Mesin edge bander dua sisi

IMA COMBIMA SYSTEMS/II

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, daya: 19 kW (25,83 hp), jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.730 mm, jumlah spindel: 20, Jumlah stasiun alat di turret alat 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction beam traverses: 8 Number of tool changer positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE mark Front safety cover The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Fpodoyttf Sepfx Aagod External reference: 6906

Kondisi: belum diuji (bekas), Tahun pembuatan: 2009, Fungsionalitas: belum diuji, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 700 mm, jumlah spindel: 40, TECHNICAL DETAILS Minimum panel length: 170 mm Maximum panel length: 2,500 mm Minimum panel width: 50 mm Maximum panel width: 700 mm Number of injectors: 2 Number of storage units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-axis: 6 Number of spindles for horizontal drilling in X-axis: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Motor power (vertical drilling): 3 kW Motor power (horizontal drilling): 2.2 kW Fsdpoyq Irhsfx Aagopd Note: Tools not included The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6106

Kondisi: belum diuji (bekas), Tahun pembuatan: 1999, Fungsionalitas: belum diuji, lebar kerja: 1.300 mm, tinggi kerja: 110 mm, DETAIL TEKNIS Lebar kerja maks.: 1.300 mm Tinggi kerja maks.: 110 mm Tinggi kerja min.: 8 mm PERLENGKAPAN Rol pengumpan bermotor 2 unit sikat Mesin dijual dan dikirim dalam kondisi aktual dan hukum (“apa adanya dan sesuai kondisi saat dilihat dan disetujui”) berdasarkan dokumentasi foto serta dokumen teknis/komersial dengan karakter deskriptif. Pembeli berhak untuk memeriksa barang sebelum pengambilan dan bertanggung jawab atas instalasi, pengamanan, dan penggunaan mesin di lokasi tujuan. Fodpfsyqynuox Aagopd Referensi eksternal: 7615

Kondisi: belum diuji (bekas), Tahun pembuatan: 2012, jam operasional: 9.910 h, Fungsionalitas: belum diuji, tinggi kerja: 45 mm, panjang kerja: 2.600 mm, RINCIAN TEKNIS Panjang kerja maks.: 2.600 mm Tinggi kerja maks.: 45 mm RINCIAN MESIN Daya total terpasang: 6,5 kW Fpedpfsyq Ez Hjx Aagjd Jam operasi: 9.910 jam Mesin dijual dan dikirim dalam kondisi nyata dan hukum sebagaimana adanya ('sebagaimana dilihat dan disetujui') berdasarkan dokumentasi foto serta dokumen teknis/komersial yang bersifat deskriptif. Pembeli memiliki hak untuk memeriksa barang sebelum pengambilan, dan bertanggung jawab atas instalasi, pengamanan, dan penggunaan mesin di lokasi tujuan. Referensi eksternal: 6063

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 4.175 mm, jarak lintasan sumbu Y: 1.550 mm, tinggi benda kerja (maks.): 40 mm, jumlah spindel: 30, kecepatan perjalanan (maks.): 80.000 mm/menit, TECHNICAL DETAILS Fsdpeyttcwefx Aagepd Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 80 m/min Traverse speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of traverse beams with suction: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of places: 18 Tool magazine 2 Number of places: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, safety, and use of the machine at the destination. External reference: 7350

Kondisi: belum diuji (bekas), Tahun pembuatan: 2009, Fungsionalitas: belum diuji, jumlah sumbu: 4, panjang meja: 4.300 mm, lebar meja: 2.200 mm, jumlah spindel: 40, diameter alat: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X direction: 6 Number of spindles for horizontal drilling in Y direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Number of positions in tool magazine 1: 22 Fedpfx Aeyq Ez Toagspd Number of positions in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT Automatic panel loading system Automatic panel stacking system Lifting table Transport system Vacuum pump Note: The safety fences at the rear and at the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection, and assumes responsibility for installation, securing, and use of the machine at the final destination. External reference: 7087

Kondisi: belum diuji (bekas), Tahun pembuatan: 2014, Fungsionalitas: belum diuji, daya: 25 kW (33,99 hp), tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 12 mm, kecepatan pemakanan sumbu X: 18 m/menit, Perlengkapan: Penandaan CE, TECHNICAL DETAILS Panel Height min.: 8 mm Panel Height max.: 60 mm Edge Thickness min.: 0.3 mm Edge Thickness max.: 12 mm Max. Feed Speed: 18 m/min Sequence of Processing Steps: Section 1 Operation: Positioning Motor Power: 2.5 kW Automatic Control Edge Preheater Glue Tank Pre-glue Heater Roll Magazine Section 2 Operation: Trimming Number of Motors: 2 Section 3 Operation: Edge Milling Number of Motors: 2 Motor Power: 0.55 kW NC Positioning Section 4 Operation: Corner Rounding Number of Motors: 2 NC Positioning Section 5 Operation: Milling Number of Motors: 1 Motor Power: 3.5 kW Section 6 Operation: Edge Scraping Section 7 Operation: Glue Scraping Fpedpfxsytr Rgs Aagjd Section 8 Operation: Brushing Number of Motors: 2 MACHINE DETAILS Total Power: 25 kW EQUIPMENT Panel Support Guide Spraying Unit Control with more than 20 control systems CE Marking The machine is sold and delivered in its actual technical and legal condition (“as seen and inspected”), based on photo documentation and technical/commercial documentation of descriptive character. The buyer has the right to inspect the goods before collection, and assumes responsibility for installation, securing, and use of the machine at the destination. External Reference: 6216

