Bandsaw potong sudut horizontal - HB 380 L

Knuth HB 380 L

Kondisi: baik (bekas), Tahun pembuatan: 1992, JAESPA bandsawing machine, model W400 AZ Control: Minipos 807, Year of manufacture: 1992 Maximum cutting diameter (round material): 400 mm Blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total connected load: 4 kW Approx. weight: 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Space requirements: 2.8 x 2.8 x 2 m Iedpfogf H Sajx Aahjbf

Kondisi: baru, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Sturdy yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to oblique cut, feed controller, and cutting pressure controller • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-saving and low vibration due to oblique cutting • Ergonomic, safe and free-standing control panel Iodpfx Aajd Iipmohebf • Frequency-controlled saw drive 15 -100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid feed down to material start or for serial cutting, direct sawing 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Kondisi: sangat baik (bekas), The fully hydraulic high-production rapid bow saw machine is equipped with a universal hydraulic system, allowing for exclusive or alternating cutting of thin- and thick-walled profiles as well as solid materials—without the need to change saw blades—using a uniform tooth pitch of 3 or 4 teeth per inch. Features include preloaded bow guidance, enclosed oil hydraulics, triple pivot mounting, separate coolant system, infinitely variable hydraulic cutting pressure adjustment, lift-off motion and accelerated return stroke, as well as a continuously adjustable mitre device as standard. Rapid feed for raising the saw bow. The pendulum vise ensures optimal utilization of the saw blade. Longitudinal guidance with precision-ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop cut-off. Push-button controls for ON, OFF, and rapid movement of the saw bow. Manufacturer: KASTO Model: PSB 280 U metal bow saw Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per minute Cutting speed: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: hydraulic Cutting range round: 280 mm Cutting range flat: 280 x 150 mm Mitre range: 0–45° Material support height: 600 mm Ibsdpfx Aaoxdwbkehsf Weight: 650 kg Length/Width: 1500 x 600 mm Height: 1000 mm Saw blade size: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: coolant system, rapid-feed lowering, rapid-feed raising

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 5 kW (6,80 hp), jenis bahan bakar: listrik, berat kosong: 4.200 kg, Tahun pembuatan: 2024, filling hopper with discharge chute hopper capacity 10.5 m³ Ibjdpfjuqynmox Aahof S355 / St52-3 vibrating chute with 10mm Hardox 450 wear plate chute fully stress-relieved annealed 2 x unbalanced motors 2.5 kW each NEW

Kondisi: baru, Tahun pembuatan: 2025, Semi-automatic sawing cycle with workpiece clamping – sawing – automatic raising to preset height after completion of cut. Infinitely variable hydraulic cutting pressure and feed rate monitoring directly at the saw band guides. This ensures optimal conditions for every sawing operation: constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with varying cross-sections, materials, and frequently changing mitre cuts. Machine control complies with CE standard 89/289. Technical data: Cutting range in mm round/flat: 90°: 325 / 500 x 300 45°: 300 / 300 x 300 30°: 200 / 200 x 200 45°: 300 / 300 x 300 Rapid lowering of the saw frame to the material edge via push button. Manual mitre adjustment from 45°–90°–30°, stepless via scale. Mitre axis is at the intersection of saw band and fixed vise jaw, ensuring no change in length measurement when changing angles. Full-stroke hydraulic workpiece clamping – CETOP hydraulic system. At every frame angle, the material is clamped in parallel at 90°. Complete coolant system with electric immersion pump. Centralized machine operation. Saw band drive with end stop. Movable blade guide arm, adjustable to material width. Saw band deflection wheels with carbide blade guides. Integrated swarf removal brush. Saw band tensioning with torque wrench. Finish: silver grey / blue grey (RAL 7001 / RAL 7031). Remnant length: 60 mm. Cutting speed: AC frequency-controlled drive, 15–150 m/min, stepless adjustment at control panel. Drive: Saw band: 3.0 kW, 400V, 50 Hz Hydraulics: 1.1 kW Coolant pump: 0.1 kW Saw frame feed: Infinitely variable up to 300 mm/min, hydraulically controlled Saw band tension: Mechanically, with torque wrench Iedpfxet D Azco Aahjbf Blade dimensions: 4200 x 34 x 1.1 mm Working height: 750 mm (without mounting elements) Weight: 850 kg Dimensions (L x W x H): 1450 x 2350 x 1350 mm

Kondisi: baru, Cutting capacity at 90°: round 500 mm Cutting capacity at 90°: square 420 mm Cutting capacity at 90°: rectangular 600x400 mm Ijdpfx Ajupxupeahebf Saw band dimensions: 5320 x 34 x 1.1 mm Band speed: 15 - 100 m/min Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Space requirement: approx. 1.72 x 2.5 x 2.5 m Double mitre band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Mitre cuts left & right up to 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free, ball-bearing supported rotary material table • Saw band guides adjustable via extra-wide linear guide • Heavy-duty, robust gearbox • Large clamping plates • 2 integrated support rollers left and right • Removable chip tray (for cleaning/disinfection) • Freestanding, safe, and ergonomic control panel • Storage space for bands and consumables • Hydraulic cutting pressure regulator valve • Material height sensor (automatic cut start detection) • Ultra-fast clamping (front loading) • Hydraulic control for saw frame and vice • LEDs to monitor all safety functions • Minimum cutting capacity, round, from 10 mm Semi-automatic operation: 1. Clamp material 2. Start saw operation 3. Rapid downfeed to material or, for serial cuts, start cutting directly 4. Stop saw band 5. Raise frame just above material 6. Open vice

