Mesin bor umpan lurus

KDT Machinery KD-610NH

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Machining centre Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working area X: 2,500 mm Iijdpfxsh E Sghe Ab Iog Working area Y: 1,300 mm Working area Z: 4 - 80 mm Number of milling units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: swivels 90° X-axis feed rate: 130 m/min Y-axis feed rate: 80 m/min Z1-axis feed rate: 50 m/min Z2-axis feed rate: 27 m/min Spindle speed: 18,000 rpm Dismantled – immediately available

Kondisi: bekas, Tahun pembuatan: 2016, Angle plate saw with automatic pre-tensioning and double pusher system for optimized cutting Osi Plus numerical control Os Labeling labeling machine with onboard graphic labeling of the parts with illustrations Software for label print management Optiplanning cutting optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade protrusion: 95 mm Motorized rollers for side loading onto lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of throwaway panel (sacrificial panel) based on thickness specified in the machine data Low stack stop Automatic side loading. Includes: safety grids, double photo cell, push-button control panel, electrical pre-installation for the two motorized pre-roller conveyors, and reinforcement with 4 rollers instead of fork passages in the pre-roller conveyor Intermediate roller conveyor Side feed pre-roller conveyor, dimensions 3800 x 2200 mm, with motorized rollers (height from floor: 325 mm) Gravity conveyor for feeding longitudinal offcuts to corner systems, 4500 mm (total length: 7295 mm) 3000 mm extension of the gravity conveyor for also conveying cross-cut offcuts Long chute for manual transfer of cross-cut section to central gravity conveyor Air cushion outfeed table, 2050 x 850 mm, fitted with front wheels Air generator for up to 6 air cushion levels MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows the minimum panel length required for cross-cutting to be reduced from 1830 mm to 1220 mm. Automatic device for detecting saw spindle deflection in angular installations (longitudinal and transverse), consisting of a sensor that detects deflection directly on the saw shaft and a device that detects the blade revolutions directly at the chuck. Remote cycle start panel Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main saw blade, max. diameter mm, 15 KW Iodpfx Aeuc Idxeb Ijig Scoring blade, max. diameter mm, 2.2 KW Saw carriage speed 1-140 m/min – brushless motors Longitudinal pusher carriage speed 90 m/min Cross pusher carriage speed 135 m/min Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed grippers + 2 on the cross carriage, multi-pusher system) Cutting system for thin panels

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 114550, lebar kerja: 230 mm, tinggi penyerutan: 120 mm, jumlah spindel: 6, Planer and moulder Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control and the proven PowerLock quick-change system. Additionally, it features a mechanized return system for the planed workpieces, which is ideally suited for efficient production. Machine Equipment - 6 spindles - 1st spindle: 7.5 kW, 8,000 rpm - 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock - 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock - 4th spindle: 7.5 kW, 8,000 rpm, PowerLock - 5th spindle: 7.5 kW, 8,000 rpm, PowerLock - 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable: 2.5 m (including jointing fence) Spring-loaded top pressure rollers Side pressure pneumatic Frequency-controlled feed with brake Feed speed: 5 – 30 m/min Reduced feed roller gap between feed pendulums (400 mm) Additional feed rollers and shortened roller spacing Iisdpfx Ajx Sxfveb Ieg Durofer steel roller, self-cleaning Infeed roller before 1st bottom tool pneumatic Siemens/ Powercom control The machine is in very good, well-maintained condition, has been professionally operated and regularly serviced, and will remain in operation until 17.12.2026. Viewing of the running machine is possible by arrangement at any time. The price includes the tools for the 6 spindles. Dismantling and loading will be charged separately to the buyer. The technical description and machine layout can be found in the documents.

