Mesin multi-spindel

Index C200

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, daya motor spindle: 22.000 W, tinggi total: 2.050 mm, berat keseluruhan: 4.000 kg, produsen pengendali: INDEX, model controller: C200-4 / C200-8, This 5-axis turning and milling centre, Index G200 C, was manufactured in 2000. Take advantage of the opportunity to acquire this Index G200 C turning and milling centre. Contact us for further information. Additional Equipment • Synchronisation device for sub-spindle machining • Tool carrier 3 for sub-spindle (backside machining) • Additional milling spindle • Thread milling and polygon turning device • Tool changer without gripper (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • With C-axis • No driven tools Machine Advantages Technical Advantages • Footprint (without bar feeder): 3580 x 3108 mm • Control unit: Resolution: 0.001 mm (input/output/correction) • Extensive travel with multi-axis configuration • High precision with 0.001 mm resolution in numerical control • Versatile expansion steps and supplementary equipment for enhanced functionality Additional Information Rjdpfxoyailzs Ahvsn Motion Cross Slide 1 (top) - XYZB axes: X-axis: Travel 155 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Y-axis: Travel 120 mm, Feed force 10000 N, Rapid traverse 7.5 m/min, Resolution 0.0005 mm Z-axis: Travel 590 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm B-axis (rotating): 360° swivel range, angle increment 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross Slide 2 (bottom) - XZ axes: X-axis: Travel 105 mm, Feed force 5000 N, Rapid traverse 20 m/min, Resolution 0.0005 mm Z-axis: Travel 307 mm, Feed force 5000 N, Rapid traverse 30 m/min, Resolution 0.001 mm Turret right: X-axis: Travel 120 mm Z-axis: Travel 400 mm Tailstock centre distance: 400 mm Max. thrust: 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Flow rate: 18 l/min System pressure: 90 bar Filling capacity: 70 litres Coolant system: Pump output (switchable): 20 l/min @ 18 bar / 50 l/min @ 3 bar / 60 l/min @ 5-7 bar Filling capacity: approx. 230 litres Chip conveyor: Hinged belt or scraper conveyor Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Sub-spindle: D140 external mount (only pull tension allowed for collet and chuck clamping) 1: Spindle bore (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle diameter at front bearing: 75 mm (30 mm bore) / 85 mm (42 mm) / 100 mm (60 and 65 mm) Max. speed: 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Bar diameter (workpiece-Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine depth 3580 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 850 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 610 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 725 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 260 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 610 mm, torsi: 250 Nm, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE including ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (pre-loaded roller guideways) with Y-axis - On main/counter spindle - State-of-the-art SINUMERIK ONE control with ShopTurn dialog programming Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Counter spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 turret, radial, with directional logic for up to 12 driven tooling stations - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: - Travel: +/-40 mm - Hollow clamping cylinder incl. draw tube - C-axis for main/counter spindle Control: - Sinumerik ONE / OPERATE - 22" multi-touch screen - SHOPTURN - 3D simulation - Remnant material detection - USB interface - Electrical cabinet A/C unit Cooling: - Coolant system incl. coolant pump (3.5 bar) - Chuck flushing (additional pump 3.5 bar) - Part ejector and flushing via counter spindle Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate Rodpfx Aox E Dncohvjn Control languages: - German/English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: This cycle allows the use of the counter spindle with a mounted live center to support workpieces. Thus, shaft parts can be supported and machined using the counter spindle even on machines without a tailstock. The max. tailstock force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals are two-channel/potential-free. Digitalization package for Sinumerik: - Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems - Standard signals include: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95 and 105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D data model of the machine included Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts are transported to a catch box (standard) or onto a conveyor belt (option). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For integration of EMCO SL1200 short bar loader. ...etc. Machine is immediately available!

