Sistem pengukuran

Keyence IM-8030T

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), de-01 Bwedpfx Aox I Rpxebvju

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Connected load: 18 kW, but the unit was completely overhauled in 2017. An inspection is possible. Bodpfx Abon Htktovswu

Kondisi: sangat baik (bekas), de-001 Bsdpfxoylbhxo Abvewu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, tinggi total: 2.222 mm, lebar total: 2.204 mm, berat keseluruhan: 10.600 kg, panjang produk (maks.): 3.290 mm, This 8-axis Miyano ABX64 YY2 was manufactured in 2014. It offers a maximum working length of 125 mm and a maximum turning diameter of Ø 165 mm. The machine is equipped with two turrets, each with 12 positions, and rapid traverse speeds of up to 30 m/min. If you are looking for a high-quality CNC lathe, you should consider the Miyano ABX64 YY2 horizontal turning center we are offering for sale. Contact us for further details. • Number of spindles: 2 • Spindle speed: SP1: 40 - 4000 rpm, SP2: 50 - 5000 rpm • Draw tube inner diameter: SP1: Ø 65.5 mm, SP2: Ø 52 mm • Chucking system: Hydraulic cylinder (SP1 / SP2) • Collet chuck type: SP1: S-collet system H-S26 / DIN185E, SP2: S-collet system H-S22 / DIN177E • Power chuck: SP1: 6" hydrodynamic chuck, SP2: 6" hydrodynamic chuck • Number of turrets: 2 Bjdpfx Aboym T Efjvswu • Turret stations: 12 positions each • Tool shank size: □ 20 mm • Internal tool bore: Ø 25 mm / Ø 40 mm • Indexing time: 0.25 sec per position • Turret head HD1: X1: 16 m/min, Z1: 30 m/min, Y1: 12 m/min • Turret HD2: X2: 20 m/min, Z2: 30 m/min, Y1: 12 m/min • Sub spindle axis: Zs: 30 m/min • Number of driven tools (HD1, HD2, HD3): 12 (max. 24) • Maximum spindle speed: 6000 rpm • Machining capacity: Drilling: max. Ø 20 mm, Tapping: max. M14 × 2, End milling: max. Ø 16 mm • Hydraulic tank capacity: 10 l • Lubrication tank capacity: 4 l • Coolant tank capacity: 400 l • Voltage: AC 200/220 V ± 10% • Frequency: 50/60 Hz ± 1 Hz • Power consumption: 48 kVA • Air supply: 5 bar (5 kgf/cm²)

Kondisi: siap digunakan (bekas), Angeboten wird eine gebrauchte hochpräzise Studer S35 CNC-Rundschleifmaschine. Spitzenweite: 1000mm, Spitzenhöhe: 175mm, Umlaufdurchmesser max. ca. 350mm, Werkstückgewicht: ca. 80kg, Auflösung: Messsysteme Glasmaßstäbe Bereich 0,0001mm 0,1µm. Besichtigung nach Absprache möglich. Bwedpfx Asykuucsbvou

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 24.140 h, berat keseluruhan: 10.000 kg, produsen pengendali: FANUC, model controller: 31i-NT-SmartX, jumlah sumbu: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017 and features a bar capacity of up to 65 mm, as well as two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. It comes equipped with a Samsys bar feeder, an Absolent extraction system, and a wide range of automated features, including through-spindle coolant supply, parts catcher, and automatic tool presetting devices. Seize the opportunity to purchase this Nakamura NTJ100 turn-mill center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: Han-Bei probe for automatic workpiece measurement (infrared or radio) for both left and right spindle • Left and right, with automatic swivel and 2x 4 measuring directions for fast, precise tool presetting via NC function • Operating hours: 43,399h • Coolant system: Coolant through spindle (CTS); coolant float switch for machine stop at low level; additional coolant flush through both spindles (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck air blow device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connecting stub Ø 150 mm • Robot/automation preparation: Pneumatic flap for robot handling on the top of the door, opening approx. 400 x 400 mm • Handwheel for manual positioning of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Three-color signal light Bjdpfxjx D Iuzs Abvowu The Samsys bar loader with 1.5 m loading length has the following dimensions: Length: 225 cm + 43 cm intermediate guide; Width: 120 cm (including loading ramp and control panel); Height: 145 cm or 180 cm with open hatch The machine was mainly used for machining aluminum (95%). Additional equipment: • Samsys bar feeder, including extension • Absolent extraction unit • Hinged belt chip conveyor with interface, interval control, and alarm monitoring

