Mesin bending pipa mandrel

Jutec 5000

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 54 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 4 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, tekanan (maks.): 250 batang, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for complex geometries to perform right- and left-hand bends. Plug-in bending tools allow for quick changeovers to different tube sizes. A rapid hydraulic system to minimize non-productive times is an important factor for series production. The clamping pressure for the tube can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can accommodate an almost unlimited number of programs storing bending angles, lengths, and rotation angles for up to 50 bending sequences on a single tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers 2 operating modes: In 'Simple Bending', the length and rotation of the arcs relative to each other are displayed automatically. In 'Controlled Bending' mode, the data is pre-set and a continuous setpoint/actual comparison is performed during bending operations. This excludes mispositioning within a tolerance window, effectively minimizing operator errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically activated upon reaching the bending angle. The compact drive unit with removable mandrel support offers benefits for on-site assembly as well as for special constructions with very long tube in-feeds and is also available as a stationary version with a tool and mandrel bar organizing system. A cost-effective alternative to fully controlled CNC machines. POTENTIAL APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant construction, e.g. for the chemical industry • Metal fabrication Gsdpfxeng Exaj Agrouc • Prototype construction Technical Data: • Bending capacity Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10mm/140mm • Min. bending radii: 1.5 x Ø (Standard 2 x Ø) • Multifunction machine control with bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (longer versions available upon request) • Maximum 180º bending result • Weight 800-900 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for clamping force supervision • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • You are welcome to join us for test production at our in-house demo room • Consulting and informational meeting at your site • Consultation and handling of leasing/finance purchase via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming in line with current standards. Technical data: - Heidenhain TNC 320 retrofit - Travel X- 500 mm, Y- 380 mm, Z-350 mm - Spindle mount SK 40 - Vertical quill stroke 50 mm - Spindle speeds 20-3150 rpm, infinitely variable - Feed range 1-3000 mm/min - Rapid traverse 5 m/min - Table load capacity 250 kg - Total power requirement 11.3 kW - Machine weight approx. 2 t - Handheld operating device - Safety enclosure Inspection or test run under power on site is of course possible. We are happy to offer you transport, installation, and commissioning at your site. Gsdoxw N S Ispfx Agrouc Everything from a single source: We, Baumgärtner CNC GmbH &, are a company specializing in: - Service - Maintenance - Overhauling - Automation of DMG machines and those of other renowned manufacturers. We support you! From machine purchase, transport, and installation all the way to commissioning and subsequent maintenance or repair work – you can count on us.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 54 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 4 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, radius tekuk (min.): 9 mm, tekanan (maks.): 250 batang, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right and left bending. The plug-in bending tools allow for quick changeover to different tube sizes. Fast hydraulics shorten auxiliary times, which is a crucial factor for serial production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angles, length measurements, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In 'simple bending' mode, the length and rotation of the bends relative to each other are displayed automatically. In 'controlled bending' mode, the data is preset, and during bending, a continuous actual/target comparison is performed. This eliminates mispositioning within a tolerance window, minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. The compact drive unit with detachable mandrel carrier offers advantages for on-site assembly as well as for special designs with very large tube feed, and is also available as a stationary version with an organizing system for tools and mandrel bars. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g. for chemical industry • Metal construction • Prototype construction Technical data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Min/max bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special lengths available) • Maximum 180º bending angle • Weight: 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-action chuck • Positioning of length and rotation via automatic braking function or manual stops using the foot switch • Semi-automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for supervision of tool clamping • 10-inch touch screen with integrated tube calculation Gusdpfx Aondn Agsgrsc • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome for test production at our facility in the demo room • Consultation and information session at your location • Leasing/financing purchase consultation and handling via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2026, CNC drilling and milling machine Kudu with CNC control and tool changer (3-axis) Drilling and milling machine with movable processing unit – the table remains stationary, and the drilling head moves. The drilling unit can operate both manually and fully automatically. After each drilling cycle, the processing unit automatically moves to the next drilling position along the X and Y axes. Operation is designed for ease of use. Data transfer to the machine control is possible via DXF/DWG file formats using a programming station. Alternatively, programming can also be performed directly at the machine control unit. The system is highly robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drill head speed: up to 2,500 rpm (standard version), supplied with the appropriate speed for your application • Tool holder: SK 40 • X, Y and Z axis driven by servomotors • Rapid traverse in X axis: 20 m/min • Rapid traverse in Y axis: 5 m/min • Distance from table top to bottom edge of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St 50 (tool-dependent) • Tapping: M4 – M30 (with compensation chuck) • Y-axis travel: 300 mm • Positioning tolerance X axis: ±0.1 mm • Positioning tolerance Y axis: 0.06 mm • Positioning tolerance Z axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Compressed air connection: 8 bar • Front safety via light barrier • Rear access protection via safety fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming directly at the machine • Milling of elongated holes and circles • Lubrication via minimal quantity spray system • Without material clamping devices • Remote maintenance via Teamviewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions, rotational speed • Simulation of work processes • Digital handwheel Your benefits: • Workpiece surfaces are protected • Clear, graphical user interface • Machining directly at the workpiece end is no problem • 50% space savings compared to moving-table systems • Chips are collected in a chip tray Gsdpfxjfu Ivzj Agrsuc • Easiest programming & operation • Minimal quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired system at any time in our production/showroom. Please feel free to contact us about this. We look forward to your inquiry! Plantec Maschinen GmbH