Kondisi: baru, Tahun pembuatan: 2025, For sawing pipes and solid materials made of stainless and tool steel Two band speeds via pole-changing motor Rugged gearbox with hardened and ground shaft Precise and robust blade guides with adjustable carbide pads Longer saw blade service life due to 25° saw arm inclination Efficient coolant application directly at the blade guides Electromechanical blade tension monitoring – a microswitch shuts off the machine if deviation occurs Chip brush for optimal cleaning and maintenance of the saw band Semi-automatic operation: Iodpsd Hx Uqofx Aahsbf - Automatic workpiece clamping after starting the cutting cycle - Saw cut performed with the selected band speed - Automatic stop of downward movement and saw blade at the lower end position - Automatic return of the saw arm to its upper home position - Vice opens automatically - Operator only needs to change/move material Equipment/features: - Two band speeds - Cutting position sensor - Coolant system - Chip removal brush - Saw blade tension monitoring - Swiveling control panel Dimensions approx.: Length: 1860 mm Width/depth: 1045 mm Height: 1750 mm Weight: 405 kg Drive power: Power consumption: 1.5 kW Electrical data: Connection voltage: 400 V Machine data: Band speed(s): 20 - 100 m/min Speed settings: stepless Band length: 2720 mm Band width: 27 mm Band thickness: 0.9 mm Miter angle: +60° to -45° Cutting capacities: 0° round (pipe): 230 mm 0° round (solid): 150 mm 0° rectangular horizontal (hollow section): 280 x 180 mm 0° bundle (pipes): 180 x 120 mm -45° round (pipe): 195 mm -45° round (solid): 110 mm -45° rectangular horizontal (hollow section): 180 x 170 mm -60° round (pipe): 125 mm -60° round (solid): 80 mm -60° rectangular horizontal (hollow section): 120 x 100 mm +45° round (pipe): 185 mm +45° round (solid): 110 mm +45° rectangular horizontal (hollow section): 180 x 120 mm Feed table height (material infeed): 785 mm Min. remaining workpiece length: 22 mm

Kondisi: baru, The SBS 355 is a powerful, semi-automatic bandsaw in the category of horizontal mitre bandsaws from KNUTH. This universal workshop bandsaw combines a compact design with a pivoting saw bow, which can be rotated up to 60° to the right and 45° to the left. The sturdy, laterally adjustable vise ensures precise cuts with its large stroke and long guides, while the one-piece saw bow made of cast iron provides high torsional rigidity. The machine offers efficient processing options for various materials and profiles thanks to hydraulic workpiece clamping and steplessly adjustable blade speed. The standard equipment includes a saw blade, a coolant system, and a robust base frame. With the SBS 355, you are choosing a robust and versatile solution in the category of semi-automatic bandsaws. Order now or request a quote to learn more about this reliable saw. Ibsdpfx Aaouy Ii Ejhjf

Kondisi: baru, The ABS 350 C is a powerful fully automatic bandsaw, designed for use in the category of horizontal mitre bandsaws and classed among fully automatic bandsaws. It impresses with its robust construction and high-quality components, ensuring outstanding reliability. Equipped with a heavy-duty machine frame and an automatic feed system via driven rollers in the clamping jaws, the ABS 350 C is ideal for both single and series production. The model features a mitre cutting function, enabling precise cutting of a wide range of materials such as solid stock, tubes, and profiles. A rigid saw bow, which can be manually swivelled up to 45°, ensures precise angles and reduces vibrations. In addition, adjustable carbide blade guides provide high vertical angular accuracy. Automatic blade breakage detection and a high-performance coolant system are included as standard features to meet your requirements. Order the ABS 350 C now to increase your production efficiency. Ibedpfx Aaen D Eizjhof

Kondisi: baru, The SBS 255 is a powerful, semi-automatic band saw from the category of horizontal miter band saws, notable for its compact design and versatile features. With its stable, side-shifting vise and robust saw bow made of cast iron, which can pivot up to 60° to the right and 45° to the left, the SBS 255 enables precise cuts in various workpiece sizes. The machine’s high-performance motor is engineered for continuous operation, while the combination of carbide jaw inserts and adjustable ball bearing guides ensures a high degree of cutting precision. The efficient coolant system and quiet operation increase productivity, especially when processing small batches. You can benefit from the SBS 255’s user-friendly design and easy handling to complete your tasks efficiently. This machine, which comes equipped with comprehensive standard accessories such as a saw blade and base frame, is an ideal choice for your workshop. If you are interested in the SBS 255, you can request a quotation now. Isdpouyiqdsfx Aahebf