Forklift

Jungheinrich EFG425K Valid inspection, *Guarantee! Electric, Li

Kondisi: bekas, Tahun pembuatan: 2012, nomor mesin/kendaraan: MB0001-000031, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.200 mm, gerak cepat sumbu X: 12 m/menit, pergeseran cepat sumbu Y: 12 m/menit, pergerakan cepat sumbu Z: 12 m/menit, panjang umpan sumbu Y: 6 mm, kecepatan pemakanan sumbu X: 6 m/menit, laju pemakanan gandar Y: 6 m/menit, laju pemakanan sumbu Z: 6 m/menit, produsen pengendali: FANUC, model controller: 32i Model A, diameter benda kerja (maks.): 2.550 mm, berat benda kerja (maks.): 7.000 kg, tinggi total: 4.200 mm, panjang total: 5.540 mm, lebar total: 5.930 mm, lebar meja: 1.400 mm, panjang meja: 1.600 mm, berat keseluruhan: 29.000 kg, kecepatan spindel (maks.): 3.000 rpm, jarak dari tengah meja ke hidung spindel: 1.750 mm, daya motor spindle: 26 W, hidung spindel: BT50, jumlah slot dalam magazin alat: 60, panjang alat: 600 mm, diameter alat: 250 mm, berat alat: 30 g, Sumbu B: 1 derajat Kontrol: FANUC 32i-Model A Jarak dari hidung spindle ke permukaan meja: 0 - 1500 mm Jarak dari hidung spindle ke tengah meja: 550 - 1750 mm Dimensi mesin: 5540 x 5930 x 4200 mm Berat mesin: 29.000 kg Kecepatan makan pemotongan maksimum: 6 m/menit Diameter alat maksimum: 250 mm Panjang alat maksimum: 600 mm Berat alat maksimum: 30 kg Berat benda kerja maksimum: 7.000 kg Kecepatan gerak cepat: WXYZ: 6 x 12 x 12 x 12 m/menit Diameter spindle: 110 mm Daya motor spindle: 26/22 kW Kecepatan spindle: 3.000 rpm Ayunan: 2.550 mm Ukuran meja: 1.400 x 1.600 mm Kapasitas pergantian alat: 60 posisi Tipe alat: BT50 Bedpfx Aisxm Sxvoyjlh Lintasan XYZ: 2.000 x 1.500 x 1.200 mm Sumbu W: 500 mm Pendingin, lampu tegangan rendah, konveyor serpihan, kepala milling sudut kanan dengan jangkauan panjang, probe pengukur panjang alat, probe pengukur benda kerja Renishaw, pelindung mesin tertutup penuh.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 27.000 h, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.000 mm, berat keseluruhan: 21.000 kg, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 5, This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping area of 1000 × 800 mm, rapid traverse speeds up to 60 m/min, and a high-speed spindle with 18,000 rpm. The machine is equipped with a 60-position tool changer and a 980-liter coolant system. Accessories such as a chip conveyor, oil mist separator, and BLUM laser tool measurement enhance the machine’s functionality. If you are seeking high-quality milling capabilities, consider the DMG MORI DMC 100U duoBlock we have for sale. Contact us for further information. • Worktable: • Number of pallets: 2 (working/preparation area) • Pallet clamping area: 1000 × 800 mm • Pallet weight: 630 kg • Axis travels: • B: 210° • C: 360° • Motions: • Acceleration (X/Y/Z): 7.0 / 6.5 / 6.5 m/s² • Resolution (X/Y/Z): 0.001 mm • Positioning tolerance (X/Y/Z): 0.006 mm • Positioning tolerance (A/B/C): 8 / 6 / 5 arcsec • Workpiece capacity: • Max. diameter: 1000 mm • Max. height: 1600 mm • Max. weight: 2000 kg • Spindle: • Torque: 119 Nm (40% duty cycle) • Tool changer: 60 positions • Coolant unit: 980 liter high-pressure through-spindle coolant with paper belt filter • Availability: In excellent condition, available for demonstration (video available) Additional Equipment • 7 additional pallets • Chip conveyor • Oil mist separator • Infrared measuring probe • BLUM laser tool measurement • 3D Quick Set preparation • Cooling • Blown air through the spindle • Maintenance kit (filters, scrapers, installation tools) • Complete manuals (English, Estonian and digital copy) Blsdpfex D Eh Eex Aiyeh

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, GF Machining Solutions FORM X600 Year of manufacture: 2019 – Factory overhaul: 2022 C-frame design, fixed table with lowering tank Travel (X/Y/Z): 600 x 400 x 500 mm Distance table–quill: 200–700 mm Max. workpiece size (L x W x H): 1200 x 800 x 350 mm Max. workpiece weight: 2,000 kg Integrated C-axis for rotation, indexing, and EDM (U=0–100 rpm) Pneumatic chuck of choice (Erowa/3R Systems) ISPG generator with 80 amps Bedpfjwh Sigsx Aiyolh Best achievable surface finish: Ra 0.08 µm AC FORM HMI operating interface 15” LCD color screen, mouse or touchscreen, lift keyboard, and manual control Includes 3R Systems WorkPartner WPT1+ - 150 electrode positions - 10 pallet stations Net weight of the unit: 5,504 kg Machine dimensions: 1,790 x 2,860 x 3,100 mm The machine will be cleaned, serviced, and tested by us upon receipt of order. Options: - Commissioning and operator training - Transport and installation - Chiller unit - Dielectric fluid