Kondisi: belum diuji (bekas), Tahun pembuatan: 2007, Fungsionalitas: belum diuji, ketinggian potong (maks.): 110 mm, panjang benda kerja (maks.): 2.200 mm, lebar benda kerja (maks.): 4.300 mm, Perlengkapan: Penandaan CE, 1 Fpsdpfx Ajyqydcoagjd

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, panjang total: 6.600 mm, tinggi total: 2.550 mm, lebar total: 2.150 mm, daya: 48 kW (65,26 hp), RINCIAN TEKNIS Fsdpfjyq Iziox Aagopd Panjang area pengisian: 2.900 mm Lebar area pengisian: 1.400 mm RINCIAN MESIN Dimensi Panjang total: 6.600 mm Lebar total: 2.150 mm Tinggi total: 2.550 mm Daya motor poros pemotong: 37 kW Total daya terinstal: 48 kW Mesin dijual dan dikirim dalam kondisi fisik dan hukum sebagaimana adanya ("seperti dilihat dan disetujui") berdasarkan dokumentasi foto dan dokumen teknis/komersial yang bersifat deskriptif. Pembeli berhak untuk memeriksa barang sebelum pengambilan dan bertanggung jawab atas pemasangan, pengamanan, dan penggunaan mesin di lokasi tujuan. Referensi eksternal: 8012

Kondisi: belum diuji (bekas), Tahun pembuatan: 2010, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 120 mm, lebar benda kerja (maks.): 230 mm, model controller: Siemens Simatic Panel Touch, panjang benda kerja (maks.): 8.483 mm, TECHNICAL DETAILS Minimum processing height: 6 mm Maximum processing height: 120 mm Minimum processing length: 370 mm Maximum processing length: 8,483 mm Minimum processing width: 25 mm Maximum processing width: 230 mm Maximum feed speed: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control unit: Siemens Simatic Panel Touch Unit 1 Motor power: 4 kW Shaft diameter: 40 mm Shaft length: 240 mm Unit 2 Motor power: 4 kW Shaft diameter: 40 mm Shaft length: 240 mm Max. tool diameter: 4 mm Unit 3 Motor power: 4 kW Shaft diameter: 40 mm Shaft length: 240 mm Unit 4 Fedpfxjyqx T Aj Aagjpd Motor power: 5.5 kW Shaft diameter: 40 mm Shaft length: 240 mm Automatic chip removal power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, model controller: POWERCONTROL, panjang benda kerja (maks.): 4.300 mm, lebar benda kerja (maks.): 2.200 mm, kecepatan pemakanan sumbu X: 80 m/menit, 1 Fedpfxeyttqze Aagopd

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, diameter utama gergaji: 315 mm, diameter alat: 315 mm, Perlengkapan: Penandaan CE, doser, DETAIL TEKNIS Diameter mata gergaji utama: 315 mm Diameter alat maksimum: 315 mm DETAIL MESIN Unit mata gergaji bundar: 1 Daya terpasang: 4 kW PERLENGKAPAN Skor Fpodpfx Ajyqyc Eeaged Kemiringan Sertifikasi CE Mesin dijual dan dikirim dalam kondisi sebenarnya dan hukum ("sebagaimana dilihat dan disetujui") berdasarkan dokumentasi foto dan dokumen teknis/komersial yang bersifat deskriptif. Pembeli memiliki hak untuk memeriksa barang sebelum pengambilan, serta bertanggung jawab atas pemasangan, pengamanan, dan penggunaan mesin di lokasi tujuan. Referensi eksternal: 8118

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, diameter silinder: 85 mm, lebar kerja: 1.400 mm, jumlah silinder: 10, panjang kerja: 4.000 mm, RINCIAN TEKNIS Panjang kerja maks.: 4.000 mm Lebar kerja maks.: 1.400 mm Jumlah silinder tekan: 10 Diameter silinder: 85 mm RINCIAN MESIN Sistem pemanas: Minyak PERLENGKAPAN Fpodoyqybhspfx Aagjd Sistem dengan konveyor pengumpan Sistem dengan meja keluaran Standar keselamatan CE-Mark Mesin dijual dan dikirim dalam kondisi nyata dan hukum sebagaimana adanya ("apa adanya, sesuai foto dan dokumen teknis/komersial yang bersifat deskriptif"). Pembeli berhak untuk memeriksa barang sebelum pengambilan dan bertanggung jawab atas instalasi, pengamanan, dan penggunaan mesin di lokasi tujuan. Referensi eksternal: 8212