Kondisi: sangat baik (bekas), CNC MACHINING CENTER (POINT-TO-POINT) - 4 axes Gantry-type design Power Control system - woodWOP software Safety enclosure for the machining head Clamping table with 6 consoles Safety tread mats LASER system on the X-axis for console positioning and on the Y-axis for vacuum clamp positioning Automatic tool change system 2 disc-type tool changers - 8 tool positions at the rear + 8 tool positions on the side Maximum working area (X - Y - Z): 3130 x 1250 (1550) x 100 (150) mm 2 working zones - 1 x vacuum pump (capacity 70 m³/h) Chip conveyor Iiedpfxjyxn Tij Ab Ieg With separate electrical cabinet and controls Total connected load: 32 A WORKING UNITS (TOP): 12 independent vertical drilling spindles (High Speed 7500) 6 independent horizontal drilling spindles (4 X-axis + 2 Y-axis) Drilling head motor power: 2.3 kW 1 grooving saw unit, diameter 125 mm, N1 - swiveling 90° in X-Y direction 1 vertical main spindle (milling unit) HSK 63: 9 kW OPTIONAL: Drilling and milling unit with 4 horizontal spindles (cross spindle arrangement) BARCODE SCANNING SYSTEM PACKAGE PROFESSIONAL

Kondisi: bekas, nomor mesin/kendaraan: 008388, Arbeitsbereich Achse X: 3086 mm Arbeitsbereich Achse Y: 2185 mm Iodpoyngzvjfx Ab Isig Arbeitsebene: Nestingtisch Leistung Haupt-Spindel: 15 KW Anz. kontrollierte Achsen: 4 Achsen Anzahl Bohrspindeln: 18 Anzahl Werkzeugplätze: 20

Kondisi: bekas, Tahun pembuatan: 1988, Spitzenweite 1200 mm Drehzahl A) 70 - 380 U/min. Drehzahl B) 380 - 2000 U/min Gewicht 2,2 t Drechselbank +++++ Bitte beachten Sie, dass die Maschine im demontierten und verladebereiten Zustand ist. Aus diesem Grund ist eine Vorführung unter Strom oder die Ijdpfx Aek Sat Djb Ijig Fertigung eines Videos nicht möglich. Darüber hinaus enthält unsere Anzeige die aussagefähigsten Fotos von bestmöglicher Qualität. Die Zusendung weiterer Bilder ist leider nicht möglich. +++++

Kondisi: bekas, Tahun pembuatan: 2022, Mesin dalam kondisi sempurna di bengkel kecil yang bergerak di bidang pengerjaan kayu. Iisdpfx Aey S U Dujb Iog

Kondisi: baru, Tubend aluminium circular saw / under-table saw AC 550 Special features included in the price: - Pneumatic vertical and horizontal clamping by 4 clamping blocks - Infinitely variable saw blade feed - Minimum quantity lubrication - 3 m roller conveyor Description: - Saw blade diameter: 550 x 32 x 4 mm - Speed: 3,580 rpm Iiedpfjkckx Uox Ab Isg - Cutting range at 90° (rectangular): 260 x 200 mm - Cutting range at 90° (square): 155 x 155 mm - Cutting range at 45° (rectangular): 180 x 200 mm - Cutting range at 45° (square): 130 x 130 mm - Operating pressure: 6–8 bar - Operating voltage: 380 V - Total power requirement: 3 kW - Machine weight: approx. 250 kg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, panjang pemotongan (maks.): 8.000 mm, berat keseluruhan: 14.000 kg, panjang total: 13.000 mm, tahun perombakan terakhir: 2026, panjang mata gergaji pita: 9.045 mm, KONDISI SANGAT BAIK, SEPENUHNYA DIRENOVASI, bandsaw horizontal WRAVOR WRC 1250 AC Gergaji industri berkinerja tinggi dengan motor 55 kW — untuk pemotongan gelondongan Ø 1250 mm Tahun pembuatan: 2018 Spesifikasi teknis: • Motor utama: 55 kW • Kontrol: panel kontrol tetap dengan PLC Unitronics V-280 • Kemungkinan pengaturan manual ketebalan pemotongan Iisdpfxozd Uifj Ab Ijg • Rel (panjang): 12,5 m • Penjepit gelondongan: 5 x hidrolik • Roller hidrolik: 5 x • Sudut (90°): 5 x • Pemutar gelondongan standar: 4 x • Sandaran mekanik: 3 x • Pisau skor: 1 x • Sabuk nilon keluar untuk transportasi papan Gambar hanya bersifat informatif.

Tahun pembuatan: 2009, Kondisi: baik (bekas), • Fully automatic • Max. package height (mm): 650 • Min. package height (mm): 15 Iedpopu Anmofx Ab Ieig • Max. package width (mm): 1250 • Min. package length (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed table • Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5