Mesin cetak kertas

BTS-MF500LH Ballenpresse Waste Baler

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The BTS-MF500LH is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 500 kg. Thanks to its compact design, it is especially suitable for premises with limited height. The baler impresses with its straightforward and safe operation, as well as its large feed opening. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and properly return the material to the recycling loop. Pressing force: 50 tonnes Bale weight: up to 500 kg (material-dependent) Bale size: 1100 H (var.) x 1400 W x 800 D mm Machine dimensions: 2249 H x 2041 W x 1350 D mm Machine weight: 2100 kg Transport height: 2249 mm Feed opening: 1400 W x 680 H mm Pressing cycle time: 35 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB PLC control with automatic press cycle, Bale-ready indicator and emergency stop with key Web-bale ejector for easy bale removal Retaining claws to reduce material spring-back Bljdova Ekvepfx Am Iog Low overall height: perfect for rooms with restricted ceiling height Hour meter Holder for 6 rolls of strapping tape A quality product "Made in Europe" Suitable for compacting: Cardboard Films Big bags Cans and PET bottles Light recyclables Additional options: Annual maintenance with UVV inspection Machine color per RAL Strapping tapes Baler, cardboard baler, waste paper baler, carton press, cardboard press, film baler, paper baler, waste baler, waste compactor, waste press, recycling press, refuse compactor, refuse press.

Kondisi: baik (bekas), Tahun pembuatan: 2014, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Required space: approx. 5.00 x 4.00 x 2.20 m --> Control retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical specifications Grinding diameter: 20 - 300 mm Swing diameter: 350 (500) mm Workpiece length: 300 (1300) mm Recommended maximum grinding depth: up to 300 mm --> Grinding table travel Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min --> Grinding stroke speed: 0 - 9.99 m/min --> Infeed speed: 0 - 99.99 m/min --> Incremental infeed value (reversal): 0 - 0.999 mm Blodpsw Intaefx Am Ijg --> Grinding table travel X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min / revolution --> Grinding stroke speed: 0 - 5 m/min / revolution --> Infeed speed: 0 - 99.99 m/min / revolution --> Incremental infeed value (reversal): 0 - 0.999 mm / Ø --> Workpiece spindle head swiveling range: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36”) --> U-axis travel (total): 300 mm --> Resolution: 0.001 mm / Ø --> Traverse speed: 5 m/min --> Center height above work table: 200 (300) mm --> Center height above grinding table: 330 (430) mm --> Workpiece spindle bore: 50 (70) mm --> Original year of manufacture: 1988

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), NEUE HERBOLD granulator Universal mill – heavy duty design - Year of manufacture: 1998 - Constructed from stainless steel - From a technical center (machine was exclusively used for testing/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 knife rows Bledpfxeh Rwc Eo Am Ijg

Tahun pembuatan: 2006, Kondisi: hampir baru (bekas), Contenitore con volume di 32 m³ Bedpfx Ajfhb Tkom Ielg

Kondisi: bekas, Tahun pembuatan: 1992, kecepatan spindel (min.): 7.500 rpm, kecepatan spindel (maks.): 24.000 rpm, 4 motor-driven grinding spindles (liquid-cooled, sealing air / oil mist lubrication) including the REFU HF converter, suitable for example for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 Bljdpsl Tn Afefx Am Isg 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032, 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter / inverter for supplying the motor spindles GMN tool spindle motor grinding spindle The spindles are fully functional, sold without warranty – year of manufacture approx. 1992 A collection of various grinding spindle shafts / arbor mandrels for grinding wheels is available for these grinding spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries within the European Community.

Kondisi: siap digunakan (bekas), de Bedpownx Uijfx Am Ijlg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. Bledpfxsvf E Avo Am Ieg - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Tahun pembuatan: 2011, Kondisi: baik (bekas), Offer 24370 Technical Data: - JUNGHANS sludge filter press with cylinder unit + conveyor belt - Flocculation plant - Pumps Bjdpfx Amst Srkpe Ijlg - Control cabinet with electrical installation - Aluminum water collection tray integrated in the entire container floor - Lighting - 4-door sea container - Required space approx. W 6.0 x H 2.4 x D 2.4 m - Weight approx. 5000 kg - Separate conveyor belt, length 8.0 m

Kondisi: bekas, Tahun pembuatan: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The line is new and can fill chemical products into plastic containers. With the exception of the bottle infeed and Posimat system, it is also capable of processing glass bottles. Thanks to ATEX certification, the line can handle explosive products. The system comes with a 2-year warranty (for single-shift operation), and all components can be purchased individually. Technical details Capacity: 9,000 containers/h (varies depending on bottle volume and product) Containers: Max. diameter: 100mm, Max. height: 300mm Siemens S7 control system Individual machines Bottle unscrambler | ALWID | POSIMAT-ACCESS-N15 Bottle feeding system with 2,000 l hopper, in stainless steel; chassis and supports in painted standard steel Positronic control system for optimal adaptation to downstream filling machine Fully internally wired with attached control cabinet in painted standard steel Machine built according to CE directives; i.e., max. noise level of ≤ 80 dB +/- 2 Combined filling and capping machine (block system) | ALWID | SUPERIOR-16MDM-5SK Fully automatic rotary filler Filling system: mass flow measurement system, type: Endress+Hauser LPG MASS Number of filling stations: 16 Filling valve diameter: Ø12mm Max. container dimensions: Height: 50–300 mm, Ø: 20–100 mm Fully automatic rotary capper Number of capping heads: 5, with torque adjustment via slip clutches Fully automatic cap sorting and feeding with BONINO disc sorter with elevator Includes chute switch for machine shut-off in case of missing caps Checkweigher | ALWID | OCS-HC-M-2000-1 Applied safety and machinery directives: CE compliant Industrial load cell with stainless steel housing, electromagnetic force compensation principle Power transmission to the load cell without force shunts Front guard to reduce influences on weighing results Stainless steel control cabinet 10.4 inch color TFT touchscreen, VGA resolution Bsdpfsmfqm Dox Am Islg Ergonomic operation via tiltable stainless steel operator terminal Freely configurable user interface with intuitive operation Inkjet printer | Domino | Ax350i Fast printing of texts and multi-line codes at high speeds Labeller | ALWID | SES-120-III Tandem Version Max. label height: 120mm Photoelectric sensor for label detection 2 x automatic winding stations including pressure plate Mounting device with height adjustment for side-mounted label dispensers Adjustable side guides – clearance width up to 150 mm Conveyor system

Kondisi: hampir baru (bekas), Manufacturer: V. Randwijks Rotor diameter: 500 mm Rotor width: 700 mm Drive: 22 kW / 1,470 rpm Bjdpsg Snt Sefx Am Iolg