Beli Kk-Industries Profilbiegemaschine Sahinler Hpk 180 Dp (2 Speed) bekas (101.542)

Kondisi: baru, Shaft diameter: 580 mm Working speed: 3-6 m/min Motor power: 30 kW Length: 2760 mm Width: 2310 mm Height: 2680 mm Weight approx.: 14,400 kg Rcjdpfsh Alh Hex Abyjb Technical Data: - Welded steel frame construction - 3 driven rolls - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - Lateral angle guide rolls - Brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit 10Screen EURO 11,500,--

Kondisi: baru, Shaft diameter: 480 mm Working speed: 3-6 Motor power: 22 kW Length: 2500 mm Width: 2200 mm Height: 2300 mm Weight approx.: 9300 kg Technical data: - Welded steel frame construction Rsdpfx Abjh Alh Rjyocb - 3 driven rollers - Hardened and ground shafts made from high-strength special steel - Rollers are hardened and ground - Horizontal working position - Hardened standard rollers - Mobile control panel - Lateral angle guide rollers - Equipped with brake motor for precision bending - Digital displays (2 units) Options: - DIGITAL INDICATOR STANDARD - NC control unit, 10" screen, EUR 11,500,--

Kondisi: baru, Shaft diameter: 580 mm Working speed: 2–5 m/min Motor power: 30 kW Length: 3,000 mm Width: 2,310 mm Height: 3,100 mm Approx. weight: 16,500 kg Technical specifications: - Welded steel frame construction - 3 powered rollers - Hardened and ground shafts made from high-tensile special steel - Rollers are hardened and ground - Horizontal working position - Hardened standard rollers - Mobile control panel - Lateral angle guide rollers Rodpjh Alh Usfx Abyjcb - Brake motor equipped for precision bending - Digital displays (2 units) Options: - STANDARD digital readout - NC unit with 10" screen, EUR 11,500,--

Kondisi: baru, Shaft diameter: 60 mm Upper roll diameter: 215 mm Lower roll diameter: 215 mm High-performance hydraulics: 16 Working speed: 4 Motor power: 1.5 kW Length: 1000 mm Width: 1400 mm Height: 1650 mm Approx. weight: 950 kg Technical Specifications: - Welded steel frame - All three rolls are motor-driven - Hardened shafts made from special steel - Top roll hydraulically adjustable - Horizontal and vertical working positions - Standard rollers - Guide rollers - Brake motor for precision bending - Portable control panel Rcjdpfx Aod Ab H Robyeb Options: - Digital display EUR 700,-- - NC control unit EUR 7,000-- - Angular side guide rollers EUR 1,400,-- HPK 50 File Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN 80 UPN 30 800 400 Optional Rolls *15 UPN 80 UPN 30 1200 600 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities specified for sheet steel with 260 N/mm² yield strength

Kondisi: baru, Shaft diameter: 50 mmUpper roll diameter: 152 mmLower roll diameter: 162 mmHigh-performance hydraulics: 8Working speed: 4.5 m/minMotor power: 1.1 kWLength: 810 mmWidth: 950 mmHeight: 1500 mmWeight approx.: 500 kg Technical Specifications: - Welded steel frame - All 3 rollers powered - Hardened shafts made from special steel - Upper roll hydraulically adjustable - Horizontal and vertical working positions - Standard rolls - Guide rolls - Braked motor for precision bending - Portable control panel Options: - Digital display: EUR 700 - NC control unit: EUR 7,000 - Lateral angle guide rolls: EUR 1,400 HPK 50 Sheet Data Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard rolls 2 100x15 50x10 600 300 Standard rolls 3 35x35 15x15 600 300 Standard rolls 4 Ø35 Ø20 600 300 Optional rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional rolls 7 70x30x3 30x15x2 1500 400 Optional rolls 8 50x3 20x2 1600 400 Optional rolls 9 50x50x6 30x30x3 600 400 Optional rolls Rcodpfx Ajd Ab H Sobysb 10 50x50x6 30x30x3 900 600 Optional rolls 11 60x7 30x4 600 400 Standard rolls 12 60x7 30x4 700 400 Standard rolls 13 60x7 30x4 700 400 Standard rolls 14 UPN 80 UPN 30 800 400 Optional rolls* 15 UPN 80 UPN 30 1200 600 Standard rolls* * Special washers (spacers) may be required / Only with special beam bending attachment • Capacities indicated for plate with 260 N/mm² yield strength

