Mesin pembengkok profil dengan umpan hidraulik

KK-Industries Profilbiegemaschine Sahinler HPK 180 DP (2 Speed)

Kondisi: baru, Tahun pembuatan: 2023, diameter poros: 80 mm, Profile bending machine AHB 80 - Electro-hydraulic ring/profile bending machine - Hydraulic adjustment of lower rolls - Hydraulic adjustment of side rolls - Individually adjustable lower shafts - Three driven rolls - Segmented roll segments - Digital display - Touchscreen - Hardened shafts and standard rolls - Hydraulically adjustable lateral straighteners Ndjdpfsqxcy Hox Ab Eed - Can be used horizontally and vertically - Mobile control panel - CE marking / Declaration of Conformity Shaft diameter 80 mm, hardened Fully hydraulic Motor 400 Volt 50 Hz 3 phase Weight approx. 1,700 kg Dimensions 1340 x 1390 x 1640 mm

Kondisi: baru, Pressure: 28 t Stroke: 180 mm Table size: 300 x 550 mm Piston diameter: 130 mm Working speed min.: 2 m/s Working speed max.: 9.8 m/s Return speed: 20 mm/s Maximum pressure: 200 bar Machine weight approx.: 0.65 t Total power requirement: 4 kW Nedpfxjgvkmrj Ab Eedd Space requirement approx.: 1.15 x 0.75 x 1.1 m • The Profi Press horizontal bending and straightening press is a versatile hydraulic press, specifically designed for carrying out bending, profiling, and straightening operations. The machine's applications are varied and depend on the accessories installed on the worktable, tool holder, and in the holes and pin holes. • The HB-28 model is equipped with an angle scale on the worktable for light bending measurements. The press can also be supplied with tools (such as block punches) that can be mounted on the tool holder, as well as tools installable in the holes and pin holes to perform a variety of operations. • The hydraulic system can be adjusted using the pressure and flow control valves, which influence the press force and the speed of the press. The press is equipped with a built-in pressure gauge. • The control panel is used to operate and display the piston stroke, and to select between manual or automatic operation. The HB-28 model is also fitted with an integrated memory for up to 4 different programs. • Operation is via electric foot pedals.

Kondisi: baru, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Ndedpjfg E H Tefx Ab Eed Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Functionality in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The saw bow lowers by its own weight, is counterbalanced by a spring, and the descent is regulated by a hydraulic brake cylinder. Once the cut is completed, the saw bow is manually raised to the required position for material feeding. Electrical control panel (with labeled cable connections, indicator light for operational readiness, main safety switch with provision for padlock, switch or speed selector, emergency stop, thermomagnetic protection, 24-volt low voltage system). Electronic tension converter with display for bandsaw blade tension. Manual vice with quick-locking device. Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory). Electric coolant pump for cooling and lubricating the saw blade. Chip cleaning brush. Adjustable precision stops for repeating cuts of identical length. Machine is designed for pallet truck transport. Bimetal bandsaw blade for solid and profile material. Tools and operating instructions.

Kondisi: baru, Tahun pembuatan: 2020, Die elektrische Bogenherstellungsmaschine ist eine Vorrichtung zum Formen von Bögen aus runden und rechteckigen Rohren mit unterschiedlichen Durchmessern. Die Bogenherstellungsmaschine EEM-200plus ist die verbesserte Version der EEM-200-Maschine. Sie verfügt über ein zusätzliches viertes unteres Presswerkzeug, das das Rohr während des Biegens von allen vier Seiten presst und so eine höhere Bogenqualität gewährleistet. Unsere Maschine kann sowohl mit runden als auch mit rechteckigen Rohren eingesetzt werden. Ndsdpjf Epznsfx Ab Ejd Die Bogenherstellungsmaschine EEM-200plus ermöglicht die Bearbeitung von Rohren mit Durchmessern von 80 bis 200 mm. Wichtiger Hinweis: Der Innendurchmesser des zu biegenden Rohres muss mindestens 1 mm größer sein als die Biegematrix der Maschine! Die Rohrnaht muss geschlossen oder verschweißt sein, um ein Öffnen des Rohrs während des Biegens zu vermeiden! Die Bogenherstellungsmaschine EEM-200 arbeitet elektrisch und benötigt daher kein Luft- oder Hydrauliksystem. Der Stromverbrauch beträgt 1,5 kW/Stunde. Die erforderliche Betriebsspannung ist 380 V. Der Einsatzbereich liegt in einem Temperaturbereich von -5 bis +45 Grad Celsius. Die Maschine eignet sich für das Biegen von Rohren mit einer maximalen Wandstärke von 0,8 mm. Das Biegen der Bögen erfolgt bei der EEM-200plus durch spezielle Presswerkzeuge. Für jeden zu biegenden Rohrdurchmesser wird ein entsprechendes Werkzeugsatz benötigt. Um zusätzliche Durchmesser biegen zu können, müssen zusätzliche Presswerkzeuge erworben werden. Zum Lieferumfang der Maschine gehören vier Presswerkzeugsätze, sodass Sie vier verschiedene Rohrdurchmesser im Bereich von 80 bis 200 mm (frei wählbar) biegen können.