Kondisi: baru, Tahun pembuatan: 2018, nomor mesin/kendaraan: DF0199 - Rev.00, gaya penekanan: 160 t, Tool Tryout Press – Manufacturer Calende – 160 t Assembly Press For sale is a tool tryout press from Calende with a maximum pressing force of 160 t. The machine features a bolster and ram plate of 1,670 × 800 mm each, a maximum working height of 800 mm and is particularly suited for die tuning, assembly, and tryout tasks in tool and mold making. Bedpfx Aiedxvfheyslh ==== Technical Specifications + Information: Tool Tryout Press Calende – Assembly Press ==== General Details - Manufacturer: Calende - Model: Tryout Press - Design: Assembly Press / Tool Tryout Press - Press force: 160 t - Machine weight: approx. 7 t - Dimensions (L × W × H): approx. 2,400 × 1,400 × 3,400 mm ==== Working Area - Clearance width: 1,200 mm - Max. working height: 800 mm - Stroke / Travel: 600 mm - Table height above floor: approx. 800 mm ==== Bolster and Ram - Bolster plate: 1,670 × 800 mm - Ram plate: 1,670 × 800 mm ==== Forces - Return force: 16 t ==== Speeds - Advance speed: 10 mm/s - Pressing phase speed: 10 mm/s - Return speed: 25 mm/s ==== Hydraulics - Motor power: 18 kW - Oil tank: 300 l - Electric oil cooling: 1.5 kW ===== Die tuning, tool tryout, assembly, moldmaking, toolmaking, press tool inspection, tryout operations Tryout Press, Tool Tryout Press, Die Tuning Press, Assembly Press, Tryout Press, Tool Testing Press, Hydraulic Press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are built in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they also comply in every respect with the Brazilian national safety standard NR 12, which is based on these regulations. Our core strength lies in special machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine was overhauled according to Kellenberger measurement protocol and newly painted. The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process. The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces. Bjdpfxjvq R Uzs Aiyelh Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm Machine equipped with reinforced workpiece spindle head for unsupported grinding of heavy workpieces. The machine undergoes a major maintenance/partial overhaul including geometry inspection protocol in accordance with the Kellenberger new machine directive. Blodpjv Dxxzjfx Aiyeh At present, the machine does not comply with the essential health and safety requirements set out in BetrSichV 2015. An adjustment to the required minimum safety level must be determined by means of a risk assessment as per BetrSichV.

Kondisi: bekas, nomor mesin/kendaraan: 15355, Tahun pembuatan: 2008, jam operasional: 15.561 h, kapasitas angkut: 12.000 kg, tinggi angkat: 5.500 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, tinggi konstruksi: 4.280 mm, Perlengkapan: kabin, 15355 Machine Details: Year of manufacture: 2008 Load capacity: 12,000 kg Lift height: 5,500 mm Displayed operating hours: 15,561 h Mast type: Standard Mast height: 4,280 mm Length/Width/Height: 4,600 / 2,500 / 3,000 mm Operating weight: 15,820 kg ---- Equipment: * Overhead guard * 3rd hydraulic valve * 4th hydraulic valve * Full cabin Bedpfx Aijtw Dfwoyslh * Heating * Front work lights * Rear work lights ---- Additional Equipment Information: Without fork carriage Rotating beacon Radio Single-pedal operation ---- Operating hours are generally based on the hour meter reading. We are happy to offer you suitable transport options. A further 250 - 300 forklifts, attachments, and sweepers are immediately available. Of course, also for rental! We are also interested in purchasing your USED equipment. Do you have any questions? You can reach us during business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors in this offer are expressly reserved. For trade sales, the machine is sold as-is, unrefurbished. All information subject to change and errors excepted.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 400 mm, berat benda kerja (maks.): 2.000 kg, gores kuas bulu: 400 mm, tabel jarak ke spindel: 215 mm, panjang benda kerja (maks.): 920 mm, lebar benda kerja (maks.): 550 mm, tinggi benda kerja (maks.): 550 mm, berat keseluruhan: 4.000 kg, Sinker EDM Machine GF AgieCharmilles Spirit 4 Year of manufacture: 2008 Travel paths (X/Y/Z): 700 x 500 x 400 mm Max. workpiece dimensions: 920 x 550 x 370 mm Max. workpiece weight: 2,000 kg Distance table – quill: 215 – 615 mm Tank level up to 415 mm Incl. pneumatic chuck 3R-Systems or Erowa ITS 50 (choice) Incl. 28-position electrode changer Max. electrode weight: 80 kg Incl. C-axis with U=0–40 rpm Total weight (without dielectric fluid): 4,000 kg Dimensions: 3,000 x 3,000 x 2,865 mm The machine will be cleaned, serviced, and tested by us after order confirmation. We are pleased to offer you the following additional services and products: - Commissioning - Transport Bedpfeq N Ap Sox Aiyjlh - Training - Clamping devices - Dielectric fluid - Cooling unit

