Rak tugas berat

Kragarmregal einseitig Höhe: 4.200 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Nsdpemidyfefx Ab Eodd Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: baru, Tahun pembuatan: 2025, Semi-automatic optimizing crosscut saw with electronic positioner featuring push/stop operation mode COST-OPTIMIZING SAWING SOLUTION Superpush 150 is the entry-level center for cutting and optimization. Developed as a direct technological evolution of traditional cutting methods, it is capable of increasing productivity and maximizing wood yield. EXCEPTIONALLY ROBUST Heavy-duty, fully welded and reinforced painted steel frame. Horizontal table with movable guard to facilitate workpiece loading. Carriage operating both as length stop and pusher. Linear unit with steel-reinforced toothed belt and linear bearing guides. Continuous horizontal piece accumulation table, 300 mm wide. TECHNOLOGICALLY INNOVATIVE Electronic system featuring an integrated CNC touchscreen control panel. Linux-based software with customized interface. 15.6” color resistive touchscreen display for full safety in industrial settings. Program import via USB. Remote teleservice capability via Internet. + Excel macro integration. Nodpfxog Hzvgj Ab Eedd FAST S4U Lite software suite. Brushless positioner motor with digital servo driver. Quick-select interface for Stop/Pusher mode. Adjustable cutting speed. RELIABLE AND SAFE Ball bearing slides with double dust protection. Freestanding electrical cabinet, separated from the machine. Independent pneumatic adjustments for adapting to different processing types. Two-hand safety control for cutting operation. CE-certified machine from a Notified Certification Body (not self-certified).

Kondisi: bekas, jarak tempuh: 29.232 km, daya: 110 kW (149,56 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, berat keseluruhan: 7.490 kg, pendaftaran pertama: 10/2000, kelas emisi: euro2, warna: hijau, jumlah tempat duduk: 3, Tahun pembuatan: 2000, Perlengkapan: penggerak semua roda,

Kondisi: bekas, Diameter rol: 800 mm Maks. tinggi potong: 440 mm Maks. lebar potong: 785 mm Tinggi meja: 970 mm Ukuran meja: 1170 x 800 mm Lebar mata pisau: 40 x 7/10 mm Panjang mata pisau: 5630 mm Diameter hisap: 120 mm Dimensi: 1625 x 940 x 2516 mm Berat: 770 kg Lokasi stok: Nattheim Ndedpfx Aowayzbob Esd

Kondisi: baik (bekas), Tahun pembuatan: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of Manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and precise. It has long been established on the market and is continuously improved in close collaboration with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you require. The large saw blade diameter (700 mm) also allows you to cut multiple sections of stacked timber simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cycle - PLC-programmable saw - Wood fixation close to the cutting area for precise results Roller conveyor system with 5 adjustable pneumatic stops. Length 6.25 m Discharge roller conveyor 4.10 m Ndjdpfx Ajh Ayyqeb Eed Complete line: 11.5 m Technical information subject to change.

Kondisi: bekas, jarak tempuh: 34.275 km, daya: 110 kW (149,56 hp), pendaftaran pertama: 10/2000, berat keseluruhan: 8.000 kg, jenis bahan bakar: diesel, warna: hijau, tipe perpindahan gigi: mekanis, kelas emisi: euro2, Tahun pembuatan: 2000, jumlah tempat duduk: 3, Perlengkapan: penggerak semua roda,

Kondisi: baru, Cutting range: Round 0°: 170 mm Square 0°: 150 x 150 mm Flat 0°: 150 x 190 mm Round 45°: 125 mm Square 45°: 95 x 120 mm Working height: 870 mm Cutting speeds: 40 / 80 m/min Saw blade: 2080 x 20 x 0.9 mm Coolant pump: 100 W Saw motor: 0.75 kW Nedpfjilk H Tsx Ab Esdd Connection: 400 V Dimensions (L x W x H), approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow pivotable up to 45° - Two band speeds for optimal adjustment to the workpiece - Ideal for cutting pipes, profile material and solid materials made of stainless steel, iron, etc. - Generously sized saw arm for low-vibration operation - Saw arm lowering by hydraulic cylinder - Low noise due to robust construction - Automatic shut-off after cutting cycle via micro switch - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Coolant system with pump - Includes base frame - CE/IEC certified, German documentation and German service Scope of delivery: - Bi-metal saw band 2080 x 20 x 0.9 mm, 6/10 TPI - Band tension adjustable via pressure gauge - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic cut-off after cutting cycle - Base frame

Kondisi: baru, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, narrow-track tractors, viticulture and horticulture applications, and many more uses. The hydraulic attachable winch makes many tasks easier. Nedpfx Absdf Ua Rj Eedd - Pulling and positioning firewood to the log splitter - Hauling logs onto trailers - Extracting tree stumps and trees - As an auxiliary winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-way mounting options (left, right, rear), featuring 12 threaded holes. This allows various options for attaching the winch (threads are pre-cut and painted. They must be recut with a tap before use for corrosion protection). Fitted with a 20 m long, 6 mm thick steel cable. Large cable drum for extended cable life. We fit hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the speed and pulling force required. Maximum working pressure: 225 bar (peak) Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm (peak) Continuous torque: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm Item number: HAW1700 NOTE: Image 1 shows configuration with manual valve, images 2, 3, and 4 are mounting examples!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm Nedpfxeh Ek Daj Ab Ejdd - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Ndedpfjmhhf Sjx Ab Ejd Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.