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2013, Sahinler HPK 200 Hydraulische Profil- und Rohrbiegemaschine Wellen- und Achsendurchmesser: 200 mm Werkzeug- und Walzendurchmesser: 900 mm Arbeitsgeschwindigkeit: 2–5 m/min Motorleistung: 30 kW Biegeleistung x15x4 273x5,6 / 10.000 mm Maximaler Walzendurchmesser: 9"x6,3 / 4.000 mm Walzendurchmesser oben: 650 mm Rjdpsw D Uqxefx Abyecb Walzenkapazität Profil - 3 200x200x18 / 5.000 mm Wellen-Durchmesser: 200 mm Obere Walze x15 mit Vorbiegen mind. 120x120 / 3.000 mm Spannung: 3x400 V Arbeitsgeschwindigkeit: 2–5 m/min Maximale Leistungsaufnahme: 30.000 W Höhe: 2.300 mm Länge: 2.400 mm Breite: 3.400 mm Gewicht: 15.000 kg

Kondisi: baru, Dimensions (LxWxH): 0.80 x 0.85 x 1.20 m Approx. weight: 0.610 t Total power requirement: 4 kW Sheet thickness: 6 mm Details: Rsdpfx Abod Ab Icsyecb - Hydraulic drive, 6 mm, 90° fixed - Blade length: 200 mm - Notching angle: 90°

Kondisi: baru, Dimensions (LxWxH): 1.10 x 1.15 x 1.40 m Approx. weight: 1,150 kg Total power requirement: 4 kW Sheet thickness: 6 mm Details: - Hydraulic drive - Blade length: 200 mm - Notching angle adjustable from 60° to 140° at 6 mm Rcsdpfxjd Ab Ids Abyob - Notching angle adjustable from 30° to 59° at 4 mm

Kondisi: baru, Laser power: 2Load capacity: 1250x-axis travel: 2020y-axis travel: 4050z-axis travel: 350Positioning accuracy: 0.05Repeatability: 0.03Table changeover time: approx. 10Cooling unit: water chillerWeight approx.: 11,500Dimensions (LxWxH): 4400 x 10,000 x 2120 The FLC series is a fast, precise, reliable, and cost-efficient fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper-class standards. It can handle laser power up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used in the manufacturing of agricultural machinery, textile machinery, food machinery, construction equipment, elevators, and other large machines and installations. It is the ideal cutting machine for anyone looking to outsource work. It allows for easy blowing, cutting, pausing, simulation calibration, etc., via wireless remote control. Standard nesting software quickly and automatically readies parts for cutting with no operator intervention. It also features a flycut function. As it is equipped with a dual exchange table, you can continue cutting without downtime. All of our machines are manufactured to European standards and are CE certified. Our FLC machine types are equipped with nozzle cleaning and a dual-camera system. Selectable cutting table sizes: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus and an active anti-collision function, as well as an auto-view function that detects obstacles and moves accordingly. Cutting heads have automatic cooling. The bridges used in all our machines are single-piece welded aluminum alloy constructions. This one-piece design ensures rigidity and prevents the bridge from losing its shape or deforming under impact, overlap, or load. Additionally, thanks to their weight—three times lighter compared to steel profile bridges—we achieve high speeds and accelerations with lower motor power. Accessories included: - Water chiller - Switch cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Flying cut - Nozzle and lens starter kit - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote query - Automatic lubrication system - Dual camera SPECIFICATIONS VALUE Working area 2000 x 4000 mm Load capacity 1200 kg XY axes travel 2020 x 4050 mm Z axis travel 350 mm XYZ axis guide 4-point ball cage XY axis drive system Rack and pinion Z axis drive system Ball screw XY axis speed 100 m/min Z axis speed 30 m/min XY positioning accuracy 0.05 mm XY repeatability 0.03 mm Table changeover time 10 s Laser source Raycus / Hans / JPT Laser source output 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system Fscut Rcsdperuwbxjfx Abyob Laser cutting head Raytools / BOCI / WSX Supported gases Air/Oxygen/Nitrogen

