Forklift diesel

Kalmar DCE80-9

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2005, jam operasional: 10.573 h, kapasitas angkut: 8.000 kg, tinggi angkat: 3.000 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, tinggi konstruksi: 2.800 mm, lebar kerangka garpu: 2.000 mm, panjang garpu: 1.200 mm, berat kosong: 12.100 kg, panjang total: 4.150 mm, jenis penggerak: Diesel, lebar konstruksi: 2.050 mm, Diesel forklift Kfjdpfx Aajx Ixncohsa Load center: 900 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 8.25-15 Rear tires type: Superelastic Rear tires size: 8.25-15 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, standard forklifts & sideloaders available at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing under attractive conditions are always possible. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this DCE80-9. P.S.: Our master workshop specializes in repair, overhaul, refurbishing, and custom builds of forklifts from 8 tons upwards. We are also happy to sell your vehicle on commission. Sideshift, fork positioner, Heater, full cabin,

Kondisi: bekas, Tahun pembuatan: 2007, 3177 Optimizing Cross-Cut Saw Grecon Dimter OptiCut 200-1 Used, Year of manufacture: 2007 For cutting fixed lengths Processable wood dimensions: Infeed length min./max.: 3000 - 5000 mm Infeed width min./max.: 80 - 200 mm Infeed thickness min./max.: 38 - 80 mm Max. wood cross-section: 200 x 50 mm Finished wood length min./max.: 700 - 1000 mm Average number of cuts/board: 5 Suitable wood types: Softwood or hardwood Performance of the system: Feed speed max.: 180 m/min, infinitely variable Time per cut incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor before saw Length 1.5 m, coupled with the saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and integrated blow-off device for waste Kjdpfxeu Atmuo Aahsfa Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station with drive unit, without ejector Conveyor length approx. 1.5 m Machine already dismantled and in storage The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The feed table is present, only the rubber belt is missing. Sale on behalf of a customer, ex location Austria, excluding transport and installation Subject to error in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is made as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the following applies: “sold as seen” Pictures and videos are for illustration purposes and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Kondisi: baik (bekas), Gabbiani SA 300 Multirip Saw – Made in Italy TECHNICAL SPECIFICATIONS: cutting width: 300 mm Kfodpfshcwrkox Aahja motor power: 40 kW cutting height: 100 mm feed speed: stepless adjustment feed speed range: 8–56 m/min blade diameter: 300 mm spindle diameter: 50 mm bushing diameter: 70 mm 3 upper pressure rollers minimum workpiece length: 700 mm table dimensions: 1750 x 700 mm three rows of pawls height from base: 740 mm extraction port diameter: 2 x 150 mm overall dimensions (L/W/H): 270 / 170 / 160 cm

Kondisi: bekas, various types available Kfjdpjdc A Sbsfx Aahea

Kondisi: seperti baru (mesin pameran), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line consists of the following machines: VZ0200A) Infeed station with double loading unit “BARGSTEDT” Model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge-banding machine “HOMAG” Model KFL 525/8/A3/15 VZ0200C) Turnover station (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge-banding machine “HOMAG” Model KFL 526/10/A3/30 Ksdpfxsdt Rgve Aahjfa VZ0200E) Turnover station (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDL 510/25/12 VZ0200F) Sword brush “WANDRES” VZ0200G) Stacking station with double buffer unit “BARGSTEDT” Model TSP 410/D/25/12

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 23.000 h, Perlengkapan: penggerak semua roda,

Kondisi: sangat baik (bekas), Single-Sided Destacking Station - Upper traverse horizontally movable by 180° Ksdpfecggy Sox Aahefa - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Sliding front safety guard - Separate control cabinet and operator panel - External roller conveyor for stack of sheets from the destacking unit - External powered roller conveyor from destacking unit, also with belt for transferring sheets at 90° - Operating capacity (cycles/min): 12–15 - Sheet thickness (min/max) mm: 10–40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Kondisi: baru, Cutting range: Round 0°: 170 mm Square 0°: 150 x 150 mm Flat 0°: 150 x 190 mm Round 45°: 125 mm Square 45°: 95 x 120 mm Working height: 870 mm Cutting speeds: 40 / 80 m/min Saw blade: 2080 x 20 x 0.9 mm Coolant pump: 100 W Saw motor: 0.75 kW Connection: 400 V Dimensions (L x W x H), approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow pivotable up to 45° - Two band speeds for optimal adjustment to the workpiece - Ideal for cutting pipes, profile material and solid materials made of stainless steel, iron, etc. - Generously sized saw arm for low-vibration operation - Saw arm lowering by hydraulic cylinder - Low noise due to robust construction Kfodpfx Aaoilk H Tjhja - Automatic shut-off after cutting cycle via micro switch - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Coolant system with pump - Includes base frame - CE/IEC certified, German documentation and German service Scope of delivery: - Bi-metal saw band 2080 x 20 x 0.9 mm, 6/10 TPI - Band tension adjustable via pressure gauge - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic cut-off after cutting cycle - Base frame

Kondisi: siap digunakan (bekas), Forklift truck Manufacturer: Jumbo Model: J60 DC12 Diesel Year of manufacture: 1994 Load capacity: 6,000 kg Own weight: 9,260 kg Lifting height: 4,300 mm Kfodsvtwuajpfx Aahea Approx. 25,000 operating hours Sale due to switch to wheel loader All service and lubrication intervals have been carried out as documented in the inspection logbook! All filters (hydraulic, fuel, torque converter, air) have been replaced annually. Engine oil filter and oil changed every 250 operating hours. Only B0 diesel fuel used (no B7). Available immediately – fully functional Location: Austria, near St. Pölten

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1984, Pressing force: 3600 kN, Pressing stroke: 1.7 mm, Pressing capacity: 6120 J. Stroke: 60 mm, Installation height: 340 mm. Table clamping width/depth: 440 mm/525 mm, Tool holder width/depth: 440 mm/320 mm. Dimensions (X/Y/Z): 1300 mm/2000 mm/2230 mm, Weight: approx. 6300 kg. Kjdpsr A Eifefx Aahefa