Tahun pembuatan: 1978, Kondisi: sangat baik (bekas), Technische Daten: -Hersteller: DRAWEBA Gsdpfx Aelf Iqnegreuc -Modell: DDANS 17 l -Baujahr: 1978 -Drahtdurchmesser: 1,4 - 1,6 mm -Maschenweite (min.): 10 x 10 mm -Netzbreite: 1600 mm

Kondisi: baik (bekas), Tahun pembuatan: 1962, Radial arm drilling machine, pillar radial drilling machine, bench drilling machine, radial arm drill, high-speed radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Spindle taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev Godpfx Asirax Ujgrsuc - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Kondisi: siap digunakan (bekas), Dijual meja putar Nikken CNC 400 dalam kondisi sangat baik! Sudah dipersiapkan untuk kontrol Mazak M32, tetapi dapat diubah sesuai kebutuhan. Diameter piringan 400mm. Dimensi P/L/T: 740/240/420mm. Jika ada pertanyaan lebih lanjut, saya siap membantu. Gsdpfx Agoya Dtmorsuc

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Kombinationseinheit: Hersteller: GSG Vorschub: Typ: 840.02-027 Zerkleinerer/Entschupper: Typ: 663.02-017 Drahtbereich: Ø5,5–16 mm Für Walzdraht mit ca. 40–60 daN/mm² Festigkeit Zerkleinerungs- und Biegerollen: Hartmetalleinsätze Verstellung mittels 0,37 kW – 1,15 A Getriebemotor Bürstenantrieb mit 0,25 kW Getriebemotor, n=293 U/min Anschlussspannung: 380–420 V, 50 Hz Trockenschmiereinheit: Typ: BSG/T Befüllung: Calciumstearat (z.B. Traxit Typ: D S 51 E) Stearatverbrauch: ca. 350 g pro t Draht Ziehgeschwindigkeit: max. 15 m/s Elektrische Leistung: 2x 0,55 kW Getriebemotoren Kassette: 2 Steckplätze (geliefert mit 1x Rollenblock + 1x Kassette) Typ: PKG/T (TS) Gereinigter Walzdraht Drahtfestigkeit ca. 40–60 daN/mm² Drahtbereich max. Einlaufdurchmesser 9,5 mm, Fertigdurchmesser 3,5–8,5 mm Rollendurchmesser min. Ø115 mm, max. Ø125 mm, Bohrungsdurchmesser Ø82 mm, Breite 15–25 mm Kühlstiftdurchmesser 25 mm Kühlwasserverbrauch ca. 600 l/h Ziehmaschine: Hersteller: Koch Typ: KHZ 5000 Baujahr: 1993 Seriennummer: 13.821 Anzahl der Züge: 1 Zug pro Block Ziehscheibe: Ø700 mm Zugkraft: mechanisch 5.000 N Drahtmaterial: weiche Stahldrähte Einlaufzugfestigkeit: ca. 40–45 daN/mm² Max. Ziehbereich: Einlaufdurchmesser 5,0–8,5 mm Querschnittsreduzierung: 20 x 25 % (mechanische Staffelung) Ziehgeschwindigkeit: bis max. 7,0 m/s Bremse: Twiflex, Typ: MRB Antrieb: Drehstrommotor/Frequenzumrichter, Siemens PN=110 kW, n=1.485 U/min Spuler: Hersteller: Koch Gusdjr Nfvmjpfx Agrsc Typ: KHS 1250 Baujahr: 1993 Fabrik-Nr.: 13741 Drahtdurchmesser: 5–8,5 mm Festigkeit: ca. 55–70 daN/mm² Wickelgeschwindigkeit: V=7 m/s, abgestimmt auf die Ziehmaschine Befüllungsgewicht: ca. 3.000 kg Spulenantriebsmotor: Drehstrommotor mit Außenlüfter Typ: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1.000–2.000 U/min, IP54, Bauform B3 Lageantriebsmotor: 66-671U, 1,5 kW, 170 V, 9,8 A, 1.680 U/min, IP44, B5-200 Mit angebautem Tachogenerator TG 20, 20 V / 1000 U/min Mit angebautem Stirnradgetriebe SK 32, i=57,53, Bauform B6 Hydraulik: Hydraulikbagger Typ: H13 AK Pneumatik: Twiflex-Scheibenbremse Typ: MRB Pneumatikzylinder Typ: SPWG 28032-25mm Hub Abmessungen: 3.100 x 3.000 x 1.700 mm (L x B x H) ohne Gegengewicht

