Mesin pembersih botol

Klinger

Tahun pembuatan: 2018, Kondisi: bekas, 2-vessel brewhouse mounted on a stainless steel frame as a brew block. This setup consists of the following components: - Mash/lauter tun made of stainless steel for mashing in, mashing, and draining the mash. Independent control of the thermo-oil heated jackets and bottom. The double-walled vessel is clad with insulation and features a polished interior surface. The top-mounted motor drives the cutting and stirring unit with stepless speed regulation. For lautering, there is a multi-piece perforated false bottom and a rectangular side manway for spent grain removal. Additionally, the vessel is equipped with a hinged lid, CIP spray head, temperature probe, and spraying unit. - Stainless steel wort kettle/whirlpool. The vessel is double-walled and features welded heating zones in both jacket and base, heated with thermo-oil. It is also insulated and equipped with a temperature probe, hinged lid, CIP cleaning head, spray unit, height-adjustable locking mechanism, and a tangential wort inlet for knockout. The inner surface is polished. - Single-stage plate heat exchanger for cooling wort from 100°C to 18°C while simultaneously heating water from 13°C to 77°C. The wort from one brew can thus be cooled within approximately one hour. Plates are made of stainless steel 1.4401 (AISI 316) and seals are EPDM. The wort chiller features a PT1000 temperature sensor. - Thermo-oil heater to heat the laser-welded heating zones of the brew vessels. Approximately 50-65 liters of oil are electrically heated in the thermo-oil tank to a maximum of 150°C. A safety switch automatically stops heating when 160°C is exceeded. The vessel is equipped with temperature and level sensors. A pump circulates the thermo-oil in a closed loop. - 12 hl hot water tank, standing separately on three legs, with a manway on top. The tank is heatable, insulated, and equipped with a hose level indicator, temperature probe, and hot water pump. - Centrifugal pump for product transfer between vessels and for CIP cleaning, with a motor power of 0.37 kW and stepless speed control. - Stainless steel piping and manual valves for redirecting product flows. Pipes are orbitally welded with polished inner surfaces. - Control unit with 10” touchscreen and PLC for brewhouse automation, housed in a stainless steel control cabinet. The following processes can be controlled and monitored: 1. On/off of agitator and cutting unit, and speed control. 2. Temperature control of mash/lauter tun. 3. Temperature control for kettle/whirlpool (separate for jacket and base). 4. On/off for product and CIP pump and speed control. 5. Display of inlet water temperature. 6. Display of wort temperature at outlet. 7. Temperature control of the thermo-oil tank. 8. Timer settings. 9. Mash program settings (multi-step mashing with up to 5 rests; adjustable times, temperatures, agitator and pump speeds). 10. Hot water tank temperature. Machine (additional): Compact brew block with hot water tank Max. wort output: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Height: 1952 mm Operation / control: control cabinet with PLC and touchscreen Material: stainless steel 1.4301 (AISI 304) Hnsdpfew Tbmdox Aa Njg Base structure: brew block on stainless steel frame, hot water tank separate Equipment: mash/lauter tun; wort kettle/whirl...

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Tersedia sistem reverse osmosis dua tahap lengkap dengan alat pelembut dari Eurowater. 1) Sistem reverse osmosis dua tahap Eurowater DPRO B1-2/2, tahun pembuatan: 2013, kapasitas aliran maksimum: 1,08 m³/jam, pipa tekanan: stainless steel, sistem pipa: PVC, diameter membran: 4 inci, dimensi mesin P/L/T: sekitar 730 mm / 700 mm / 2000 mm. 2) Alat pelembut Eurowater SM 42-F, tahun pembuatan: 2015, dimensi mesin P/L/T: sekitar 1000 mm / 500 mm / 1650 mm. Dokumentasi tersedia. Inspeksi di lokasi dimungkinkan. Hnedpfx Asw Ryu Usa Nog

Kondisi: bekas, Tahun pembuatan: 2010, en-overview-this-bottle-washing-machine-arcade-gel-6-was-built-i n-2010-by-the-german-manufacturer-gm-gera-the-machine-is-still-in -operation-and-can-be-inspected-at-any-time-the-arcade-gel-6-is-f ully-functional-and-is-being-replaced-due-to-an-increase-in-produ ction-capacity-technical-details-nominal-capacity-33-000-bph-adju stable-range-13-200-36-300-bph-chain-pitch-169-mm-cell-pitch-110- mm-bottle-cells-per-row-30-units-total-bottle-cells-7-860-units-l oaded-bottle-cells-7-680-units-consumption-compressed-air-1-m-3-s team-operation-489-kg-h-steam-heating-4-430-kg-h-electrical-power -48-4-kw-water-7-35-m-3-h-tank-volumes-pre-soak-2-263-l-alkaline- pre-wash-7-240-l-alkaline-tank-1-31-755-l-alkaline-tank-2-350-l-h ot-water-tank-1-350-l-hot-water-tank-2-350-l-cold-water-350-l Hedpfx Ajt Ul Exoa Nong

