Mesin Penggiling Cacing CNC

Klingelnberg HNC35

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), Workpiece diameter: 10–350 mm, max. grinding length: 660 mm, clamping length: 1055 mm, max. module: 25 mm, swiveling angle: +/-60°, grinding wheel dimensions: 300–500 x 100 mm, equipped with Faudi coolant band filter and Elbaron oil mist separation unit. Classified as no longer operational and can only be used as a basis for a complete overhaul. Hodpfxjrgah Ho Agqjnk

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: Maximum wheel diameter: 200 mm Wheel width: 60 mm Maximum module: 7 Machine weight approx.: 15 t Table diameter: 180 mm Table speed range: 100 rpm Cutter speeds: 750 rpm Well-maintained gear hobbing machine without feeder/automation Hnjdpjxc E H Sefx Agqek Available from: 24.08.2024

Tahun pembuatan: 1998, Kondisi: hampir baru (bekas), Laser type: Q-switched pulsed solid-state laser Laser medium: Nd:YAG Hjdpfx Agjd Dhw Njqsnk Wavelength: 1064 nm Beam diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam divergence: 5 mrad multimode, 2 mrad TEM00 Pulse duration (time): CW / 90 ns Max. output power: 65 W (130 W optional) multimode, 16 W single mode Pulse energy: 16 mJ (30 mJ optional) at 3 kHz Operating modes: CW, Q-switched from 0.1 to 100 kHz Beam deflection system: Galvanometer system Line width in mixed mode: approx. 0.12 mm

Kondisi: sangat baik (bekas), Thread diameter 5 - 200 mm Grinding length 500 mm Thread pitch 0.25 - 6 mm Max. clamping length 850 mm Grinding wheel diameter 350 mm Center height 105 mm Hedswvl H Uepfx Agqsnk Threads M2 - M149 Thread - inch 3/32 - 4 inch Tilt left/right +/-10° Total power requirement 6 kW Machine weight approx. 3.2 t Space requirement approx. 2.5 x 1.7 x 1.5 m

Kondisi: bekas, Tahun pembuatan: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over sub-slide: 138 mm Swing diameter over sub-slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Hnsdjvbhv Rjpfx Agqjk Spindle speeds: 1.8 - 450 rpm, 8-step, stepless Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Application: Primarily used for back-turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitches). Back-turning and relief grinding can be performed from the front, rear, and along the machine axis. Main drive through an 8-speed manual gearbox. Feed gearbox is a 12-speed manual gearbox. Swivel range of sub-slide = 360° Swivel range of cross-slide = 360° Chuck is a cone plate Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm ARBAH-L 3+1 measuring system FRENIC 5000G11 inverter 3-jaw chuck Ø 250 mm in good condition.

Kondisi: sangat baik (bekas), panjang pemakanan sumbu X: 450 mm, panjang umpan sumbu Y: 300 mm, panjang umpan sumbu Z: 300 mm,

Kondisi: bekas, Tahun pembuatan: 2007, Turning diameter: 140 mm Turning length: 615 mm Control: C200-4D Spindle bore: 65 mm Spindle speed: 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Hedpfx Agowzynqeqjnk Turret slides: 1, 2, and 3 X-axis travel: 110 mm Z-axis travel: 360 mm Y-axis travel: 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Slide travel X-direction: 150 mm Slide travel Z-direction: 600 mm Spindle speed: 5,000 rpm B-axis (correction axis): +/- 1° Tool turret - number of stations: 3 x 12 Tool holder DIN 69880 VDI 25 x 48 C-axis: 0.001° Total power requirement: 61 kW Machine weight approx.: 6.5 t Space requirement approx.: 9.75 x 3.10 x 2.85 m Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 for bars with lengths from 500 to 3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading device BREUNING ILS-REX-7208, year 2007

Kondisi: bekas, Tahun pembuatan: 2010, Palettes: 2 Number of axes: 4 pcs. Tool holder: HSK 63 Hodpfxeqn A Rkj Agqsnk Tool stations: 60 Weight: 9,600 kg Spindle speed: 18,000 rpm Coolant filtration system: Yes Chip conveyor: Yes

Kondisi: sangat baik (bekas), Walter dividing head Type UPA 125 N (28487) Hnedpfxjtrnndo Agqok direct and indirect dividing center height 125 mm suitable for horizontal and vertical operation spindle taper MT 4 KKG 3 travel range SPH 125 mm mounting taper MT 2 total transport weight 62 kg dividing head 48 kg

Kondisi: bekas, Tahun pembuatan: 2005, Mesin Gerinda Roda Gigi Reishauer RZ150 Hnedpfx Aoxz E Srogqok