Tekan sabuk

ISAR ISP 650

Kondisi: baik (bekas), Automatic ROPP-afsluitmachine Fabrikant: Bertolaso Type: Automatische ROPP (diefstalveilig) afsluitmachine Model: Alfa 110-VH40 Capaciteit: Tot 2.000 doppen/uur Afmetingen: L x B x H = 1.800 x 800 x 1.800 mm Elektrisch: 380 Volt – 50 Hz Gereedschappen: Naar keuze klant Kenmerken: Inclusief dopsortering Nodpog Dvfwsfx Abvowd In huidige staat of aangepast aan klantspecificaties

Tahun pembuatan: 2026, Kondisi: baru, Washing line for fruit and vegetables. The unit is constructed entirely from stainless steel. It features a sorting grid, washing tank, and conveyor belt. The fruit drops into the water and, after pre-washing, is conveyed by the belt where it is thoroughly cleaned with fresh water. The cleaned produce is then transferred to the mill, where various sieves can be used to achieve the desired mash consistency. The washing line is equipped with a dosing attachment for packing presses. Nwsdpfetu Ikcox Abvjd Technical data: • Rated output: 1,500 kg/h • Power requirement: 3 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L/shift • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • IP65-rated electrical control box • Pivoting grater mill • Fitted with mobile castors • Easy to clean • Through the frequency converter, the conveyor throughput can be easily adjusted Dimensions: Length: 3,250 mm Width: 840 mm Height: 2,270 mm Weight: 200 kg

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), DP-05180-JEC Nsdpfx Aeh Inqiobvjwd

Tahun pembuatan: 2026, Kondisi: baru, Our belt presses are equipped with two large pressing rollers that extend the pressing process, thereby ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tensioning and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press is equipped with an automatic brush cleaning system, so a high-pressure cleaner is not required. The belt is cleaned by six specially-developed water nozzles. For cleaning, only a compressor with 8 bar pressure capacity and a ½" water connection are required. Thanks to these special nozzles, water consumption is reduced, resulting in lower operating costs. The open design enables quick and simple cleaning that can be completed in just a few minutes. Nwodpsv Sq S Njfx Abvod Technical Information • Rated capacity: 950 kg/h • Power supply: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h 6 bar • IP65 electrical control cabinet • Juice yield: Up to 75% • Fully automatic and stepless belt speed control • User-friendly • Easy to clean • Lockable castor wheels Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Intake height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Kondisi: siap digunakan (bekas), Manual feeding of the crown caps into the chute; the machine places the crown cap onto the bottle and presses it on. Nedpofh Dlrofx Abvowd

Kondisi: bekas, Data teknis: Perjalanan X: 700 mm Kecepatan putar: hingga 1500 rpm Feed: 12 - 1000 mm/menit Ukuran meja: 1100 x 250 mm Kepala dapat diputar: ya Dimensi, sekitar: 1750 x 1600 x 1850 mm Berat, sekitar: 1900 kg Nwodpfx Abextnn Tevsd