Kondisi: baru, Working area: 2000 x 6000 mm Load capacity: 1450 kg X-travel: 2020 mm Y-travel: 6050 mm Laser power: 2 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Weight approx.: 11,500 kg Dimensions (LxWxH): 10,000 x 4,400 x 2,120 mm The FLC series is a fast, responsive, reliable, and cost-effective fiber laser cutting machine. This is a high-efficiency laser cutting machine designed to upper-class standards. It can accommodate laser power up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used for processing in the production of agricultural machinery, textile machinery, food machinery, construction equipment, elevators, and other large machinery and installations. It is an ideal cutting machine for those looking to outsource their cutting needs. Allows for easy blowing, cutting, pausing, calibration simulation, etc., via the wireless remote control. Standard nesting software rapidly nests parts to be cut, readying them for cutting with minimal operator intervention. Also features flycut cutting functionality. Featuring a double exchange table system, you can continue cutting without downtime. All our machines are manufactured to European standards and come with CE certification. Our FLC series machines are equipped with nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Rcederuwb Hjpfx Abysb Our laser head features autofocus and an active anti-collision function, as well as an auto-view function that detects obstacles and moves automatically. Cutting heads are fitted with automatic cooling. The bridges used in all of our machines are constructed from one-piece welded aluminum alloy sheets. This one-piece design ensures bridge rigidity and prevents deformation from impacts, overlaps, or loads. Furthermore, thanks to their structure, which is three times lighter than steel bridges, we achieve high speeds and acceleration with lower motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch CNC touch controller - Fly-cutting functionality - Nozzle and lens starter kit - Part debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote query - Automatic lubrication system - Dual camera

Kondisi: baru, Dimensions (LxWxH): 1520 x 950 x 1780 mm Weight approx.: 1,440 kg Total power requirement: 4 kW Square steel: 35 mm Round steel: 40 mm Punching force: 60 t Throat depth: 220 mm Flat bar shear: 200 x 20 mm or 300 x 15 mm Notching (Thickness x Width x Depth): 10 x 42 x 100 mm Punching – Round: 28 x 15 mm or 38 x 11 mm or 110 x 3 mm Angle steel cutting 90° or 45°: 120 x 120 x 12 mm or 80 x 8 mm - With one cylinder - 5 workstations: punching station, notching station, as well as flat, bar, and angle steel cutting stations. Supplied in the following version: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for set-up and operation modes - Support table at notching and flat bar station with stops - Support table at punching station with stops - CE version FEATURE DESCRIPTION / VALUE Punching force: 60 t Throat depth: 220 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Max. sheet thickness: Ø 28 x 15 mm Working height: 955 mm Flat bar shear Cutting capacity: 300 x 15 mm, 200 x 20 mm Angle steel 45° (one leg): 80 x 80 x 8 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round: 40 mm Square: 35 mm Material thickness: 10 mm Redpjd Ab Hyefx Abyocb Width: 1,520 mm Depth: 950 mm Motor power: 4.0 kW Mains voltage: 400 V, 50 Hz Height: 1,780 mm Weight: 1,440 kg

Kondisi: baru, translation-001 Rjdpfsd Eqq Asx Abyscb

Kondisi: baru, Dimensions (LxWxH): 1500 x 950 x 1680 mm Approx. weight: 1,165 kg Total power requirement: 4 kW Square bar capacity: 25 mm Round bar capacity: 30 mm Punching force: 45 t Throat depth: 220 mm Flat bar shear: 200 x 15 mm or 300 x 12 mm Notching (thickness x width x depth): 8 x 35 x 75 mm Punching – round: 22 x 15 mm or 38 x 8 mm or 100 x 3 mm Angle iron cutting 90° or 45°: 100 x 100 x 10 mm or 70 x 6 mm - Single-cylinder design - 5 workstations: punching, notching, flat bar cutting, bar cutting, angle steel cutting Configuration includes: - Hydraulic and electrical components from reputable manufacturers - Foot pedal - CE conformity - Technical documentation - Selector switch for setup and operation modes Rjdpfxod Ab Hzj Abyjcb - Support table with adjustable stops for notching and flat bar stations - Support table with adjustable stops at the punching station Technical Data: Punching force: 45 t Throat depth: 175 mm Stroke: 50 mm Strokes per minute (at 20 mm stroke): 20 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Flat bar shear capacity: 300 x 12 mm, 200 x 15 mm Angle steel 45° (single leg): 70 x 70 x 6 mm Angle steel 90°: 100 x 100 x 10 mm Blade length: 316 mm Round bar: 30 mm Square bar: 25 mm Material thickness: 8 mm Width: 1,430 mm Depth: 950 mm Motor power: 4.0 kW Voltage: 400 V, 50 Hz Height: 1,680 mm Weight: 1,165 kg

