Pembagi gulungan Pemotong gulungan Guillotine

Klanke RGS20

Kondisi: baru, - Motor power 7.5 kW - Cutting force 20 tons Cutting channel designed for: - max. roll length 1100 mm - max. roll diameter 900 mm - Machine weight approx. 2,500 kg - Tank capacity approx. 100 liters - Hand protection grid in the area of the control panel and on the opposite side - Color scheme: body RAL according to customer specification Dsdpfx Asftnt Nobhecc Protection grid/cutter bar RAL 1028 melon yellow Made to order Price and further information on request

Kondisi: baru, Tahun pembuatan: 2024, Hacker knives 40 x 40 concave Dedpfobxu Dhsx Abhscc Knives for Weima, Gross ... Suitable for almost all common chippers/shredders Available from stock in Bitburg Subject to prior sale

Kondisi: baru, Tahun pembuatan: 2026, Consisting of a bale breaker for large bales, type MHB, and straw shredder type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (Approx. 15 weeks production time) Suitable for round or square bales. Including frequency inverter (controls the speed of the scraper floor). The bales are placed on the scraper floor and the cutter head feed is switched on. The cutter head tines tear the straw from the bale and throw it into the hopper. Ideally, this machine is combined with a straw shredder. Technical data for bale breaker: Capacity: 1–2 bales per hour Up to a maximum of 600 kg per hour (depending on the installed sieve size in the straw mill, kW rating of the straw mill). Without a straw mill, the bale breaker can process up to 900 kg/hr of straw. Maximum square bale size: 2400 x 1200 x 800 mm (LxWxH) Cutter head motor: 5.5 kW, 380 V Scraper floor feed: 0.75 kW, 380 V Dimensions: 3750 x 1730 x 2460 mm (LxWxH) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for the larger straw shredder (18.5 kW): +€3,940 net Technical data, MHZ with special feed hopper: Motor: 15 kW, 380 V electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts Selectable perforation (10, 12, 15) 22, 30, 45 mm With star-delta switch, overload protection, and 8 m power cable, ready to plug in Discharge spout: 160 mm Blowing distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (LxWxH) Weight: approx. 240 kg --- Options at extra cost: Dcedpfjb Nulhex Abhoc Feed auger: +€970 net Cyclone (suspension by customer) *should be no more than 10 m away +€2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional rotary valve (renders material pressureless) +€5,750 net Control system: from €1,620 net Special bale breaker extension 3m (other dimensions upon request) +€9,750 net Briquetting press MPP 180 S; little-used demonstration unit 70 mm briquette – up to max. 100 kg/hr from €39,700 net * Larger machines available on request --- Description: muetek bale breaker was developed for processing round and square bales of hay and straw. The attached shredder processes straw from all types of cereal crops, hay, corn, and miscanthus. muetek machines from the MHZ/MHB series are characterized by their robust design and heavy-duty construction. muetek bale breakers of the MHB series are equipped with a chain conveyor onto which the bale is placed using a front loader. The support is adjustable depending on the type of bale. The chain conveyor pushes the bale against the cutter rotor; the feed speed is adjustable. The cutter rotor is fitted with multiple teeth which rip open the straw bale. The separated straw is then discharged. --- The machines are generally designed for dry materials: - Straw - Hay --- Processing hemp bales is only possible with a special bale breaker Surcharge approx. €9,720 net (depending on configuration) Straw mills are not suitable for processing hemp. Material requirements: Maximum moisture content: 12%

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 21.676 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 750 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 25.000 kg, tinggi transportasi: 3.000 mm, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), berat kosong: 25.000 kg, laju aliran volumetrik: 930 m³/jam, tekanan kerja: 250 batang, Hello, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Dcedpjvgrh Ujfx Abhoc Pressing force (main press): 78 t Specific pressing force: 95 N/cm² Pre-press lid force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 l Press dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Kondisi: baru, - Motor power: 9 kW - Control: PLC-assisted, two-hand safety control Dedped Hf Tdofx Abhscc - Cutting force: 35 tons - Splitting table: straight design - Cutting channel: - Max. blade length: L = 2000 mm - Max. opening: H = 1200 mm - Machine weight: approx. 4 tons - Hand protection grid in the area of the operator panel and on the opposite side - Forklift entry shoes included (for easy transportation of the machine by forklift) In stock – immediately available Price and further information upon request

Kondisi: baik (bekas), Tahun pembuatan: 1987, Manufacturer Model: PS 8100 Height: 2,200 mm Width: 1,200 mm Length: 1,625 mm Loading height: 1,900 mm Weight: 800 kilograms Dcodsk E Hh Sepfx Abhoc Rated current at 400 V: 4.8 A Transformer rated current at 230 V: 0.38 A Motor power: 2.2 kW Fuse: 10 A, slow-blow Rotation: 13 rpm Protection class: IP 54 Fire class: D, E Hydraulic oil: HLP 32 Bale weight (depending on material): 150-400 kg Bale volume: 1 m³

Kondisi: baru, Tahun pembuatan: 2025, Klanke roll slitter for efficient shredding of reject rolls. Features: - Automatic safety locking mechanism - Blade guard - Emergency stop pull cord - Siemens PLC Technical Specifications: Blade length: 1500 mm Cutting channel opening: 800 mm Motor power: 7.5 kW Cutting force: 30 tons Made to order. Dodpsn Hy H Nsfx Abhscc Price and further information on request. We are happy to provide you with a non-binding offer.

Kondisi: baru, Tahun pembuatan: 2025, Daya motor 7,5 kW - Gaya pemotongan 30 ton Saluran pemotongan dirancang untuk - panjang rol maks. 1500 mm - diameter rol maks. 850 mm - Berat mesin sekitar 3.500 kg - Kapasitas tangki sekitar 110 liter - Kisi pelindung tangan di area panel kontrol dan sisi seberangnya - Pengunci pisau - Meja pemisah model lurus Dcsdpfxsgl Adzo Abhoc - Dokumentasi 2 rangkap dalam bahasa Jerman (1x bentuk teks, 1x CD) - Warna RAL 5012 - biru muda Kisi pelindung/palang pisau RAL 1028 kuning melon Mesin tersedia di gudang dan siap dikirim segera Harga dan informasi lebih lanjut atas permintaan

Kondisi: bekas, nomor mesin/kendaraan: 11629, Rotor diameter: 450 mm Rotor width: 800 mm 5 x 5 blade rotor (offset arrangement) 2 rows of stator blades Dsdpfx Abeghgqaehecc Feed opening approx. 600 x 800 mm Drive motor: 55 kW With soundproof enclosure, mobile

Kondisi: baik (bekas), Tahun pembuatan: 1989, Shredder + press + conveyor belt + complete silo Dcedpor Dvdkjfx Abhec