Verzahnungsmaschinen Karl Klink RW 10 1963

Karl Klink

Kondisi: baik (bekas), Mesin Broaching / Mesin Tarik KARL KLINK RSI 2,5 EH -Tahun pembuatan: 1965 -Gaya tarik: 2500Kg / (25KN) Gjdsymz N Eopfx Aabsua -Kecepatan broaching: 1mm/menit hingga 9mm/menit (dapat diatur tanpa langkah) -Stroke maksimal: 800mm -Diameter benda kerja maks.: sekitar 250mm -Motor sekitar 3 KW -Unit pendingin -Indikator gaya tarik -Pembatas gaya tarik -Berbagai bushing penuntun (lihat gambar) -Kaki mesin Dimensi: PxLxT 1,1x0,7x2 meter / Berat 1600Kg Kesalahan dan kekeliruan dalam pengetikan dapat terjadi.

Tahun pembuatan: 1990, Kondisi: baik (bekas), Used side loader Kalmar, The machine has been well maintained. For further details, please refer to the pictures. Guedpfx Aaoh Et E Nobsa

Kondisi: baik (bekas), Tahun pembuatan: 1980, The machine was installed in a pit! - Traction force: max. 25,000 kg Godpfx Aoydlq Ijabeua - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total connected load: 45 kW - Machine weight: 5,500 kg

Kondisi: baik (bekas), Tahun pembuatan: 2004, - Traction force: max. 160 kN - Broaching stroke: max. 1000 mm - Tool feed stroke: max. 630 mm - Table width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW Gujdpfsydlqzsx Aaboa - Machine weight: 12,410 kg

Kondisi: hampir baru (bekas), Guillotine blok daging beku 2 buah pisau untuk pemotongan melintang 2 buah pisau untuk pemotongan memanjang Penampang blok: 520 x 300 mm Suhu proses: > -25 °C Gusdpfx Ajug Uqtjabsa Kapasitas maksimum: 5.000 kg/jam Perangkat pengangkat hidrolik Dimensi mesin dalam cm: Lebar: 110,0 Panjang: 240,0 Tinggi: 190,0 Daya terpasang: 6,0 kW Tegangan: 400 V, 50 Hz

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, 1 Godpfsxwcvmsx Aabsua

Tahun pembuatan: 1960, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 1733, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI10DT Machine no.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with indexing table (2 stations) Power supply: 380 V / 50 Hz Rated current: 35 A Gujdpfxjgyd S So Aabsa Connected load: 7.5 kW The machine has been fully overhauled and is therefore in excellent condition.

Tahun pembuatan: 1965, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broach stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Tool holder on pull bridge: Ø 105 mm cylindrical Pass-through bore in clamping table: Ø 125 mm Clamping surface (workpiece area): 440 mm x 440 mm Maximum workpiece diameter: approx. 800 mm (limited by the tool tray of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil capacity: hydraulics approx. 450 L / coolant approx. 100 L Machine footprint: (W x D x H) approx. 8,400 mm x 1,350 mm x 1,800 mm (excluding workspace) Power supply: 380 Volt, 50 Hz Connected load: 19 kW Equipment: • Mechanical-hydraulic control for broaching and return stroke • Integrated coolant/lubricant system • Manually operated tool traverse • The broaching slide with pull head holder is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal pull head for flat shanks up to max. approx. 40 mm width • Dividing attachment (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for manufacturing keyways with flat broaching tools as well as for profile broaching. Gujdpfxstuuvze Aabsa Due to the rigid machine bed and robust tool feeder, the machine is very well suited for heavy-duty profile broaching tools. Machine is used and in a condition appropriate for its age. The machine is available for inspection at our warehouse. The machine has just been added to our inventory; it has not yet been technically or visually refurbished. Profile broaching pull heads are available on request, depending on DIN standard, size, and stock condition.

Tahun pembuatan: 1960, Kondisi: bekas, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Gjdpfoui Sbsx Aabeua Broaching stations: 2 units The machine is equipped with a 2-station rotary indexing table. The machine has an automatic tool feeder and is designed for manual series production. Tool locking within the pulling bridge and in the tool feeder is carried out via a spring-actuated mechanism (pulling head according to DIN 1417).

Kondisi: bekas, Tahun pembuatan: 1990, maks.: gaya tarik 25.000 KG Godpfocm Eiwox Aabjua maks.: panjang alat 3520 mm maks.: kecepatan pemotongan 9,6 m/menit lebar buka lewat 520 mm Mesin ini telah memproses batang penghubung dan tutup batang penghubung. Mesin ini dirancang untuk produksi massal (output 400 buah/jam)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Bubut CNC Ernault Somua 1400x8000 Sistem CNC Fanuc 21i TB Maksimal turning: 1400 mm Panjang benda kerja maksimal: 8000 mm Maksimal turning di atas cross slide: 1100 mm Diameter spindle: 235 mm Berat maksimal benda kerja: 25.000 kg Daya motor: 75 kW Gusdpfx Aasyly Nbeboa Video mesin dalam kondisi menyala tersedia!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1966, berat keseluruhan: 7.000 kg, tegangan masuk: 380 V, panjang broaching: 1.500 mm, jumlah posisi broaching: 3, diameter benda kerja (maks.): 575 mm, tinggi total: 5.100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of construction: 1966 Weight: approx. 6,700 kg Machine No.: 2455 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 20,000 kg Broaching stroke: 1,500 mm Number of broaching stations: 3 Distance between broaching stations: 2 x 145 mm Chuck diameter for broach heads: 3 x Ø 85 mm Clear width between columns: max. 580 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely adjustable from 7 up to max. 25 m/min Machine dimensions (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. 5,100 mm in height with tool shuttle raised) Power supply / Connection rating: 380 Volt, 50 Hz / 14 kW Gsdpfxswql Rvs Aaboua Accessories / Special features: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-actuated locking in the drawbridge and in the shuttle. The machine features an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal use, ideally a foundation (pit) or alternatively a platform is required. Broach heads and pushers are available on request. The machine can be inspected under power in our warehouse. General information We always have a large selection of around 80 used broaching machines in stock, with pulling forces from 3,000 kg up to 63,000 kg, in both horizontal and vertical configurations. A significant number of the broaching machines in stock are available for live demonstration. If required, we can also offer you used equipment such as broach heads, pushers, broaching tools, and other specific accessories. Our company operates as a contract broaching service provider, and we can also assist you with technical inquiries based on 50 years of experience in broaching technology.

Tahun pembuatan: 1964, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2016, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between stations: 380 mm Draw head mounting diameter: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / Connected load: 380 Volt, 50 Hz Gedpfot Dv I Aox Aabsua Accessories / Special Equipment: The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tooling clamping system is designed for spring-actuated locking in the pull bridge and hydraulic-mechanical clamping in the feed unit. The machine was retrofitted electrically (Siemens S7 PLC) and mechanically in 2004. An integrated coolant system is included. Remarks: The machine is designed for series production use; for optimum utilization, a foundation (pit) is ideally required or optionally a raised platform. Draw heads and extractor needles are available upon request. The machine can be inspected at our warehouse.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, berat keseluruhan: 2.900 kg, daya: 8 kW (10,88 hp), tegangan masuk: 380 V, jumlah posisi broaching: 1, lebar total: 6.100 mm, tinggi total: 1.900 mm, Manufacturer: Karl Klink Gedpfjxtcz Ijx Aaboua Model: RW 10 Year of construction: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Pulling force: 10,000 kg Diameter of pulling head mount in crossbeam: 85 mm Broaching tool clamping: Universal pulling head for flat tangs up to 25 mm wide Pass-through bore in the clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by tool feeder machine body) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (without working area) Power supply / connected load: 380 Volt, 50 Hz / 8.0 kW Accessories / Special Features: • The machine features manual-hydraulic control for the broaching stroke movement • The machine is equipped with an integrated coolant and cutting fluid system • The machine has a simple oil drip tray mounted on the machine bed, without tool feeder Remarks: The machine is ideal for manufacturing keyways and profiles. On request, broaching tools, arbors, and pull heads can be supplied.

Tahun pembuatan: 1951, Kondisi: baik (bekas), nomor mesin/kendaraan: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2,750 kg Machine No.: 1133 General information / technical data: Hydraulic horizontal broaching machine in good operational condition Broaching stroke: 1,500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm wide Through bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Cutting speed: Hydraulically stepless adjustable from 2 m/min to 7 m/min Return speed: Hydraulically stepless adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (excluding working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / special features: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant/lubricant system • The machine has an oil and chip tray with a tool feeder carriage Guodpsdcdrpsfx Aabja Remarks: The machine is ideal for the production of keyways and profiles. The machine runs smoothly and is clean in the areas of the guides and the cylinder. Broaching tools and arbors can be supplied on request. The machine is available for inspection and demonstration under power in our warehouse.