Kondisi: baru, Punching force: 55 t Approx. weight: 1,520 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,500 mm Blade length: 317 mm Throat depth: 255 mm Stroke: 60 mm – with one cylinder Five working stations: punching, notching station, and flat, bar, and angle steel shearing stations. Version features: - Hydraulic and electrical components from renowned manufacturers - Support table at the punching station with scales and stops - Support table at the notching and flat steel stations with stops - Electric longitudinal stop 1,000 mm for automatic cutting activation - Switch for setup and operation modes - Technical documentation - Lighting - 2 foot pedals - CE conformity SPECIFICATIONS / VALUE Punching force: 55 t Throat depth: 255 mm Stroke: 60 mm Strokes per min. (at 20 mm stroke): 25 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Shearing capacity: Rcedpfx Asttc Upsbyob - 300 x 15 mm - 200 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 317 mm Round material: 40 mm Square material: 40 mm Material thickness: 10 mm Width: 1,500 mm Depth: 950 mm Motor power: 5.5 kW Supply voltage: 400 V, 50 Hz Height: 1,880 mm Weight: 1,520 kg

Kondisi: baru, Punching force: 65 t Weight approx.: 1,600 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,700 mm Blade length: 380 mm Throat depth: 305 mm Stroke: 55 mm - Equipped with one cylinder - 5 workstations: punching, notching station, as well as flat bar, round bar, and angle bar shearing stations. Supplied with the following features: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for setup and operating mode - Support table at the notching and flat bar station with stops - Support table at the punching station with stops - CE-compliant design TECHNICAL DATA / VALUE Punching force: 65 t Throat depth: 305 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Sheet thickness (max.): Ø 26 x 20 mm Working height: 900 mm Shearing capacity: - 375 x 15 mm - 300 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 380 mm Round: 45 mm Square: 45 mm Material thickness: 10 mm Width: 1,700 mm Depth: 950 mm Rcjdpfx Abottc Utoysb Motor power: 5.5 kW Mains voltage: 400 V / 50 Hz Height: 1,880 mm Weight: 1,600 kg

Kondisi: baru, Shaft diameter: 30 mm Upper roller diameter: 148 mm Lower roller diameter: 118 mm Working speed: 2–4 m/min Motor power: 0.7 – 0.85 kW Length: 600 mm Width: 800 mm Weight approx.: 220 kg Height: 1450 mm Technical Specifications: Rcjdpfx Abod Eqqzeyjb - Steel frame - Both lower rollers are driven - Direct gear drive system - Upper roller runs idle (free spinning) - Hardened rollers - Roller shafts are hardened and ground - Two-speed motor - Standard rollers - Adjustable guide rollers - Horizontal and vertical working positions Options: - Digital display EUR 600 - Angle side guide rollers EUR 900 - Double speed STANDARD - Brake motor EUR 150 PK 30 File | Type | Size | Min. Dia | Notes 150x10 | 20x6 | 1800 | 300 | Standard Rolls 280x15 | 30x6 | 700 | 400 | Standard Rolls 330x30 | 10x10 | 900 | 200 | Standard Rolls 4Ø 30 | Ø 10 | 900 | 200 | Optional Rolls 5Ø 60x1.5 | Ø 25x1.5 | 1000 | 600 | Optional Rolls 61 1/2”x2.9 | 1/4”x1.8 | 600 | 300 | Optional Rolls 750x30x3 | 40x20x2 | 1200 | 800 | Optional Rolls 840x3 | 30x2 | 1200 | 800 | Optional Rolls 940x40x5 | 30x30x4 | 600 | 300 | Optional Rolls 1035x35x5 | 30x30x4 | 600 | 400 | Optional Rolls 1150x6 | 20x3 | 600 | 400 | Standard Rolls 1250x6 | 20x3 | 600 | 400 | Standard Rolls 1350x6 | 20x3 | 600 | 400 | Standard Rolls * Special washer (spacer) may be required / Only with special Beam Bending Attachment • Capacities are given for 260 N/mm² plate yield strength