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: 4273, gaya penekanan: 110 t, Die Übersetzung ins Englische für eine professionelle, technische Plattform wie Machineseeker könnte wie folgt lauten: --- Spotting Press – Manufacturer: Hidralmac – 110 t Try-Out Press – Table 1,200 × 1,000 mm For sale is a high-performance spotting press from Hidralmac with a pressing force of 110 t. The machine features a swiveling and traversable table, a large stroke of 1,150 mm, as well as high rapid traverse speeds, making it especially suitable for spotting, adjustment, and try-out work in tool and mold making. ==== Technical Data & Information: Spotting Press Hidralmac – 110 t Try-Out Press == General Specifications - Manufacturer: Hidralmac - Model: Spotting Press - Design: Try-Out / Spotting Press - Pressing force: 110 t - Machine weight: approx. 16 t - Dimensions (L × W × H): 4,200 × 2,400 × 4,800 mm == Working Area - Stroke: max. 1,150 mm - Table stroke: 1,200 mm == Table System - Table size: 1,200 × 1,000 mm - Swivel table: up to 45° - Max. table load: 12 t - Table traverse speed: 25 mm/s - Table swivel speed: 10 mm/s == Forces - Return force: 11 t == Speeds - Working speed: 0 – 10 mm/s (adjustable) - Return speed: 130 mm/s - Rapid traverse: 195 mm/s == Hydraulics - Drive power: 23 kW Bedpfx Asd Ap Ugeiyslh - Oil tank: 400 l - Recommended oil: DIN HLP / ISO VG 46 == Electrical - Voltage: 400 V - Control voltage: 24 V DC - Frequency: 50 Hz == Equipment - Colour scheme: - Machine body: RAL 7035 (Grey) - Moving parts: RAL 2009 (Orange) - Other components: RAL 7021 (Dark grey) ===== Spotting work, tool adjustment, tool try-out, mould making, toolmaking, try-out work, adjustment processes, large tooling Spotting Press, Tool Try-Out Press, Tryout Press, Tool Adjustment Press, Tool Try-Out Press, Tryout Press, Hydraulic Press Are you looking for a hydraulic press custom-tailored to your application? Contact us for an individual offer. Our hydraulic presses are built according to German machinery guidelines, as well as European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which is based on these standards. Our core strength lies in custom machinery engineering and press automation. We offer customized hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers. ---

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2015, nomor mesin/kendaraan: 4293, gaya penekanan: 40 t, Tuschierpresse – Manufacturer Hidralmac – 40 t Tryout Press – Table 1,000 × 700 mm For sale is a tryout press from the manufacturer Hidralmac with a pressing force of 40 t. The machine features an extendable and tiltable table (up to 45°), an installation height of 1,200 mm, as well as a precisely controllable hydraulic system, and is especially suitable for spotting, adjustment, and tryout operations in tool and mold making. ==== Technical Data & Information: Tryout Press Hidralmac – 40 t Tryout Press ==== General Information - Manufacturer: Hidralmac - Model: Tryout Press - Type: Tryout / Spotting Press - Pressing Force: 40 t - Machine Weight: approx. 8.5 t - Dimensions (L × W × H): 4,300 × 2,700 × 4,500 mm ==== Working Area - Installation Height (Table – Ram): 1,200 mm - Area Between Columns: 1,250 × 1,000 mm - Stroke: 1,200 mm - Table Height Above Floor: 700 mm ==== Table System - Table Size: 1,000 × 700 mm - Table Extension: 1,200 mm - Table Tilting: up to 45° - Table Travel Speed: 25 mm/s - Max. Table Load: 5 t ==== Tool Holder - Upper Tool Foldable: 170° ==== Hydraulics and Drive - Number of Cylinders: 1 - Column and Cylinder Material: SAE 1045 (C45), induction hardened and chrome plated ==== Speeds - Approach Speed: max. 95 mm/s - Return Speed: 80 mm/s Bljdpfx Aodxrqxeiyoh - Working Speed: 0 – 10 mm/s and 10 – 155 mm/s ==== Control System - Siemens Monitor: 9 inches - Linear measurement system for position monitoring - Adjustable: Travel path, stopping points, changeover points - Working speed freely programmable - Control system monitors hydraulics, pump, and safety areas - Separate control cabinet - Operator panel on swivel arm ==== Safety - Light sensors (SICK): 1,200 mm ==== Scope of Delivery - CE Declaration (2006/42/EC) - Manuals and operating instructions ===== Spotting operations, die adjustment, tryout operations, mold making, toolmaking, tryout processes, adjustment processes Spotting press, tryout press, tool tryout press, die spotting press, tryout press, hydraulic press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Moreover, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the Brazilian national safety directive NR 12, which is based on these standards. Our major strength is in special-purpose machinery and press automation. We supply customized hydraulic presses at surprisingly affordable prices. For the hydraulic systems, we use components primarily from leading European manufacturers.