Kondisi: bekas, Tahun pembuatan: 2014, INDEX C200 CNC Lathe 3 Turret 2 Spindle Kontrol Fanuc: 31i-Model B Pemegang Motoris Aksial: 6 pcs Pemegang Motoris Radial: 13 pcs Pemegang Alat: 11 pcs Pemegang Boring Bar: 21 pcs Pin: 1 pcs Bushing & Sleeves Loader: Ø51/Ø46/Ø41 Bushing loader MBL baru: 2 set 2 skala optik direkondisi oleh HEIDENHAIN Redpfxexxm Hfo Ahvsn 1 Box Lengan Portal soket Balluff dengan berbagai sensor, saklar induksi, dan kabel Belt motoris: 6 pcs Set bushing anti-vibrasi untuk loader MBL Waktu operasi: On time: 37.946 Jam hidraulik: 37.500 Waktu produksi: 26.500 Dengan MBL Bar Feeder

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Swing diameter: 200 mm, Turning length: 400 mm, Max. turning diameter: 420 mm, Bar capacity: 60 mm, Max. chuck diameter: 160 mm, Spindle speed: 5,000 rpm, Turrets: 2, Stations: 2x14, Rapid traverse X/Z: 20 m/min / 30 m/min. Machine dimensions X/Y/Z: approx. 7,500 mm / 2,100 mm / 2,100 mm, Weight: approx. 4,500 kg. Documentation available. On-site inspection possible. Rsdju T Rgkopfx Ahvjn

Kondisi: baru, - Semi-automatic - Hydraulic - Infinitely variable bandsaw speed - Double mitre - Hydraulic clamping of mitre adjustment - Saw feed pressure adjustable hydraulically - Fully hydraulic material clamping - Hydraulically adjustable clamping pressure - Cooling - Automatic shut-off - Automatic machine shut-down in case of: open cover, broken blade, insufficient blade tension - Emergency stop - Documentation Redpfovkkl Tjx Ahven - 400V

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 550 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 36 m/menit, produsen pengendali: Siemens, model controller: 828D + Shopmill, tinggi total: 2.560 mm, panjang total: 2.350 mm, lebar total: 2.160 mm, lebar meja: 550 mm, panjang meja: 1.000 mm, beban meja: 800 kg, berat keseluruhan: 4.300 kg, kecepatan spindel (min.): 100 rpm, kecepatan spindel (maks.): 10.000 rpm, pasokan pendingin: 20 batang, jarak dari tengah meja ke hidung spindel: 700 mm, hidung spindel: SK 40, jumlah slot dalam magazin alat: 30, panjang alat: 300 mm, diameter alat: 76 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Termasuk perlengkapan antara lain: Persiapan untuk sumbu ke-4 & ke-5 Panduan rol yang kokoh pada semua sumbu Sistem pendingin spindle (pendingin oli) Penukar alat lengan ganda cepat dengan pra-pemilihan dan majalah vertikal dengan 30 slot alat Konveyor serpihan tipe rantai Cairan pendingin melalui spindle dengan pompa tekanan tinggi 20 bar Udara tiup melalui spindle Pistol cairan pendingin Handwheel elektronik bergerak Atas permintaan, kami dapat menawarkan mesin ini beserta meja putar yang sesuai untuk sumbu ke-4 & ke-5. Mohon informasikan permintaan ini pada inquiry Anda! Redpfx Ahodkh Tievsn

Kondisi: baru, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Item number: SH230-1NCHS Motor power: 2.2 kW Vice opening: 235 mm Blade dimensions: 2950x27x0.9 mm Weight: 1,000 kg Speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic band saw with semi-automatic and fully automatic modes. Max. remnant piece length: 70 mm. Bundle cutting up to 230 x 230 mm. CNC band saw equipped with the new MEP 50 Windows-based control system. Material feed via stepper motor over ball screw spindle, mounted on opposing ball bearings. Single stroke of 500 mm, repeatable for any cutting length. Rjdpfx Ahschhfuovsn Easy programming: just enter cut length and quantity, then press "START". Electronic blade tension control. Automatic cutting force monitoring via a servo valve located directly on the cylinder. Band rotation control with instant stop in case of band blockage.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 21.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S4E184001, diameter putar di atas sled silang: 430 mm, panjang pembubutan: 670 mm, diameter pembubutan: 220 mm, lubang spindel: 45 mm, kecepatan spindel (maks.): 6.300 rpm, berat keseluruhan: 4.300 kg, Mesin bubut CNC hard turning bekas dengan spindle tambahan Merek: EMCO Tipe: Emcoturn 45E Tahun pembuatan: 2018 Jam operasi rendah Kontrol: Siemens 828D Rodsw Rrvwopfx Ahvsn Jumlah alat: 12 unit berpengerak Kecepatan maks.: 0-6000 rpm

