C in the internal working chamber (in empty furnace at Tmax) Lrsdpfx Aovtm Szjl Nop - Technical documentation is in Slovak. Manufacturer: LAC, s.r.o., Czech Republic Year of manufacture: 2021 This is an electric furnace, whose heating system consists of resistance heating elements located near the fan unit. The fan ensures the circulation of the atmosphere in the heating chamber via the heating branches, thus warming the working atmosphere and the load in the furnace. The furnace working chamber is equipped with a separately regulated heating unit in the rear wall. The furnace is fitted with a radial circulation fan with a horizontal shaft to ensure uniform temperature distribution throughout the entire work space. The circulation fan drives heated air through the circulation ducts in the recirculation insert. All rotating parts are protected against accidental contact. The temperature profile of the unit is controlled by a programmable PID industrial controller. This controller allows for the creation of up to 30 heat treatment programs, based on processing technology requirements and material batch specifications. Dimensions: see attachment.

Kondisi: baru, Tahun pembuatan: 2021, Model: i7 Working area: 3048*1524mm Machine overall dimensions: 4960×2280×2200mm Laser output power: 3000W / 2000W / 1500W X / Y-axis positioning accuracy: ±0.05mm X / Y-axis repositioning accuracy: ±0.03mm X / Y-axis max. linkage speed: 100m/min 1. Compact design with full protection The small footprint balances comprehensive protection with enhanced safety. 2. Active anti-collision function Effectively reduces laser head damage rates, helping you save on maintenance costs. 3. Cast iron bed Lredpfjg D Nypox Al Nop Featuring excellent shock absorption, the cast iron bed maintains its shape over time and ensures optimal mechanical properties. 4. Burr-free cutting of thin sheets The i series can cut the edges of thin sheets and reliably ensures burr-free results without vibration marks.

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, penyesuaian silinder hidrolik: 40 mm, tinggi pemasangan: 2.400 mm, lebar total: 17.000 mm, panjang meja: 400 mm, lebar meja: 400 mm, gaya penekanan: 25 t, penyesuaian langkah: 17 mm, lebar kerja: 200 mm, berat keseluruhan: 2.500 kg, tahun perombakan terakhir: 2023, daya: 0,003 kW (0,00 hp), Manufacturer: MABU Model: 25 VPR. Made in Germany. Completely overhauled in December 2023. Max. force: 250 kN (25 t). Speed range: 100–500 spm. Year of manufacture: 1998. Operating modes: Manual, single stroke, and automatic. Equipped with two-hand starter and foot pedal starter. Fixed stroke: 17 mm. Ram adjustment: 40 mm. Max. tool dimensions: 400 x 400 mm. Power: 3 kW. Voltage: 230 / 400 V. Air connection: 5.5 bar. Feed: Lrjdpjq Ikhpofx Al Njp Silicon SFS 200 on the left side. Max. strip width: 200 mm. Machine dimensions: H 2350 x W 1700 x D 1400 mm. Machine weight: approx. 2500 kg. Control cabinet with Mabu PF 1.3 control system. Front and rear safety guards with viewing windows. Technical documentation and operating manual in English and German included. CE certificate and EUR-1 certificate of origin. In stock, tested, and ready for dispatch. Further used machines from Mabu, Bruderer, Bihler, and Schaal available for sale from our inventory.

Kondisi: bekas, nomor mesin/kendaraan: 006290, Max. working width: 1300 mm Ledpfx Alju A Evho Norp Max. working height: 100 mm Number of rollers: 2

Kondisi: sangat baik (bekas), Tenoning and Mortising Machine WEINIG Type 51 - Tilting sash window setup with digital angle display - Roller table with automatic feed, 6 m/min - Roller table length approx. 2,100 mm - Pneumatic workpiece clamping - Automatic counter fence exchange Crosscut Saw - Pneumatically indexed 4-position revolver - Motor approx. 3 kW / 380 / 400 V / 50 Hz - Saw blade diameter = 350 mm - Saw blade speed 2,800 rpm Mortising Spindle - Diameter D = 50 mm - Clamping length 320 mm Lodpfov Tb Hgox Al Nerp - Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz - Spindle speed 3,000 rpm - Max. tool diameter 320 mm - Length stop system Machine incl. operation tools Installation dimensions L x W approx. = 2,700 x 2,800 mm Weight approx. 2,000 kg Used Machinery Notice: • Errors in technical details and prior sale excepted. • Stated prices are ex location – loaded free on truck! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)