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 250 h, nomor mesin/kendaraan: 0131, jenis kontrol: Kontrol NC, tingkat otomatisasi: semi-otomatis, jenis aktuasi: hidrolik, Diameter pipa (maks.): 48 mm, Panjang pipa (maks.): 3.000 mm, Ketebalan dinding tabung (maks.): 4 mm, Sudut pembengkokan (maks.): 180 °, berat keseluruhan: 670 kg, tegangan masuk: 400 V, frekuensi input: 50 Hz, jumlah tampilan digital: 1, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, sistem pelumasan terpusat, T U B O M A T - simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small batch production. With the software, each tube can be parameterized, simulated, and saved. The bending data is then transmitted to the machine via a network (LAN). Standard Bending Equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Well-known 4-stage bending angle preselection or program mode - 80 memory slots for up to 10 sets each - Setpoint/actual value display for bending angles - Compact, extended bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven manual lever - Hydraulic tube clamping - Hydraulic pressure die adjustment - Hydraulic mandrel extraction - Mobile machine design - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base mount as drive unit for assembly attachments Technical Data - Tube range up to: 48.3 x 3.25 mm (E235 with Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Maximum bending angle: 180° (+ 10° overbend) - Bending accuracy: ± 0.2° - Bending speed: 20°/s - Dimensions (L / W / H): 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Connection data: 400 V / 50 Hz / 3-phase - Power supply protection: CEE 16 A - Color: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic Package tube bending software - Oracle Express database for single-user application Gusdpfx Agox E Rdwersc - Creation of isometrics (single tube) - ConCSVImp - CSV format import interface - Calculation of bending data considering springback, elongation, and swelling - Verification of clamping lengths, start, and end lengths - Output of bending data (printout) - BendSim - Bending simulation and graphical representation through parametric tool configuration - BendCon - Creation and transmission of NC bending data for TUBOMAT - Data transfer via LAN Tool Holders 1 adapter set for bending rolls with 25 mm mounting bore 1 clamp adapter, installation space 100 mm 1 support for fixed pressure die, installation space 100 mm Tools Bending tools consisting of bending roll, clamping piece, and pressure die (fixed) Tube Diameter / Bending Radius - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Bending Mandrels 3000 mm for Steel Tubes Design with lubrication channel for minimum quantity oil lubrication - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy-duty design) Pipe Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Counter plates for pre-assembly of cutting rings with automatic pressure setting for steel and stainless steel tubes Pipe Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses available on request. The machine is used but in like-new condition. The machine can be viewed and demonstrated by appointment. The machine must be collected from our premises but can be loaded by us. Commercial sale – price plus 19% VAT. Subject to prior sale and errors.

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), - BEKAS - MESIN POTONG LASER FIBER UNTUK PIPA DENGAN SISTEM PEMUATAN/PEMBONGKARAN BAGIAN LINGKARAN MIN: ø 25 mm BAGIAN LINGKARAN MAKS: ø 355 mm BAGIAN KOTAK MAKS: 260 X 260 mm Gujdpfex E Eihjx Agrjc BAGIAN PERSEGI PANJANG MAKS: 300 X 200 mm BEBAN MAKSIMAL YANG DIIZINKAN: 100 Kg/m SUMBER: IPG YLS-4000 ; 4000 W UNIT KONTROL: SIEMENS 840D BERAT: 12.500 Kg CATATAN: PEMUATAN OTOMATIS 3-12,5 m; PEMBONGKARAN OTOMATIS 12,5 m; KEPALA POTONG 3D; SENSOR KAPASITIF; PENYESUAIAN OTOMATIS