Tahun pembuatan: 2013, Kondisi: baru, Various Thread Rolling Tools Manufacturer: Fette See list below All tools are new! M12-14x1.5 2/57 1K 1509925 1 M12-14x1.75 2/53 1K 1509970 2 7/16-20UNF T18-63-21.5 1538172 7 M20x1.5 T18-226-14A 1539858 8 M16x1.5 T18-33-21.5 1537459 6 M20x1 T18-158-21.5 1555189 6 11/16-14 UNS T27-687-31 2178650 6 M8-10x1.25 2/518 0.6K 1509550 2 M8-10x1 2/05 2K 509541 2 M8-10x1.5 2/772 0.3K 1 M8x1.25 T18-0.3-21.5 1536370 15 3/4-16 UNF T27-88-22A 2182703 2 M22x1.5 T27-39-14A 1544067 1 1/2x20 UNF T27-909-10A 2406829 3 3/4/16 UNF T18-67-16A 1538332 4 M12x1.5 T18-30-21.5 1536959 4 7/8-14 UNF T27-89-20A 3 M12x1.25 ISO T27vB 31mm 291 5 M8x1.25 T18-03-08A 2175185 7 M8x1.25 T18-03-10A 1536316 1 Redpfebv Tg Hjx Ahven M8x1 T18-17-21.5 1539787 1 11/16-14UNS T27-687-31 2178979 1 M25x1.5 T27-41-22A 2 M16-18x1 34/363 3K 1517783 4 M24x1 LH T27-29L-31 2179796 3 M24x1 ISO T27 31mm 3 M20x0.5 T18-228-16A 2177355 1 M12x1.25 T18-28-21.5 1536888 2 3/8-24 UNF T18-62-21.5 1538154 2 3/4-16 UNF T18-67-16A 1538332 2 10-32 UNF T18-286-12A 1538056 1 M12x1.5 T18-30-21.5 1536959 1 M18x0.75 T18-186-08A 1537547 3 M8x1 1223/05 1K 1508533 2 M11x0.75 T12-22-12A 2 M12x1 T12-27-15.5 531918 10 M7x0.75 T18-12-21.5 2179611 3 M7x1.0 1 M17.5x0.5 ISO T27vB 31mm 275 1 M16x1 T18-24-20A 1537379 1 M10-12x1.5 2/515 0.6K 1 M16x1 T18-24-21.5 1537388 2 M7x1.0 ISO T18 16mm FormA 5 1/2-20 UNF T27-85-16A 1545761 1 M12x1 T27 1 M18x1.5 T18-35-21.5 1537627 3 13/16x16 2 1/8-28 GAS T18 21mm 80 4 M12x1.25 T18-28-18A 1536879 4 M20x1.5 T27-38-10A 1543914 4 M20x1.5 T27-38-31 1 M30x1 T27-287-24A 2 M6x1 T18-01-18A 1539769 4 M6x1 T18-01-16A 2174668 8 M6x1 T18-01-10A 1536129 2 M6x1 T18-01-21.5 1 1/2-20 UNF C16-180-A10 2406916 3 M20x1 T27-27-31 2174791 5 M20x1 T27-27-31 2179011 2 M16x1 T27-24-13A 1 M10x1 T27-19-12A 2 M18x1.5 T27-37-26A 1556124 2 M10x1 T27-19-28A 1 M20x1.5 T27-38-14A 1543932 3 M20x1.5 T27-38-16A 1543950 1 M12x1.5 T27-32-18A 1543308 3 M18x1 T27-26-14A 2 M12x1.25 T27 3 M16x1.5 T27-35-12A 1543674 4 M12x1.25 T27-191-20A 1543255 3 M16x1.5 T27 31mm 2 M16x1.5 T27 12mm 2 M5x0.8 T18-82-14A 1 M5x0.8 T18-82-21.5 1 M10x0.5 T18 10mm 6 M20x1 T27-27-10A 1 M28x1.5 T27-100-31 2174706 3 M38x1.5 T27 31mm 2 M24x1.5 T27 31mm 5 M12x1 T27 31mm 1 M20x1.5 T27-38-31 1544021 2 M13x1 T27-250-20A 1 M12x1 2 M36x1.5 T27 31mm 3 M10x1 T27-19-28A 1543095 2 M10x1 T27-19-28A 1543102 1 ...

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Siemens control Rsdewh U Edjpfx Ahvon Bar capacity 32 mm 2 x 12-station turrets with driven tools Main / counter spindle Y-axis on upper turret Parts catcher Chip conveyor IRCO bar feeder magazine