Kondisi: bekas, KZE-1000 Hsdpew Tlq Hofx Aa Njng

Kondisi: bekas, Tahun pembuatan: 2006, Overview  The filler and capper block was manufactured in 2006 by the German company Filltec. Technical details  Number of filling stations: 32 Number of capping stations: 8  Magnetic cap feeder for crown corks Mains voltage: 400 V   Frequency: 50 Hz  Auxiliary voltage: 24 Volts DC  Electrical protection class: IP 54 Hnsdsm U R Dajpfx Aa Nsg

Kondisi: bekas, Tahun pembuatan: 1993, summary The bottle washing machine GM Gera NAGEMA Arcade DS was previously used in a brewery, where it operated in single-shift mode. Due to a decline in sales volume, the brewery’s bottling has been relocated, making this bottling line available. Thanks to its low operating hours and regular maintenance, the machine is in very good condition. All tanks and the machine frame are constructed from stainless steel. Spare parts, such as bottle cells, are still available. In 2018, the main drive shaft, motor, and gearbox (SEW) were overhauled, and the carrier chain was replaced in 2015. The machine is still assembled and can be demonstrated. Technical Data: - Capacity: 23,000 bottles/hour - Cell spacing: 85 mm - Bottles per row: 16 - Dimensions incl. attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: - Standard drives - Steam heating - Operator side: left - CE certified - Chemical dosing pumps - Machine data sheet available - Fixed-pipe spraying controlled by machine cycle - Single-ended machine - Label discharge rear right - Finger discharge and finger infeed - Bottle discharge left - Bottle cells plastic - HMI Lauer - Caustic concentration measurement - 24 volt control voltage - S5 controller (conversion to S7 on request) - Regularly serviced - Water content in stainless steel - Steam extraction Hnodol Hx Adopfx Aa Nsg - Sample taps - KSB pumps in stainless steel - Insertable screens for baths - Water meter - Conductivity measurement by Endress - Additional equipment: spare parts included

Kondisi: baik (bekas), Filtration system, manufacturer Seitz Orion, 100 x 100, for 180 hl/h, factory-refurbished in 2002, consisting of: - Kieselguhr frame filter with 29 stainless steel filter frames, external riser pipes, sight glass fittings with pressure gauge, kieselguhr discharge trough with stainless steel screw conveyor, and kieselguhr dosing device Hnedorai N Aopfx Aa Nog - Sheet filter with 150 stainless steel plates, external riser pipes, sight glass fittings with pressure gauge - Operator platform between both filters, steps at the kieselguhr filter - Control cabinet

Kondisi: bekas, Tahun pembuatan: 2024, Overview This bottle cleaning machine was previously used in a brewery. Due to its low operating hours, the machine is in excellent, near-new condition. It was replaced because the previous owner wanted to run bottle formats that were incompatible with this model. All tanks and the machine housing are made of stainless steel. The machine has already been dismantled and is stored dry, making it easy to load and transport. It comes with a 12-month warranty. Technical specifications: - Capacity: 9,500 bottles/hour - Cell pitch: 95 mm - Bottles per row: 25 Dimensions & weights: - Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg - Ready to operate with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg Hnsdpfx Aajvrfivj Nog Year of manufacture: 2024 Formats: 0.25 l, 0.33 l, 0.5 l, 0.75 l Machine details / features: - Steam heating - Pre-cleaning and residual liquid removal by pulsed rinsing before washing - CE certified - Chemical dosing pumps - Machine data sheet included - Reinforced high-pressure pre-rinse - Rotating spray nozzles - Single-ended machine - Infeed/outfeed via finger conveyor - Bottle pockets made of plastic - Concentration measurement - Liquid NaOH supply - Spindles made of stainless steel - 24V control voltage - Siemens S7 control system - Complete stainless steel machine body - Steam extraction - Machine dismantled and ready for shipping - Automated machine start-up (heating, etc.)

Kondisi: bekas, Tahun pembuatan: 2013, Overview The bottle washing machine was manufactured by the German company Krones in 2013 and commissioned in 2014. It has been serviced annually. Additionally, a surfactant caustic cleaning system and spare parts can also be purchased. DISMANTLING INCLUDED. Technical Data - Capacity: 66,000 bph - Maximum bottle diameter: 69 mm - Configured for the following formats: - Vichy 0.33l Hjdpfsl Hx Enox Aa Neng - Long-Neck 0.33l - Long-Neck 0.5l - NRW 0.5l - Steinie 0.33l

Kondisi: bekas, Tahun pembuatan: 2009, 7 standing indoor fermentation tanks Machine (add-on): standing, coolable tanks made of stainless steel Max. capacity: 2500 l Max. pressure: 1 bar Max. temp.: 50 °C Width: 1366 mm Height: 3820 mm Material: Stainless steel 1.4301 Orientation / position: standing cylindroconical tank Hnodpfx Aoxbn Naoa Njg Base construction: on tubular legs with dished ends Equipment: with cooling, insulation and stainless steel cladding, manway in the shell, sampler, tank top fittings, venting device, conical bottom with central outlet Weight: 800 kg