Pemuat samping

Jumbo JDQN40/14/40

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely inspected prior to delivery ----- Technical Data Summary (additional accessories possibly included upon request) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g., for edge rounding from above > Laser alignment light for recognizing the saw section Pos. 2: Rounding Unit Horizontal Bottom ----- > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically coupled to crosscut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3500 mm > Electronic length stop Pos. 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 3,500 rpm > Max. tool diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st Profiling Spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash bar support rail from above in the area of vertical right profiling unit and profiling spindle. Pos. 6: Profiling/Milling Unit, Horizontal Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Dodpfxevu Hghs Adgekg Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/Grooving Unit from Below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Kondisi: bekas, Tahun pembuatan: 1985, Berat: sekitar 3000 kg Dimensi: sekitar 3700 x 2000 x 1600 mm Lokasi penyimpanan: Nattheim Dkedsvvi Ttjpfx Adgjg

Kondisi: bekas, Weinig Unicontrol 10 (UC 10) angle processing line for the production of windows, components, and doors. Suitable for frame-based, series, or single-part production, featuring 2 tenoning and mortising spindles, including Oertli tool set. - Units/equipment: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC axis, ø 50 mm, 15 kW, Clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC axis, ø 50 mm, 11 kW, Clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, Clamping length: 4 x 80 mm 5. Profile milling unit, horizontal, from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, Clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, Clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis, 3 kW Dkedpfsv Ag Tdox Adgeg - Twin part package - Rebating package with rebate carriage - Automatic turning system - NEXUS PC control - CNC-controlled length stop - Studio window configuration - Unit for bottom edge rounding with crosscut saw - Glazing bar support rail - Including extraction duct system - Including Oertli tool set - Further technical data and tooling diagrams available on request.

Kondisi: siap digunakan (bekas), Dijual: konveyor sabuk seperti pada foto, panjang sekitar 8 m. Lebar sabuk: 0,3 m. Tersedia opsi transportasi. Dkodor Nvx Uepfx Adgeg

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly checked prior to delivery Technical Data Summary (Please enquire regarding any additional included accessories) Pos. 1: Crosscut Saw ----- > Electronic, horizontally adjustable crosscut saw (stepless) > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut identification > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated into the control system. > Length: 3500 mm Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm Dkedevu Hfqspfx Adgeg > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Guide rail at the fence (climb-milling spindle area), Sash bar support from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 5: Horizontal Top Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online capable > Rebating unit for tear-free rebating > Double part clamping kit > Return feed device for one-person operation: swivel belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Weinig type manufacturing program > Supplied without machining tools No original images yet available. Photos show a similar machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Kondisi: baik (bekas), Robot Industri Produsen: Kuka Tipe: KR6, KR6-2, KR6arc Tipe: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F Semua tipe dengan kontrol KRC2ed05 Kuka KR6 KRC2ed05 Tahun pembuatan 2006 Kuka KR6-2 KRC2ed05 Tahun pembuatan 2011 Dkedpfxjtuc U Ro Adgsg Kuka KR6arc KRC2ed05 Tahun pembuatan 2006-2007 (beberapa unit tersedia di stok) Kuka KR16L6 KRC2ed05 Tahun pembuatan 2009 Kuka KR16L6-2 KRC2ed05 Tahun pembuatan 2011 Kuka KR16 KRC2ed05 Tahun pembuatan 2007-2009 (beberapa unit tersedia di stok) Kuka KR16-2 KRC2ed05 Tahun pembuatan 2010-2012 (beberapa unit tersedia di stok) Kuka KR16-2 Speed KRC2ed05 Tahun pembuatan 2012 (beberapa unit tersedia di stok) Kuka KR16-2 Foundry KRC2ed05 Tahun pembuatan 2012

Kondisi: baik (bekas), Tahun pembuatan: 2002, jam operasional: 5.900 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 74343, lebar kerja: 1.350 mm, panjang sabuk penggiling: 2.620 mm, lebar sabuk penghalus: 1.370 mm, Mesin Amplas Pita Lebar Bütfering Optimat SBC 313 Tahun pembuatan: 2002 Model: Optimat SBC 313/QCE/Classic Dedpfoqvl D Hsx Adgokg - dengan 3 unit (deskripsi terlampir pada foto) - pengamplasan dari atas Lebar kerja: 1350 mm Lebar sabuk amplas: 1370 mm Panjang sabuk amplas: 2620 mm Lebar sabuk amplas melintang: 150 mm Panjang sabuk amplas melintang: 4700 mm Informasi lebih detail tersedia pada foto.