Kondisi: baru, Shaft diameter: 50 mm Roller diameter: 155 mm Working speed: 4.5 m/min Motor power: 1.5 kW Length: 750 mm Width: 1000 mm Height: 1400 mm Weight approx.: 400 kg Technical specifications: - Steel frame - Two directly driven rollers - Rollers are hardened - Roller shafts made of special steel material, hardened and ground - Roller shafts housed in bearings - Standard rollers - Guide rollers - Horizontal and vertical working positions Options: - Digital display: EUR 700 - Angle side guide rollers: EUR 1100 - Double working speed: EUR 700 PK 35 file Type Size Min. Dia. Notes 1. 60x10 mm | 40x10 mm | 500 mm | 400 mm | Standard Rolls 2. 100x15 mm | 60x10 mm | 450 mm | 350 mm | Standard Rolls 3. 35x35 mm | 20x20 mm | 900 mm | 300 mm | Standard Rolls 4. Ø 35 mm | Ø 30 mm | 600 mm | 400 mm | Optional Rolls 5. Ø 70x2 mm | Ø 30x2 mm | 1000 mm | 500 mm | Optional Rolls 6. 2”x2.9 mm | 1”x2.3 mm | 1000 mm | 350 mm | Optional Rolls 7. 70x30x2 mm | 50x40x3 mm | 1200 mm | 1200 mm | Optional Rolls 8. 50x3 mm | 40x3 mm | 1700 mm | 600 mm | Optional Rolls 9. 50x50x5 mm | 40x40x5 mm | 800 mm | 600 mm | Optional Rolls Rjdpfx Abod Eqqwjyjcb 10. 50x50x6 mm | 30x30x3 mm | 1000 mm | 500 mm | Optional Rolls 11. 60x7 mm | 30x4 mm | 700 mm | 400 mm | Standard Rolls 12. 60x7 mm | 30x4 mm | 800 mm | 500 mm | Standard Rolls 13. 60x7 mm | 30x4 mm | 700 mm | 500 mm | Standard Rolls 14. UPN 80 | UPN 30 | 1000 mm | 500 mm | Optional Rolls* 15. UPN 80 | UPN 30 | 1200 mm | 800 mm | Standard Rolls* * Special washer (spacer) may be required / only with special beam bending attachment • Capacities are given for 260 N/mm² plate yield strength

Kondisi: baru, Press force: 200 | Bending length: 4080 mm | Distance between uprights: 4080 mm | Installation height: 590 mm | Max. stroke length: 300 mm | Dimensions (LxWxH): 5740 x 2130 x 2680 mm | Approx. weight: 13,000 kg | Motor power: 22 kW | CNC crowning via control: Yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-20040 Servo Drive Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, thanks to their flexibility and reliability, represent the technology of tomorrow. The increased speed and precision of this new generation of machines offers you improved efficiency, ergonomic features, and more environmentally-friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Rjdpfsd Etf Aox Abyjcb Dener is a pioneer of this technology, bringing extensive experience and quality to the market. Standard Equipment: KK-Industries is the exclusive representative for the DENER Group. We have assembled a premium model for Europe. The CNC Servo Electric Press Brake from KK-Industries, made by DENER: Technological Advantages – Model REVOLUTION DDM: The CNC Servo Electric Press Brake is distinguished by its high precision, accuracy, and versatile application range. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Full frame width utilization - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment Includes: - 3D color graphic control DELEM 66 T, 17” touchscreen - CNC control for Y1, Y2, X, and R axes - CNC crowning via 3D control - X-axis 500 mm, R-axis stroke 150 mm for 1.5 m and 2 m models - X-axis 750 mm, R-axis stroke 250 mm for all other press brakes - We make no compromises on upper tools and dies, equipping the KKI REVOLUTION CNC Servo Electric Press Brake with high-quality tooling from EUROSTAMP Italy: - Segmented gooseneck upper tool - 4-V die block 60x60 (V= 16, 22, 35, and 50 mm) - Programmable backgauge with servomotors on linear guides and ballscrew - Every machine is only as good as its service: that’s why we emphasize highly qualified staff with long-term experience in CNC sheet metal processing. - Laser safety device on the upper beam - CE safety equipment - Operating instructions in GERMAN and ENGLISH Options: - Additional controlled backgauge axes: X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis backgauge, X1, X2 – R Type backgauge - X-Prime Type backgauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen control DELEM DA-69T KK-Industries GmbH

