Mesin pelapis tepi

IMA NOVIMAT/CONTOUR/I/G80/700/L20+

Kondisi: belum diuji (bekas), Tahun pembuatan: 2016, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 22 mm, kecepatan rotasi (maks.): 12.000 rpm, Perlengkapan: Penandaan CE, The machine has the following configuration: Pre-milling unit Automatic, time-controlled intervention and positioning via NC Lamps for preheating the panel edge Dedpfx Aoyxndbshujkk Edge tape magazine Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Finishing and corner rounding unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, time-controlled intervention Cut-off saw RB02 Positioning via NC Glue scraper unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber belt Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 7673

Kondisi: belum diuji (bekas), Tahun pembuatan: 2006, Fungsionalitas: belum diuji, kecepatan rotasi (maks.): 2.970 rpm, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 1.000 mm, Perlengkapan: Penandaan CE, TECHNICAL DETAILS Maximum panel width: 1,000 mm Maximum panel length: 2,500 mm Minimum panel length: 250 mm Minimum panel width: 100 mm Number of vertical lower units: 5 Number of vertical upper units: 1 Lateral horizontal units: yes Number of pressing elements: 5 Number of lateral horizontal units: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS Dkodpfx Aheyzy T Teusk Control system: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal units CNC positioning of the units CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the designated location. External reference: 6157

Tahun pembuatan: 2007, Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, panjang total: 5.700 mm, lebar total: 1.000 mm, panjang benda kerja (maks.): 2.000 mm, lebar benda kerja (maks.): 800 mm, Perlengkapan: Penandaan CE, 1 Dkedpfx Aheyzzhxeusk

Kondisi: belum diuji (bekas), Tahun pembuatan: 2006, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 4.400 mm, jarak lintasan sumbu Y: 1.300 mm, kecepatan pemakanan sumbu X: 40 m/menit, laju pemakanan gandar Y: 45 m/menit, Perlengkapan: Penandaan CE, The machine has the following configuration: Drilling units: Upper group with 30 vertical and 6 horizontal spindles Milling unit 1: Upper group, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling unit 2: Upper group, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, located at the rear of the machine Tool magazine 2: 6 positions, mounted on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm Travel speed X-axis: 40 m/min Travel speed Y-axis: 45 m/min Travel speed Z-axis: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Dsdpfxjyzy S Nj Ahujkk Machine programming software: XILOG Single vacuum pump capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Work table with suction bars Number of suction bars: 8 Vacuum clamping for the workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8340

Kondisi: belum diuji (bekas), Tahun pembuatan: 2012, Fungsionalitas: belum diuji, lebar pemotongan (maks.): 4.500 mm, kecepatan pemakanan sumbu X: 140 m/menit, panjang bagian (maks.): 2.200 mm, Perlengkapan: Penandaan CE, doser, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum tool diameter (saw unit): 380 mm Maximum tool diameter (pre-scoring unit): 200 mm Saw blade projection: 95 mm Number of longitudinal saw grippers: 5 Number of cross-cut saw grippers: 8+4 Maximum feed speed: 140 m/min Dkodpeyxn Adefx Ahuek Saw unit 1 connected load: 15 kW Saw unit 2 connected load: 15 kW Pre-scoring unit 1 connected load: 2.2 kW Pre-scoring unit 2 connected load: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible pusher system Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5711

Kondisi: sangat baik (bekas), de-hu-01 Dkodpfxoyxl Sio Ahuok

Kondisi: sangat baik (bekas), de-hu-01 Dkodpfxeyk Tkve Ahuok