Kondisi: belum diuji (bekas), Tahun pembuatan: 2011, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 6.200 mm, jarak lintasan sumbu Y: 1.935 mm, tinggi benda kerja (maks.): 250 mm, jumlah sumbu: 4, jumlah spindel: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X direction: 4 Number of horizontal drilling spindles in Y direction: 8 Total number of drilling spindles: 40 Total number of tool changer positions: 22 Number of vacuum beam traverses: 10 Milling unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Gluing unit Tool magazine Grooving unit Number of places in tool magazine: 22 Fsdjyqzrnspfx Aagepd MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety net Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 8011

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 40 mm, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 35 m/menit, kecepatan rotasi (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Fpedpfx Aoyqybujagsd Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spray device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application via rubber belt Panel guides with NC positioning Glue tank for EVA hot-melt adhesive Premelting device for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on protective devices CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at its destination. External reference: 5321

Tahun pembuatan: 2006, Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, lebar kerja: 1.200 mm, tinggi kerja: 1.600 mm, panjang kerja: 1.200 mm, Perlengkapan: Penandaan CE, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Lebar kerja maks.: 1.200 mm Panjang kerja maks.: 1.200 mm Tinggi kerja maks.: 1.600 mm DETAIL MESIN Daya total: 1,5 kW PERLENGKAPAN Penandaan CE, standar keselamatan Mesin dijual dan dikirim dalam kondisi aktual dan hukum ('sebagaimana adanya dan disetujui'), berdasarkan dokumentasi foto serta dokumen teknis/komersial yang bersifat deskriptif. Pembeli berhak untuk memeriksa barang sebelum pengambilan, dan bertanggung jawab atas instalasi, pengamanan, serta penggunaan mesin di lokasi tujuan. Fpodjyqx Ugopfx Aagjd Referensi eksternal: 6724

Kondisi: belum diuji (bekas), Tahun pembuatan: 2007, Fungsionalitas: belum diuji, lebar kerja: 1.935 mm, jumlah spindel: 40, tinggi pelat: 350 mm, panjang kerja: 6.200 mm, jumlah sumbu: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge banding magazines: 3 Fpodpfxoyqx U He Aaged Number of tools in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum cups for securing workpieces Safety mats at the front Vacuum pump Waste chip conveyor Fixed grooving unit for creating grooves in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at its destination. External reference: 8105

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, Tahun pembuatan: 2008, model controller: HMI PLC KAESER, tekanan (maks.): 8,5 batang, kecepatan rotasi (maks.): 2.965 rpm, RINCIAN TEKNIS Kecepatan motor: 2.965 rpm Tekanan kerja maksimum: 8,5 bar Pengering udara Model: ABT 102 Tekanan kerja maks.: 21 bar RINCIAN MESIN Model sistem kontrol: HMI PLC KAESER Daya motor: 55 kW Tegangan: 400/460 V Mesin dijual dan dikirim dalam kondisi fisik dan hukum sebagaimana adanya (“apa adanya”) berdasarkan dokumentasi foto dan dokumen teknis/komersial yang bersifat deskriptif. Pembeli berhak untuk memeriksa barang sebelum pengambilan dan bertanggung jawab atas instalasi, pengamanan, dan penggunaan mesin di tempat tujuan. Referensi eksternal: 7549 Fpodsyq Hi Espfx Aaged

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, panjang pelat: 2.800 mm, lebar pelat: 1.300 mm, DETAIL TEKNIS Lebar pelat maks.: 1.300 mm Panjang pelat maks.: 2.800 mm PERLENGKAPAN Sistem pembalik pelat 180 derajat Fedpfeyq E S Sjx Aagjpd Mesin dijual dan dikirim dalam kondisi sebenarnya secara fisik dan hukum (“apa adanya, seperti dilihat dan disetujui”) berdasarkan dokumentasi foto serta dokumen teknis/komersial yang bersifat deskriptif. Pembeli berhak memeriksa barang sebelum pengambilan dan bertanggung jawab atas instalasi, pengamanan, dan penggunaan mesin di lokasi tujuan. Referensi eksternal: 6327

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, daya: 55 kW (74,78 hp), Tahun pembuatan: 2010, kecepatan rotasi (maks.): 2.965 rpm, RINCIAN TEKNIS Kecepatan motor: 2.965 rpm Fpjdpfxjyttk Ij Aagsd Tekanan kerja maksimum: 8,5 bar Pengering udara Model: ABT 102 Pengering Udara Tekan Tekanan kerja maks.: 21 bar RINCIAN MESIN Model kontrol: HMI PLC KAESER Daya motor: 55 kW Tegangan operasi: 400/460 V Mesin dijual dan dikirim dalam kondisi aktual dan hukum (‘sebagaimana dilihat dan disetujui’) berdasarkan dokumentasi foto serta dokumen teknis/komersial yang bersifat deskriptif. Pembeli memiliki hak untuk memeriksa barang sebelum pengambilan dan bertanggung jawab atas instalasi, pengamanan, dan penggunaan mesin di lokasi tujuan. Referensi eksternal: 7548