Kondisi: baru, Tahun pembuatan: 2024, Ring bending machine Zopf - incl. digital display - three driven rolls with smooth surface Ndedpfx Absdktnve Eod - manual adjustment of the upper roll - Working position horizontal and vertical - Model ZB 30/3 MD - Shafts supported by tapered roller bearings - Use of replaceable slide rails on the guide carriage - Roller diameter 76-86 mm - Shaft diameter 20 mm - Shaft speed 11 rpm - Drive motor 0.18 kW - Bending capacity: round tube 30 mm - Flat bar 25x6 mm - Angle iron 20x20x4 mm - Weight 80 kg

Kondisi: baru, Tahun pembuatan: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of the compact and mobile horizontal bending machine focused specifically on producing dimensionally accurate spirals, such as handrails for spiral staircases. This represents the gold standard in bending, as two mutually dependent variables (radius and pitch) must combine in a single process to form a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and control via measuring devices with subsequent correction of bending values ensures perfectly accurate results. With minimal and simple input into the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new powerful drive concept allows variable adjustment of the bending speed and requires only a standard 230 V (single-phase AC connection). Choose between hardened steel tools and surface-friendly hard plastic tools. For optimum feed even with tight bending radii, all three bending shafts are powered. This drive system also proves itself in everyday heavy-duty use for flat work and for bending pipes and profiles. Customers of the bending systems 4800, 5000, and 6000 can purchase the roll bending unit separately without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 bending systems via the bending shaft. Here, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/lower rails for spiral staircases • Large-radius pipe and profile bends • General metal fabrication TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm with Ø 42.4 mm • Right and left bending direction • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • 230 V site-compatible connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller for stabilization • Lift roller for producing controlled pitch • MGR – Measuring device for determining the correct radius Nodpfx Aong A R Ssb Esdd • MGV – Measuring device for determining the correct pitch via twist measurement • MPW – PC calculation program for determining accurate bending values • RB4303 – Universal bending tool for profiles up to 60 mm height • Tools for custom profiles OUR ON-SITE SERVICE FOR YOU: • Test production demo available in our in-house showroom • Consultation and information session at your location • Leasing/financing options, advice and processing • Service contracts, on-site maintenance

Kondisi: siap digunakan (bekas), tinggi total: 3.020 mm, panjang total: 3.300 mm, lebar total: 5.100 mm, kedalaman tenggorokan: 1.060 mm, lintzaag-dubbelkoloms-vertaling-en Nodsv Sfp Aopfx Ab Ejdd

Kondisi: baik (bekas), Tahun pembuatan: 2017, The machine is as good as new. Ndsdpfjtddwujx Ab Eod

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, - GEBRAUCHT - ROHRBIEGEMASCHINE ACHEN: 3 MAX. ROHRDURCHMESSER: 30x2 mm ARBEITSLÄNGE: 3000 mm Ndsdjvhc Uujpfx Ab Eed X-ACHSEN-POSITIONIERGESCHWINDIGKEIT: 900 mm/s Y-ACHSEN-BIEGEGESCHWINDIGKEIT: 200 °/s Z-ACHSEN-DREHGESCHWINDIGKEIT: 360 °/s MAX. BIEGERADIUS: 20 BIS 170 mm STEUERUNG: DNC800

Kondisi: baru, Dimensions (LxWxH): 1,630 x 700 x 1,200 mm Noded Eqqqjpfx Ab Eodd Approx. weight: 480 kg Total power requirement: 1.1 kW Bending: 2 Sheet thickness: 3 mm Sheet length: 1050 mm Technical Data Sheet Rolling Machine Roller diameter: 90 mm Rolling speed: 6 m/min • Asymmetrical roller arrangement • 2 rollers driven by brake motor • Rear roller adjustment via handwheel • Swing-out upper roller • Conical rolling device • Double foot switch for forward/reverse operation • Bottom and rear rollers with wire grooves • Operating manual in GERMAN EXTRA: Hardened rollers EURO 900,-- For catalogue, please see the following link: