Penggergajian lengkap (mobile)

Kara F2000 stationair

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely inspected prior to delivery ----- Technical Data Summary (additional accessories possibly included upon request) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g., for edge rounding from above > Laser alignment light for recognizing the saw section Pos. 2: Rounding Unit Horizontal Bottom ----- > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically coupled to crosscut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3500 mm > Electronic length stop Pos. 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 3,500 rpm > Max. tool diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st Profiling Spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm Dsdpfx Aevu Hghjdgekg > Motor power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash bar support rail from above in the area of vertical right profiling unit and profiling spindle. Pos. 6: Profiling/Milling Unit, Horizontal Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/Grooving Unit from Below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Kondisi: bekas, IDC000100 Komplettes Sägewerk - Valon Kone VK26M mit Ein- und Auslauf-Förderbändern - Rundumförderanlage - ARIVislanda KS12, 2 x 37 kW - ARI Schwartenabtrennsäge - ARI KL10 Trennsäge - Soderhamn Eriksson 519C, Besäumkreissäge mit Hackerköpfen - Bruks Hacker 1300 Vollständig mit Steuerungssystem und Mechanisierung. Dedpfx Ajvgdy Asdgjkg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 260 mm, tinggi penyerutan: 170 mm, diameter spindel: 40 mm, lebar perataan: 260 mm, tinggi kerja: 170 mm, daya motor pengumpan: 4.000 W, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jumlah spindel: 5, frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Profimat 23 E Working width: 260 mm Working height: 170 mm 5 spindles Spindle diameter: 40 mm Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW Djdpfovgnb Rsx Adgokg 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion table Driven roller at outfeed table Supplied with tooling.

Kondisi: baik (bekas), Tahun pembuatan: 2016, mebor-vr900-de Dkjdpfx Adexxgy Sjgsg

Kondisi: seperti baru (mesin pameran), Bandsaw blok Hauslhof CTR800Hydraulik, mesin demo, Diameter balok hingga 830 mm, Panjang keseluruhan 5800 mm, lebar 2300 mm, dengan sistem hidraulik untuk menjepit, mengunci, memutar, dan mengangkat balok total daya keluaran motor pada 100% ED: 10 kW Opsi: CTR800H-Ver3 CTR800H-KSD CTR800H-STH CTR800H-STH-V CTR-SSP CTR-11 CTR-VOR CTR-AMP Dkedpfx Adsvrvrnogeg CTR-EGL CTR-LG Automat CTR-Pumpe-EA

Kondisi: baik (bekas), Tahun pembuatan: 1998, Kufennagelmaschine P + K Palettennagelmaschine P+K SNM-III-24-1250 Intermediate drive with branding iron Dkjdpfx Adsuzh Anogeg Positioning table Gantry stacker Pallet size 600x800 - 1200x1400 mm

Kondisi: baru,

Kondisi: bekas, Tahun pembuatan: 1995, jam operasional: 1.589 h, nomor mesin/kendaraan: 558B, Perlengkapan: penggerak semua roda, - Beautiful Liebherr wheel loader in excellent condition, direct from the military (Swiss Army). Well maintained and serviced. - The 508 is a truly robustly built wheel loader, genuine military-grade quality. - It is not an oil dripper, leaves NO oil stains, and is in almost like-new condition. - The cab offers all-round glazing for excellent visibility! - The Liebherr L508 comes equipped with: quick coupler, 0.8 m³ bucket, pallet forks with side shift, additional hydraulic outlets for attachments, all-wheel drive, 40-degree articulated steering—extremely maneuverable with a small turning radius. - Tire size 12.5 R 20, off-road profile; tires are foam-filled (puncture-proof); snow chains included. Hydrostatic drive, maximum speed 25 km/h. Displacement 2,732 cm³, 4-cylinder inline Deutz BF4L1011 T engine with turbo, 24V electrical system. - TÜV inspection can be renewed on request for an additional fee!!! - All my vehicles can be viewed on my website. - Instead of running around from Flensburg to Berchtesgaden to look at various vehicles, you’ll find over 150 vehicles of the following types here: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Modell, Mowag, DB, etc.—and many with TÜV! - In addition, there is an unimaginable selection of spare parts and accessories. Djdpfxeqx S Alo Adgekg - Why settle for less? - Give me a call: 0049 (0)2248 Best regards, Philipp from Hanfbachtal.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 1.000 h, Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 160 mm, jenis penyesuaian ketinggian: hidrolik, Technische Beschreibung – Double Edger PAUL KME-750-L (Year of Manufacture 2012) The machine on offer is a double edger of the type PAUL KMEZ-750-L, manufactured in 2012. The machine is in good condition and ready for immediate use. It is ideally suited for precise edging of wood in industrial applications. Technical Data: • Machine No.: 12242770 • Year of manufacture: 2012 • Net weight: approx. 1,500 kg Drive & Electrical: • Connected load: 38 kW • Mains voltage: 400 V / 50 Hz • Rated current: 71 A • Fuse protection: 80 A • Control voltage: 24 V DC Dsdpfxjxpua Uj Adgekg Saw Technology: • Saw blade speed (min/max): 250 / 380 rpm • Bore diameter: 75 mm • Saw motor speed: 3,200 rpm Hydraulics & Pneumatics: • Hydraulic pressure: 60 bar • Pneumatic pressure: 6 bar Features: • Infeed rollers for easy material feeding • Integrated alignment sensors for automatic positioning • Batten bushing • Wedge splitter • Discharge table for orderly material removal This high-quality machine from PAUL is designed for continuous industrial woodworking operation and is equipped with practical additional features to ensure an efficient workflow.

Kondisi: baru, Tisch-Teigausrollmaschine Hersteller: Ital Form Abmessungen: 2350 x 870 x 620 mm Elektrische Leistung: 0,4 kW Spannung: 220 V, 50 Hz Dodpfx Adeuuhn Aegjkg Walzenabstand einstellbar: 1–35 mm Gewicht: 150 kg