Kondisi: bekas, The unit is in perfect condition and includes: 1. Teko ROXSTA 2.0 compressor pack featuring 4 Bitzer CO2 compressors (4DTC-25K-40P) and 1 Bitzer CO2 compressor (4FTE-20K-40S), complete with original control cabinet. - Compressor types: 4DTC-25K-40P (x4), 4FTE-20K-40S (x1) - Displacement: 21.2 m³/h (x4), 17.5 m³/h (x1) - Cooling capacity for CO2: 264.5 kW at -5°C/30°C, 222.6 kW at -10°C/30°C, 153.5 kW at -20°C/30°C - Compressor pack dimensions: 3300 x 950 x 2200 mm - Control cabinet dimensions: 1350 x 950 x 2000 mm - Year of manufacture: 2018 2. Evaporators – 5 units, Guntner S-DHN 051C/24, double-sided, fully stainless steel (housing and coil block) - Model: S-DHN 051C/24 - Cooling capacity: 18.9 kW at DT8, 15.3 kW at DT7 - Surface area: 101.9 m² - Airflow: 11,240 m³/h - Fin spacing: 4 mm - Fans: 2 x 510 mm - Dimensions: 2550 x 1560 x 480 mm - Stainless steel housing and coil block - Year of manufacture: 2019 - Capacity: 25.7 l - Weight: 149 kg - Quantity: 5 units 3. Evaporators – 3 units, Guntner S-CXDHN 046C/37, double-sided, fully stainless steel (housing and coil block) - Model: S-CXDHN 046C/37 - Cooling capacity: 21.9 kW at DT8, 17.7 kW at DT7 - Fin spacing: 7 mm - Fans: 3 x 460 mm Nedpsxpvtcofx Abvswd - Dimensions: 2950 x 1560 x 480 mm - Stainless steel housing and coil block - Year of manufacture: 2021 - Capacity: 29.9 l - Quantity: 3 units 4. Evaporator – 1 unit, Guntner S-CXDHN 046C/37, double-sided - Model: GADC CX 035.1/41M/HEC7E.TNNN - Fin spacing: 7 mm - Fans: 4 x 350 mm - Dimensions: 3150 x 1000 x 300 mm - Electric defrost heaters - Year of manufacture: 2024 - Capacity: 14.2 l - Quantity: 1 unit 5. Evaporators – 4 units, Guntner GACC CX 040.1/3-70.E-1845718M - Model: GACC CX 040.1/3-70.E-1845718M - Cooling capacity: 17.8 kW at DT8, 14.4 kW at DT7 - Heat exchange surface: 63.3 m² - Airflow: 8,640 m³/h - Fin spacing: 7 mm - Fans: 3 x 400 mm - Dimensions: 2370 x 550 x 580 mm - Electric defrost heaters - Year of manufacture: 2019 - Capacity: 11.1 l - Weight: 114 kg - Quantity: 4 units 6. Condenser Guntner GVD080.4C/2x3-EK.E, V-type - Model: GVD080.4C/2x3-EK.E - Year of manufacture: 2018 - Capacity: 60.2 l - Fans: 6 x 800 mm, 490 RPM, with frequency inverter - Dimensions: 4500 x 2320 x 2850 mm

Tahun pembuatan: 2026, Kondisi: baru, Washing system with grinding mill for fruits and vegetables, constructed entirely from stainless steel, equipped with a sorting grid, washing tank, and conveyor belt. The produce is loaded into the water for a preliminary wash, followed by transfer via the conveyor belt, where it is thoroughly cleaned with fresh water. After cleaning, the produce is fed into the mill, where it is processed to the desired pulp fineness using the selected sieve. • Easy to clean • Low maintenance effort • Belt speed continuously adjustable in both directions • Fitted with 2 swivel castors • Fitted with 2 fixed wheels Technical specifications: • Rated capacity: 2,000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1,400 mm • Connection for washing tank: G 6/4” Njdpfev Srguex Abvewd • Cleaning connection: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water requirement: approx. 12 L/min Dimensions: Length: 2,700 mm Width: 840 mm Height: 2,270 mm Weight: 150 kg

Tahun pembuatan: 2004, Kondisi: bekas, Halfautomatische schroefdopmachine Merk: Zalkin Model: TM-3 Bouwjaar: 2004 Momenteel uitgerust voor maximaal 90 mm dop Bediening: hand-/voetschakelaar Nwjdpfx Abjiby Hmevod In werkende staat

Tahun pembuatan: 2021, Kondisi: baru, Aluminum angle conveyor belt including substructure Horizontal section: 2000 mm (adjustable) Inclined section: 2200 mm (adjustable) Bend angle freely selectable: 30°, 35°, 40°, or 45° Belt width: 500 mm (adjustable) We supply our conveyor belts in PVC, PU, or rubber. Nwodpshh A Thofx Abvsd PVC conveyor belt including cleats and corrugated edge Drive unit: 1.1 kW motor (adjustable), speed 0.3 m/sec Connection: 220/240V, 50Hz, IP54 protection rating Drive system pre-wired, motor control optional 6x adjustable machine feet for alignment Corrugated edge: 40x35 mm (adjustable) T-20 cleats – 400 mm spacing (adjustable) 2-ply, particularly cross-rigid Our core competence lies in delivering exactly what the customer truly needs. Together with our customers, we develop custom, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone as well to find the right solution for your application. Conveyor, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator