Gergaji pita otomatis - horizontal

KASTO twinA5

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), de-20240622-01 Dsdpfxjxg Rhvj Aatekt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, diameter putar di atas sled silang: 1.600 mm, panjang pembubutan: 6.000 mm, diameter pembubutan: 1.300 mm, daya motor spindle: 100.000 W, tinggi total: 2.875 mm, panjang total: 9.550 mm, lebar total: 2.950 mm, berat benda kerja (maks.): 40.000 kg, d20240621-01 Dkodpfsymk E Ajx Aatst

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual Dkodewrm Dtspfx Aatot >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Table clamping surface: 765 x 400 mm Travels (X/Y/Z): 650/410/510 mm Spindle taper: BT 40 Min./max. distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8000 rpm Number of tool stations: 20 positions Feed rates: approx. 30 m/min Rapid traverse: approx. 30 m/min Electrical connection: 380 V, approx. 15 kVA Space requirement: 2300 x 2100 x 2650 mm Djdpfx Aetwy Dieatokt Weight: 4000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Winch incl. Maximum lifting capacity: 2 tons at 2.7 meters Maximum lifting capacity: 1 ton at 5.3 meters Operating hours: 270 h Dkodpoq N E U Ajfx Aatot Electric: yes

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Direkondisi ulang, garansi 12 bulan - Perangkat di atas rangka dasar - Suhu maksimum: 1300 °C - Volume ruang oven: 120 liter - Ukuran ruang oven: 500 x 500 x 500 mm (L x P x T) - Panel kontrol terpisah - Eurotherm 3504 - Pintu ayun paralel yang dapat dibuka saat panas - Celah di kerah oven kanan bawah (untuk retrofit sambungan gas CO2 dan N2 dalam kotak penggas, tidak termasuk!) - Daya: 15 KW - Koneksi: 400V 3/N/PE 50 Hz - Berat sendiri: 410 kg Dkjdpsyn Emqofx Aatst - Dokumentasi, deklarasi CE Oven, oven industri, oven anil, oven perlakuan panas, oven kamar,

Tahun pembuatan: 2015, Kondisi: baru, shaft furnace clear internal height: 1100 mm clear internal diameter: 790 mm Dksdpfjcdi D Dsx Aatjt external diameter: 1560 mm external height (without lid): 1480 mm external height (with lid): 2300 mm electric heating: 40 kW circulation fan: 2.2 kW three-phase connection: 400 V, 50 Hz maximum temperature: 750°C

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 32.870 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6030578, diameter pembubutan: 32 mm, kecepatan spindel (maks.): 8.000 rpm, Diameter batang (maks.): 32 mm, We offer for sale a Traub TNL26K automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy Dkedpevldx Ajfx Aatet The machine comes with a large number of both static and driven tool holders—the list is shown in the attached photo.

Kondisi: bekas, Tahun pembuatan: 2009, en_001 Djdpfst Rmdzox Aatskt

Kondisi: baru, Tahun pembuatan: 2023, Welding turntable, tank rotator with 6000 kg load capacity Digital display with foot pedal control Diameter range: 180 mm to 3500 mm Dkjdpfx Aek Adl Hoatet Drive roller diameter: 300 mm Dimensions: Length 1900 mm x Width 470 mm x Height 390 mm Stepless speed adjustment: 200 - 1800 mm/min.