Kondisi: baru, Working width: 1,500 mm Working length: 3,000 mm Accuracy +/-: 0.05 mm Max. loading weight: 1,250 kg Dimensions (LxWxH): 8,100 x 2,200 x 2,560 mm Approx. weight: 7,900 kg Laser power: 2 kW Max. material thickness St 37-42: 14 mm Max. material thickness St 37-42: 4 mm Max. thickness stainless steel: approx. 5 mm The FLC Series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting system that meets upper-class standards. The machine can accommodate laser power up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used for manufacturing agricultural machinery, textile machines, food processing machines, construction equipment, elevators, and other large machines and installations. This is an ideal cutting machine for anyone looking to outsource cutting operations. Effortless blowing, cutting, pausing, calibration simulation, etc. are enabled via the wireless remote control. Standard nesting software allows rapid preparation of parts for cutting without operator intervention. It also features flycut functionality. Thanks to the double exchange table, cutting can continue without downtime. All our machines are manufactured according to European standards and come with a CE certificate. Our FLC models are equipped with nozzle cleaning and a dual-camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus, active anti-collision, and an auto-view function that detects obstacles and automatically adjusts. Cutting heads are equipped with automatic cooling. The bridges in all our machines are manufactured as single-piece welded constructions from aluminum alloy plates. The single-piece structure provides bridge rigidity and prevents deformation caused by impacts, overlaps, or load. In addition, compared to steel profile bridges, their threefold lighter weight allows for higher speeds and acceleration with reduced motor power. Included accessories: - Water chiller - Control cabinet cooling Rcsdpfx Aotqy Tfsbyeb - Automatic focus head - Nesting software - 19" touchscreen CNC control - Flycut function - Nozzles and lens starter kit - Scrap drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site operator training - Wireless remote query - Automatic lubrication system - Dual-camera system Laser type: Enclosed design CNC unit: CypCut Autofocus: Yes Working area: 1500 x 3000 mm Repeatable positioning accuracy: ±0.03 mm/m Positioning accuracy: ±0.05 mm/m Max. speed: 120 m/min Max. acceleration: 1.2 G Max. load per table: 1,250 kg Laser source: 2,000 W Han’s resonator Table changeover time: 15 s Laser cutting head: Raycus autofocus Power supply: 380 V 50 Hz (three-phase) Graphic formats: dwg / dxf / stp Chiller: available Average machine dimensions: 2,200 x 8,100 x 2,560 mm

