Pusat pembubutan/penggilingan

INDEX R 200

Kondisi: bekas, EN-001 Iodpjvxmy Nefx Aahjik

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ Iiedpfx Ast Hagnjahjk * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, jumlah spindel: 2, produsen pengendali: Siemens, model controller: 840D Solution-Line, Comprehensively equipped turning and milling center with main and counter spindle! TECHNICAL DETAILS Spindles Main spindle: D65 Counter spindle: D65 Tool Carriers Tool carrier 1: Motorized milling spindle, tool system HSK A40 2 × 3 fixed tool stations: VDI25 on WT1 XYB Tool carrier 2: Motorized milling spindle, tool system HSK A40 2 × 3 fixed tool stations: VDI25 on WT2 XYB Cooling Systems Interface: Cooling water for machine cooling Cooling unit: Spindle and electrical cabinet cooling Coolant through main spindle: available Coolant through counter spindle: available 8 bar coolant pump: on cleaning system Medium/high-pressure pump 20 bar: on cleaning system High-pressure pump emulsion: 16 l/min High-pressure pump oil: 33 l/min, max. 80 bar Fine coolant filtration: Compact band filter type KF150 Filter fleece type: PN 100/100-540 Clean water tank: 1,500 × 1,010 × 600 mm (approx. 900 l capacity) Iisdpswylz Tsfx Aahjk 5-axis machine equipment: available Control: Siemens 840D Solution-Line EQUIPMENT Tool changer Electronic shaft for spindles and drive units Main spindle expansion stages Stop device incl. coolant through MSP with solenoid valve Counter spindle expansion stages Stop device incl. coolant through CSP with solenoid valve Accuracy package Portal take-off device Finished parts conveyor belt 1,250 mm hinged belt chip conveyor with lift pump Chip discharge right side Coolant supply and fine filtration INDEX LMS 3,200 SBL bar loading magazine Boring direction for SBL Various tool holders (static and driven) Various sleeves for the bar loading magazine

Kondisi: bekas, Technical Details: Table diameter: 4,500 mm Faceplate diameter: 4,500 mm Operating hours: 0 h Swing diameter: 5,000 mm Turning diameter: 5,000 mm Workpiece height (max.): 2,500 mm Control system: Sinumerik 840D SL X-axis stroke/ram slide: 300 mm X-axis stroke/ram travel: 2,850 mm X-axis working travel without tool: 2,850 mm X-axis working travel with tool changer: 5,000 mm W-axis (crossrail elevation travel): 1,800 mm Tool station/positions: 12 Tool holder interface: HSK 100 (spindle) Workpiece weight capacity: 100 t Table speed: 1 - 50 rpm T-slots: 8 units (36 H12) Ram milling speed: 4,000 rpm Rapid traverse in X and Z axes: 8,000 mm/min Torque for milling: 100,000 Nm Torque for turning: 200,000 Nm Total power requirement: 80 (2x40) kW Approximate machine weight: 140 t Approximate machine dimensions (LxWxH): 11.5 x 6.6 x 8.4 m CNC vertical turning lathe – NEW (The machine pictured is a demonstration model) Application of manufacturing processes: Turning processes, such as external longitudinal turning, internal and external face turning, and profile machining. Grooving operations both internal and external. Drilling, including short-hole and deep-hole drilling. Milling operations, such as face, corner, profile, and T-slot milling. Thread cutting. Also suitable for roughing and end machining. The machine bed, engineered as a welded construction, absorbs extreme cutting forces. The table is made from high-strength Meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. In addition, the table is equipped with hydrodynamic workpiece support. Additional features: Ijdpsu Ix H Defx Aahjik - Automatic tool changer - Chuck with 8 jaws, power-actuated spindle, and hardened jaws - Including 40 bar coolant system with filtration unit - Hydraulic and lubrication systems by ATOS and Dropsa - Equipped with Heidenhain axis measuring system - Renishaw - NEW – with warranty & service via WMW AG

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 1.150 mm, berat keseluruhan: 12.000 kg, diameter bor: 32 mm, Heidenhain iTNC530 CNC control system 12-position tool changer Technical data / details: Travels: X-axis (table, longitudinal): 1800 mm Z-axis (column, cross): 1700 mm W-axis (drilling unit, cross): 1150 mm Y-axis (drilling unit, vertical): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25 to +15° Iisdswcldaspfx Aahjk Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Machine weight approx.: 12,000 kg Technical data, accessories, and machine description are non-binding. For further technical details, see photos.

Kondisi: baik (bekas), Data teknis: Mesin press briket dalam kondisi baik Tahun pembuatan: 2007 Uji teknis pada 06 / 2025 Briket silinder 80 mm Kapasitas hingga maksimal 150 kg/jam *hanya sekitar 3.949 jam operasi - Mesin press hidrolik: mesin briket dengan jalur keluar - Unit hidrolik: 4 kW - Tekanan: maks 300 bar - Dimensi transportasi: 1585/2140/H1940 mm - Berat: 1.370 kg Jaminan fungsi saat penyerahan Iodpfx Aowtdk Tjahjik Silakan menghubungi kami untuk uji coba gratis!

Kondisi: sangat baik (bekas), 1 Iodoxauacspfx Aahjik

Kondisi: baik (bekas), Tahun pembuatan: 2012, CNC Swiss-type automatic lathe Manufacturer: CITIZEN Model: A32 VII CL Year of manufacture: 2012 Equipped with: Mitsubishi Meldas control Synchronous spindle Iedpfx Aaswntc Usheik Driven tools Backworking capability High-pressure coolant pump Oil mist extraction unit Fire extinguishing system Bar feeder: IEMCA BOSS

Kondisi: bekas, Tahun pembuatan: 2008, Putaran di atas penampang 923,8 mm Putaran di atas dudukan melintang 755 mm Diameter pembubutan maks. 356 mm Panjang pembubutan maks. 510 mm Pergerakan X/Z 260/590 mm Putaran spindle 5000 rpm Revolver dengan 12 stasiun Lubang spindle 73 mm Kontrol: Iedpfju Sn Hzjx Aaheik MSX-850 III Dilengkapi dengan: Perlengkapan penjepit collet lengkap dengan collet Konveyor chip 3 dudukan alat standar Tanpa pemuat gantry termasuk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock / fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100% / 40% duty cycle kW 3.0 / 5.5 Torque 100% / 40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Toolholder stations quantity 8 driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Holder diameter mm 45 Drive power 100% / 40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Toolholder stations quantity 8 driven tools quantity 8 Max. speed rpm 12,000 Holder diameter mm 45 Drive power 100% / 40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Ijdowuddvepfx Aahoik Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back-working attachment Toolholder stations quantity 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Holder diameter mm 25 Sub spindle Max. spindle capacity mm 20 Max. speed rpm 10,000 Drive power 100% / 40% duty cycle kW 3.0 / 5.5 Torque 100% / 40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system basic unit Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x width x height mm see installation plan* Weight kg 5,000* Connected load kW 40 (47 kVA)