Jowat lem EVA hotmelt

JOWATHERM JOWAT 280.30/ 280.31

EVA hot melt adhesive without filler 280.30/31

Hjdpfx Agsx Sqnvjkenn
Applications:
Edge Banding
Suitable for bonding thermoplastic edge bands (e.g., ABS, PP, PVC), resin-impregnated decorative paper edge bands, veneer edge bands (with or without fleece backing), and solid wood edging.
It is essential to test the bond properties and the surfaces of the substrates to be bonded (including reverse-side priming or other surface treatments) for their suitability prior to use.

Processing Instructions:
Automatic feeding systems can be used for processing the adhesive granulate. The ambient temperature should not exceed 30°C.
Different types of hotmelts may be incompatible depending on their formulation. For this reason, we recommend thoroughly cleaning the application equipment when switching products. Further information is available on request.
Processing characteristics may vary depending on the application technology used and deviations in feed speed, which can affect the bonding process. Customer trials are required!

Typical Characteristics:
Processing temperature [°C]: 180 – 200
Feed speed [m/min]: 10 – 40
Appearance: last digit 0 = yellow opaque
last digit 1 = white
Density at 20°C [g/cm³]: approx. 1.03 ± 0.03
Softening point [°C]: approx. 90 ± 5 (Kofler heating bench)
Viscosity at 190°C [mPas]: approx. 66,000 ± 10,000
Heat resistance [°C]: approx. 80 ± 5
Open time at 190°C [s]*: approx. 6 ± 2
Setting time: not applicable
* measured with a 200 μm film
Characteristics determined according to Jowat testing methods

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.