Mesin frais tipe planer - kolom ganda

Kao Ming KMC-4000 SV-H

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.230 mm, jarak lintasan sumbu Y: 2.100 mm, jarak gerak sumbu Z: 850 mm, panjang pemakanan sumbu X: 4.230 mm, panjang umpan sumbu Y: 2.100 mm, panjang umpan sumbu Z: 850 mm, panjang total: 9.000 mm, panjang meja: 4.000 mm, lebar meja: 1.650 mm, lebar total: 3.500 mm, kecepatan spindel (maks.): 6.000 rpm, tinggi total: 3.500 mm, jarak antara penyangga: 2.300 mm, kecepatan rotasi (maks.): 6.000 rpm, berat keseluruhan: 30.000 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, 015001 Fsdpfx Aaoyac T Eogopd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, tinggi total: 2.797 mm, berat keseluruhan: 1.570 kg, This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating head and the VAST XXT TL3 sensor, enabling a scanning speed of up to 150 points/second. Ideal for precise measurements with a maximum workpiece weight of 730 kg. Consider the opportunity to purchase this ZEISS Contura 7/10/6 RDS CMM. Please contact us for further details on this unit. Additional Information: • Maximum workpiece size: approx. 1344 x 910 x 716 mm • Maximum workpiece weight: 730 kg • Table height: 850 mm • Equipped with vibration damping system Fedpfjx D Ngfjx Aagepd • Sensor system: • Articulating head: Tilt ±180°, rotation in 2.5° increments • Scanning speed: up to 150 points/second • Max. probe length: 150 mm • Max. probe assembly weight: 15 g • Min. probe tip diameter: 0.3 mm • Accuracy (according to ISO standard 10360): • Length measurement error (E₀): 1.7 + L/350 μm (at 18-22°C) • Scanning probe error (THP): 2.7 μm • Form measurement error (RONt): 1.7 μm • Repeatability (R₀): 1.2 μm • Control: ZEISS C99L • Software: ZEISS CALYPSO, ZEISS GEAR PRO, ZEISS HOLOS • Control mode: Motorized / CNC • Interface: Ethernet, USB • Performance: • Drive system: Motorized CNC • Travel speed (axes): 0-70 mm/s • Max. vector speed: 465 mm/s • Max. acceleration: 1.85 m/s² • Scanning speed: up to 125 mm/s • Utilities: • Power supply: 100-240V AC (±10%), 50-60 Hz • Max. power consumption: 800 VA • Typical power consumption: 200 W • Compressed air: 6-8 bar, pre-filtered, dry (ISO 8573-1 Class 4) • Air consumption: max. 120 Nl/min • Environmental conditions: • Operating temperature: 18°C-22°C • Relative humidity: 30-60% (non-condensing) • Compliance & Certifications: • In accordance with EU Machinery Directive 2006/42/EC • EMC Directive 2014/30/EU • Quality management: ISO 9001:2008 • Environmental management: ISO 14001:2004 • Accredited: ISO/IEC 17025:2005 Dimensions Machine depth: 1975 mm