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 15 h, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), tegangan masuk: 240 V, rentang pengukuran sumbu X: 580 mm, rentang pengukuran sumbu Y: 300 mm, rentang pengukuran sumbu Z: 200 mm, lebar total: 579 mm, panjang total: 916 mm, tinggi total: 844 mm, berat keseluruhan: 45 kg, berat benda kerja (maks.): 50 kg, Sistem pengukuran 3D VL-770 dengan meja putar bermotor Ø500mm - Kepala pengukur VL-770 Bwsdpfjvzqp Hsx Abveu - Unit kontrol VL-700 - Meja objek 500mm VL-750 - Area pengukuran dengan kombinasi hingga Ø500mm atau 580x300mm - Penutup (penggelapan) - Paket perangkat lunak (bahasa Jerman) - Plat kalibrasi - Modul perangkat lunak untuk toleransi bentuk dan posisi - Modul perangkat lunak untuk konversi CAD Deskripsi lengkap dalam brosur

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, X-axis: +/-100 mm, measuring range: 600 x 300 x 200 mm, max. workpiece weight: 25 kg, the machine is in like-new condition, on-site inspection is possible. Bwjdpfx Aberuaaaovsu

Tahun pembuatan: 2021, Kondisi: hampir baru (bekas), Mobile 3D coordinate measuring device Keyence WM-3000 Device in as-new condition, being sold due to purchase of a new machine Technical specifications available from the manufacturer Bsdpomrrb Sefx Abvjwu Inspection possible in 47877 Willich

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, For sale is a SMD pick-and-place machine from Fritsch GmbH, model placeALL 610, equipped with a placement head featuring laser centering. The machine is fully operational and ready for immediate use after programming. Technical specifications: Type: placeALL 610 Year of manufacture: 2014 Placement capacity: 600 components/hour Chips: From 0402 chips up to 22x22 mm (optionally up to 32x32 mm) Laser centering: Non-contact "on-the-fly" Slots: 108 Feed positions: 208 for 8 mm tapes Placement table: 520x370 mm Placement area: 620x450 mm Tooling: 5 x standard Additional features: - Camera System: Vision System II + lighting - Dispensing system: CD-05 placement tool & blow-off function - Frame adaptation; access for robotic arm from the left - Universal CAD conversion - Barcode reader for ID barcode - Camera attachment for LM-, SM-, and FP systems - and much more Feeders: - 2 pcs feeder racks with 16 slots each for tape/tubeFEEDER, front and rear side PA610 - 1 pc feeder rack with 22 slots for tape/tubeFEEDER, left and right side PA610/L - 20 pcs tapeFEEDER 8mm (max. tape thickness: 1.1mm; max. tape height: 6.0mm; max. tape width: 8.3mm; max. reel width: 17.5mm; slots: 1) - Barcode compatible - 4 pcs tapeFEEDER 12mm (max. tape thickness: 1.4mm; max. tape height: 6.0mm; max. tape width: 12.3mm; max. reel width: 17.5mm; slots: 1) - Barcode compatible - 2 pcs tapeFEEDER 16mm (max. tape thickness: 1.4mm; max. tape height: 13.0mm; max. tape width: 16.3mm; max. reel width: 30.5mm; slots: 2) - Barcode compatible, including feeder extension 908.120.007 - 1 pc tapeFEEDER 24mm (max. tape thickness: 1.4mm; max. tape height: 13.0mm; max. tape width: 24.3mm; max. reel width: 30.5mm; slots: 2) - Barcode compatible, including feeder extension 908.120.007 - 1 pc vibration tubeFEEDER (handles up to 10*SO sticks; slots: 5) - Barcode compatible - 1 pc feeder setup station with software for setup and complete component creation, connection to PC via RS232 (PC not included) - 1 special PA wire feeder for supplying and cutting wire pins, including placement tool - 5 pcs tape feeder TF 943, cassette for 8 mm reels, width 11 mm Transport and loading can be organised Europe-wide upon request and at extra cost. Prices plus VAT. Inspection is possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery trading PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website. Bedpjwy U Nmefx Abvjwu