Kondisi: baru, 1 Rjdpfx Ajytyy Njbyecb

Kondisi: baru, Travel (X-axis): 4000 mm, Travel (Y-axis): 2000 mm, Travel (Z-axis): 250 mm Pump Capacity for Flushing: 37 l/min Control System: Siemens PLC with Touch Screen, direct use of DXF files Output Pressure: max. 5500 bar Abrasive Delivery System for Waterjet Cutting Machines – Filling Weight 350 kg OMAX Vacuum Sensor for Monitoring Abrasive Supply to the Nozzle Sensor for Pump Pressure Monitoring In waterjet cutting, water is pressurized up to 5500 bar. Depending on the requirement and workpiece, it is then forced through a nozzle with a diameter from 0.01 to 0.08 mm. As the waterjet technology machines materials without heat input, no deformation occurs. By adding an abrasive, waterjet cutting achieves the highest precision with tolerances of +/- 0.01 mm. Our flexible manufacturing enables both vertical and bevel cutting. We are pleased to accept your individual CAD files. Waterjet technology offers significant advantages for industry, trade, and custom prototype manufacturing. Waterjet cutting is also environmentally friendly, as it operates without dust or fumes and is material-efficient. Waterjet Cutting: Sample Gallery What already sounds impressive in theory is even more remarkable in the finished product. We have compiled a selection of images to demonstrate our capabilities in waterjet cutting. Browse through our sample gallery to gain an impression of what is possible with this modern machining process. Waterjet will find the right solution for your project! Advantages - No deformation in the cutting area - Cold cutting—no thermal influence - Material saving - High precision: +/- 0.1 mm - Cutting range: X = 4010 mm; Y = 2010 mm; Z = 250 mm - Flexible manufacturing - Vertical and bevel cuts - Acceptance of your CAD file formats: DXF, DWG, iges, stp, step, prt, jpt, jam - Environmentally friendly: fume- and dust-free We cut everything! All materials shapeable: - Aluminum - Steel - Brass - Copper & Bronze - Other precious metals - Glass - Granite & Marble - Tiles - Composites - Foam blanks - Rubber - Plastics - Plexiglas Optional Equipment: Rjdpjd Ab Uuofx Abyscb Oil Cooler ..... €10,725.00 Water Filtration System ..... €1,430.00 Sludge Extraction System ..... €10,725.00 Professional Water Treatment .... €10,725.00 An oil cooler must be present at commissioning! To allow operation beyond 1 hour.

Kondisi: baru, Bending length: 2100 mm Sheet thickness: 6 mm Top roll diameter: 170 mm Technical specifications: - Rear roll powered by motor - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel Redpfx Abod Ab Npjyocb - Asymmetric design for precise bending - Top and bottom rolls driven by brake electromotors and planetary gearbox - Portable control panel - Built in accordance with CE standards Options: - Bottom roll powered by electric motor: EUR 1,650 - Digital display for rear roll position: EUR 1,010 - Extended rolls: EUR 966 - Profile rolls: EUR 1,190 We have numerous references!

Kondisi: baru, Bending length: 2600 mm Sheet thickness: 6 mm Top roll diameter: 190 mm Rsdpfsx Twiiex Abyocb Technical Specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital readout for side rolls - Portable control console - Rolls are mounted with bearings - Top roll cover hydraulically openable and lockable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements are hydraulically driven Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 6,600 We have many references!

Kondisi: baru, Sheet thickness: 8 mm | Bending length: 3,100 mm | Top roller diameter: 230 mm Technical Data: Maximum sheet thickness: 8 mm (5/16") Pre-bending capacity: 6 mm (1/4") Minimum bending diameter (with upper roller diameter = TRD): TRD × 3 Working length: 3,100 mm (10 ft) Motor power: 7.5 kW (10.1 HP) Number of rollers: 4 Roller dimensions: - Top roller diameter: 230 mm (9.1") - Lower roller diameter: 210 mm (8.3") - Side roller diameter: 190 mm (7.5") Machine dimensions: - Length: 5,200 mm (17.1 ft) - Height: 1,300 mm (4.3 ft) - Width: 1,400 mm (4.6 ft) Weight: 5,830 kg (12,853 lbs) Equipment and Features: - Hardened and polished rollers - Complete body made of ST-52 steel - 4 symmetrically arranged rollers - Hydraulically driven top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and lower rollers driven by hydraulics and gearbox - Vertical movement of the lower roller is hydraulically driven - Mobile control panel - CE-compliant Options: - Variable rotation speed: EUR 4,681 - Material feed table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 7,070 - Automatic material extractor - PLC control system - CNC control system - Automatic material feed system - Interchangeable top roller - Adjustable lower roller support system (for special customer requirements) We have numerous references available! Rodpfx Abed Ab Saoyecb

Kondisi: baru, Sheet thickness: 20 Bending length: 2600 Top roll diameter: 330 Technical data: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulic top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic approach - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically operated - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed: EUR 4,681 - Material feed table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,200 - Automatic material extractor Rodpfod Ab R Ajx Abyscb - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable support system for lower rolls (for special customer requirements) We have many references!