Kondisi: baik (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 4.230 mm, jarak lintasan sumbu Y: 1.950 mm, jarak gerak sumbu Z: 750 mm, panjang meja: 4.000 mm, lebar meja: 1.250 mm, beban meja: 11.000 kg, CNC gantry milling machine KAO MING - KMC 4000 SV-H Double guideway and flat guide design Head changer for multi-sided machining of large components Automatic tool changer for horizontal and vertical milling heads, swiveling Distance table to spindle nose: 213–1093 mm Distance table to spindle center: 130–… mm Horizontal head indexing: 5 degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torque: 1018 Nm, ISO 50 Universal milling head type Huron X-axis travel: 4230 mm Y-axis travel: 1950 mm Z-axis travel: 750 mm Distance between columns: 1500 mm Table length: 4000 mm Table width: 1250 mm Table load capacity: 11,000 kg Feed X-axis: 12,000 mm/min Feed Y-axis: 15,000 mm/min Feed Z-axis: 12,000 mm/min Fedpfoxf E Twox Aagepd Tool holder: 50 ISO/BT/MK Spindle power: 26 kW Spindle speed: 4,400 rpm Tool changer: 30 positions Chip conveyor: Yes Coolant system: Yes Length: 10,100 mm Width: 4,500 mm Height: 4,250 mm Weight: 30,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Accordingly, these do not constitute representations or contractual terms. We recommend that you verify all key details.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, CNC Universal – Mesin Milling & Bor DECKEL MAHO DMU 80 P duoBlock Dengan kontrol lintasan MILL PLUS iT Tahun pembuatan: 2006 Perjalanan sumbu: X 800 Y 800 Z 800 mm Rentang kecepatan putar: 0 – 8.000 rpm tanpa tingkat (SK 50) Dengan perlengkapan berikut: Meja putar NC 900 mm x 700 mm area penjepitan (beban meja maks. 1,4 t) Kepala frais universal dengan sumbu B terkontrol Penukar alat universal dengan 40 slot majalah sebagai penangkap ganda (SK 50) Kabinet pelindung penuh dengan pintu geser dan lampu interior IKZ – 40 bar Konveyor serbuk Rotoclear Probe pengukur 3D Heidenhain TS 641 Mode operasi 3 + 4 Handwheel elektronik 50 buah dudukan alat SK 50 Fjdpjxn Aczsfx Aagepd 3 buah alas mesin yang dapat diatur ketinggiannya Perlengkapan transportasi Manual operasi

Kondisi: bekas, Tahun pembuatan: 2014, Workpiece length 100 mm Swing diameter 80 mm Number of spindles 2 Control FANUC 31i-B5 Workpiece weight 2.00 kg Center height 170 mm Grinding wheel diameter 100 mm Grinding wheel bore 32 mm Max. grinding wheel width 20 mm Max. circumferential speed 125 m/sec Fpjdpfx Aaevx Uvfjged Steady rest passage 45 - 60 mm Total power requirement 75.00 kW Machine weight approx. 25.00 t Space requirements approx. 5.00 x 3.50 x H3.50 m Camshaft grinding machine for cam blanks. Equipped with FANUC 31i-B5 control for non-circular grinding; loading gantry; CO2 extinguishing system; for CBN grinding wheel; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock variant 12 (two grinding spindles movable independently)

Kondisi: bekas, Tahun pembuatan: 2006, Travel X-axis: 1,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,200 mm C-axis: 360° x 0.001° A-axis: ° Control: SINUMERIK 840D Powerline SIEMENS Table size: 900 x 700 mm Milling spindle taper: HSK-A100 Spindle speeds - stepless: 12,000 rpm Tool magazine: Chain type, 180 positions Total power requirement: 85 kW Machine weight approx. 20.5 t Space requirements approx. 6.5 x 6.1 x 3.5 m 5-axis machining center with horizontal milling spindle arrangement Control: SIEMENS SINUMERIK 840D Powerline electronic handwheel NC rotary-swivel table Rotoclear window Probe interface prepared Blum laser tool measurement Vibration sensor Tool taper cleaning Fsdpjw E Nnnefx Aagepd Operating mode 4 IKZ (internal coolant supply) with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Cooling / heating unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, OKUMA Euro Center V50 Year of manufacture: 2002 Control system: OSP-U100L Travel paths: X-axis: 1,020 mm Y-axis: 510 mm Z-axis: 525 mm Table load capacity: 680 kg Clamping surface: 1,200 x 510 mm Tool changer: 20 magazine slots Chip conveyor included. Fodperfw Nhjfx Aagopd

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, Lini panel sandwich, atap 30,50,80,100 mm, dinding 50,80 mm, fasad 50,100 mm Fpjdpfx Aajxcinasgjd

Kondisi: bekas, Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07-16 1990, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 800 mm, Dijual mesin dalam kondisi baik seperti terlihat di gambar, diproduksi tahun 1990 dan dilengkapi dengan kontrol NCT 90. Mesin ini sangat jarang digunakan dan dijual karena kurang dimanfaatkan. Berat total mesin adalah 33 ton. Mesin sepenuhnya berfungsi. Pembongkaran dan pengiriman menjadi tanggung jawab pembeli. Fedpfow Sx Agjx Aagjpd

Kondisi: bekas, Tahun pembuatan: 2014, en001 Fpodpfx Ast Uw Avoagjd