Mesin penggiling silinder - di luar

KELLENBERGER R125-1000

Kondisi: bekas, Tahun pembuatan: 2007, Turning diameter: 140 mm Turning length: 615 mm Control: C200-4D Spindle bore: 65 mm Spindle speed: 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Turret slides: 1, 2, and 3 X-axis travel: 110 mm Z-axis travel: 360 mm Y-axis travel: 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Slide travel X-direction: 150 mm Slide travel Z-direction: 600 mm Iedpfewzynqjx Afisia Spindle speed: 5,000 rpm B-axis (correction axis): +/- 1° Tool turret - number of stations: 3 x 12 Tool holder DIN 69880 VDI 25 x 48 C-axis: 0.001° Total power requirement: 61 kW Machine weight approx.: 6.5 t Space requirement approx.: 9.75 x 3.10 x 2.85 m Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 for bars with lengths from 500 to 3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading device BREUNING ILS-REX-7208, year 2007

Tahun pembuatan: 2008, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, The system was used for grinding oil purification in carbide processing. Cooling unit: Eckert 3 filter towers with sludge bags Filtration capacity: 80–100 l/min Filtration fineness: 3–5 µm Ijdpfx Afelczcwjioia In the description, the system is specified with a sludge drum; technical data are similar. Original manual in paper form available. Videos available upon request.

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Isdpfx Afjuxft Eeieia Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivel range: ±10° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (supported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Refurbished as per Kellenberger guidelines, including new, modern, and future-proof control system. Photo shows already delivered machine with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are practically identical to those of the original controller, so no retraining is required. - Diagnostic function showing PLC messages and digital I/Os. - Dressing function can be expanded or modified as per customer requirements. - Workpiece spindle orientated stop available on request. - New max. infeed amount 40 mm, can be further increased on request. - 2-axis digital readout. x-axis resolution 0.5 µm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increasing centre height to max. 225 mm - Variable speed control for grinding spindle Included: - Operator tools - Drawbar for chuck Further accessories on request. The machine features an electronically controlled infeed system on the x-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Please note: This machine tool does not currently comply with the essential safety and protection requirements as specified in BetrSichV 2015. An increase in the required minimum safety objective must be determined via a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2016, Technical details: Iodpfeudf Evjx Afioia Weight: 22 t

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 12.000 kg, panjang umpan sumbu Y: 300 mm, panjang umpan sumbu Z: 1.080 mm, diameter meja: 1.200 mm, kecepatan pemakanan sumbu X: 3 m/menit, laju pemakanan gandar Y: 500 m/menit, laju pemakanan sumbu Z: 3 m/menit, arus masuk: 195 A, diameter benda kerja (maks.): 1.600 mm, panjang spindle milling: 450 mm, mesin bor meja: 400 mm, kecepatan spindel (min.): 250 rpm, berat keseluruhan: 51.000 kg, daya: 115 kW (156,36 hp), Perlengkapan: dokumentasi / manual, Liebherr high-performance gear hobbing machine LC1502 in good condition Liebherr LH90 V4 control, Bosch Rexroth drives Comprehensive accessories such as BHG, cooling unit for lubrication and coolant, extraction system, arbor mandrels, various software packages/limit value extensions, and complete documentation. Iedpfx Ajwqm A Tsfieia We can also provide support with installation and commissioning up to production on a time and material basis!

Kondisi: sangat baik (bekas), Perfekt erhaltener sechsspindliger INDEX MS 25 Mehrspindel-Drehautomat mit jeweils sechs Quer- und Längsführungen für Werkzeuge. Iisdpfxjqhkuko Afiea Der Preis ist verhandelbar und richtet sich nach dem gewählten Zusatzequipment: Spannzangen, Werkzeuge, Späneförderer usw. Die Maschine befindet sich noch im Produktionseinsatz. Besichtigung nach Absprache möglich.

Kondisi: baik (bekas), Tahun pembuatan: 2000, CNC flat and profile grinding machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Electromagnetic chuck with continuous transverse pole division Isdpfx Aofrbckefieia 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine tray. Complete machine documentation available.

Kondisi: bekas, Tahun pembuatan: 1976, de-to-hu-it-lt-lv-nb-nl-pl Iiedsyh Rmtopfx Afiea

Kondisi: baik (bekas), Tahun pembuatan: 2012, Suku cadang yang ditunjukkan dengan tangan tidak termasuk. X1020mm Y610mm Z610mm. 12.000 rpm, 25 kW, 160 Nm. Unit kontrol: HEIDENHAIN iTNC 530. Sumbu keempat akan dikirim tanpa suku cadang yang ditunjukkan dengan tangan. Ijdpfx Aox Awzbsfieia

Kondisi: bekas, Tahun pembuatan: 1992, kecepatan spindel (min.): 7.500 rpm, kecepatan spindel (maks.): 24.000 rpm, 4 motor-driven grinding spindles (liquid-cooled, sealing air / oil mist lubrication) including the REFU HF converter, suitable for example for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032, 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter / inverter for supplying the motor spindles GMN tool spindle motor grinding spindle The spindles are fully functional, sold without warranty – year of manufacture approx. 1992 A collection of various grinding spindle shafts / arbor mandrels for grinding wheels is available for these grinding spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. Iiodjl Tn Afopfx Afija We sell exclusively to countries within the European Community.