Kondisi: baru, Motor power 5 kW Saw blade diameter 300–350 mm Feed speed 0–40 m/min Weight approx. 1,300–1,800 kg Concept 350 Elite "Partnership Edition" Pressure Beam Saw Cutting length: 3,200 mm (other cutting lengths available upon request) --- Combines the advantages of various sawing systems. As flexible as a panel saw, as precise and safe as a pressure beam saw, and as ergonomic as a rip saw. --- Manufacturer Description: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam including LED lighting with 3 action colors: WHITE: machine in standby RED: pressure beam lowering or emergency stop function BLUE: saw unit moving - Variable support table 1,000 x 500 mm - Scoring system using the main saw blade in synchronous operation - Automatic workpiece length detection for minimum travel distances - Mobile and height-adjustable control panel, including: saw blade holder, template holder, emergency stop button, start button, selector switch for grooving/scoring/sawing, rotary switch for feed speed, laser switch (option), and USB socket Partnership Edition includes: Dkedpewli Nrjfx Adgog - Motorized width stop with 4 synchronized aluminum stops. All 4 stops move up to 1,300 mm. Table width is approx. 2,000 mm. - Windows-based control (10'' touchscreen). The graphical interface offers the following functions: tool database, angle cut compensation at the length stop, cutting plans can be created and saved, programs can be saved to USB, exported, and imported. - Telescopic stop extendable to 3,400 mm with 2 digital readouts Technical Data: - Max. saw blade projection with 350 mm blade: 100 mm at 90° / 70 mm at 45° - Saw blade: diameter 300–350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (= 7.5 HP) - Feed speed: 0–40 m/min - Total length: approx. 2,650–4,250 mm (depending on cutting length) - Weight: approx. 1,300–1,800 kg (depending on cutting length and equipment) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm --- Price for the above machine with selected configuration upon request! --- Model Variants: - CONCEPT 350 Elite with 2,600 mm cutting length - CONCEPT 350 Elite with 3,200 mm cutting length - CONCEPT 350 Elite with 3,800 mm cutting length - CONCEPT 350 Elite with 4,200 mm cutting length and longer upon request! General Options (with surcharge): - 47/17 Multistop 2,100 mm: the motorized width stop travels up to 2,100 mm instead of 1,300 mm - FIMAL389 Cutting height 150 mm with rigid saw unit, complete including: programmable saw blade height adjustment, saw motor with stepless speed control 1,500–4,300 rpm - 3410451 Cutting line laser, green - Saw motor with 7.5 kW (10 HP) including automatic star-delta start - 41/04 Programmable saw blade height adjustment, including height correction when tilting the saw unit - 3380132 Mitre stop +/- 50° tiltable with length compensation, including telescopic stop with folding stop - 3380135 Mitre stop +/- 50° tiltable with length compensation, inc...

Kondisi: baru, Table width 3000 mm Table length 1500 mm Number of torch heads 1 CNC control system Feed rate 20,000 mm/min Total power requirement 15 kVA Space requirement approx. 4.5 x 2.5 m * Heavy-duty machine bed with precision guides for smooth machine movement * Ball-bearing cross carriage for height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting area ensures maximum precision * Automatic height detection and torch height control during cutting * Torch holder with collision protection and automatic shutdown in case of collision * Machine installation or relocation via plug & play with forklift, pallet truck, or crane * 3-sided access to the cutting area thanks to cantilever design SATOTEC Downdraft Table: The SATOTEC table system features a robust table construction for a maximum cutting thickness of 150 mm. Oxy-fuel cutting technology is required for cutting workpieces up to 150 mm. The workpiece support frame is equipped with interchangeable flat steel slats, 3 mm thick, mounted at a 45° angle. The spacing between the slats is 50 mm. Kjellberg Q1500 Power Source: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and underwater * Recommended cutting range: 0.5 to 40 mm * Maximum piercing thickness 30 mm, higher with ProPierce Technology * Marking, notching, and center punching also on coated metal materials * Inverter power source with digitally controlled, fully electronic process sequence * Integrated cooling system with semi-automatic filling and draining Gas Control: Fully automatic, processor-controlled plasma all-gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: Integrated CAD/CAM module in the machine control system TEKA EcoCube 5.5 kW Extraction Unit: Filtering medium: dry, grease-free or oil-free dust / fumes Filter area: 100 m² (4 cartridges at 25 m² each) Filter cartridge: BIA M, Type Nano Dsdspm U U Nepfx Adgjkg Separation efficiency: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz Current consumption: 11.5 A Current type: 3Ph+N+PE Fan installation: integrated in the system, incl. silencer duct bend, right side Motor control: frequency inverter Noise level: 75dB(A) + max 10 dB(A) during cleaning pulse Suction nozzle: NW 250 mm via suction duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm Equipment color: - Fan housing: light grey - Cartridge housing: RAL 5007 brilliant blue Special Equipment: - Closure hooks and toggle latches - Compressed air connection and condensate drain, each fitted with bulkhead fitting - Compressed air connection with hose nozzle d=8mm - System equipped with grounding studs - Cables in UL version - EATON frequency inverter mounted on the left in the control cabinet

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), A Gross Apparatebau GmbH shredder, previously used in the timber industry, is available. Feed opening (X/Y): 600mm/800mm, Hopper volume: 0.6m³, Rotor diameter: 252mm, Rotor length: 600mm, Rotor speed: 90rpm, Drive power: 18.5kW, Number of knives: 14, Screen perforation: 10mm-40mm, Extraction port diameter: 160mm, Machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, Weight: approx. 1300kg, Operating hours: 4578h. Documentation is available. An on-site inspection is possible. Dodeu Nlkxopfx Adgskg