Pers Bengkel - Press Dorn Putar 3 t

Knuth Drehdornpresse 3 T

Kondisi: baik (bekas), Tahun pembuatan: 1988, Weiler lathe Model: Condor B 2-axis digital readout Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Speed range: 22–2800 rpm Tailstock Morse taper: MK 3 Coolant pump (not connected) Work light automatic longitudinal and cross feed Spindle brake - Hinged chuck guard - Splash guard Gsdpovgmbvofx Abhobh Weight approx. 1,040 kg 3-jaw chuck Multifix B quick-change tool post Live centre

Kondisi: baik (bekas), Tahun pembuatan: 1998, nomor mesin/kendaraan: 0518018, 24600 Gbjdpfxjvncfmo Abhjh

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, diameter poros: 50 mm, diameter rol: 155 mm, berat keseluruhan: 400 kg, daya: 1,5 kW (2,04 hp), tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, henti darurat, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Power capacity (kW): 1.5 Voltage: 400 V Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (approx. kg): 400 Units in stock: 4 Gsdpjwt Sy Aofx Abhobh Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units available in stock, foot pedal included.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2019, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 19101105, lebar rol: 1.100 mm, Perlengkapan: Pelat tipe tersedia, riwayat servis lengkap, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine designed for both cold and hot lamination. It is intended for single-sided film lamination of paper, with the laminated web subsequently rewound onto a roll. For cold lamination, the film is coated with a water-based adhesive and dried using a heated roller with a hot air drying system. The unwinding system feeds the paper into the lamination section, where, through heat and roller pressure, the film is bonded to the paper. The rollers feature a heated water circulation system with consistent temperature control. The paper roll is secured by shafts controlled by a pneumatic brake. The paper is unwound and fed into a web aligner equipped with automatic web-guiding to ensure precise film lamination. During lamination, film without adhesive is coated with water-based glue and then dried by a heated cylinder, or pre-glued film is unwound directly onto the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is bonded to the film through heat and pressure, applied by the lower rubber roller that presses the paper and film against the cylinder. The laminated web is then rewound onto a core in the take-up section, ready for further downstream processing. SDFM-1100 Specifications Maximum roll width: 1100 mm Maximum roll diameter: 1100 mm Paper weight: 80 - 500 g/m² Film thickness: 10-50 microns Operating speed: 10 - 65 m/min Gbedpevy Aipsfx Abhjh Electric voltage: 380V 50Hz Total power: 78 kW Maximum energy consumption: 30 kW Total weight: 8,000 kg Machine dimensions: 10,130 × 2,130 × 2,960 mm

Kondisi: bekas, CNC milling machine ABENE type VHF-360TI Serial no. 36084 Year of manufacture 2008 CNC control HEIDENHAIN TNC 320 Travel distances X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle taper SK 40 Spindle speed 55 - 3000 rpm, 2 stages Feed rate 30 - 4000 mm/min, stepless Rapid traverse speed (X + Y axis) 4000 mm/min Rapid traverse speed (Z axis) 2000 mm/min Distance spindle nose to table 20-495 mm Spindle drive motor power 7.5 kW Power supply 400 Volt, 50 Hz - CNC path control HEIDENHAIN TNC 320 with RS232, USB, and LAN interfaces - Electronic handwheel Gsdpfx Abjty A Ehshobh - Mechanical handwheels for X and Y axis - Spindle speed manually switchable in 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with side-mounted swiveling spindle head +/- 50° - Inclined bed adjustment manual via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric coolant pump, positioned next to the machine - Machine lamp - Control cabinet mounted to the machine - Displayed control operating hours = 14,780 h - Displayed machine operating hours = 12,980 h - Displayed program run hours = 400 h Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg In very good condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 3.000 kg, panjang total: 25.400 mm, lebar total: 1.600 mm, tinggi total: 2.000 mm, daya: 165 kW (224,34 hp), laju aliran volumetrik: 1,56 m³/jam, tingkat kebisingan: 65 dB, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Continuously serviced, excellent condition. Atlas Copco ZR160 VSD Screw Compressor Equipped with variable speed drive, adsorption dryer MD400 included Compressor: Manufacturer: Atlas Copco Model: ZR 160 VSD Maximum operating pressure: 8.6 bar Variable speed drive Cooling water consumption: 2.1 liters/second Air delivery: 27 m³/min Water-cooled Oil-free Power: 163 kW Year of manufacture: 2002 Operating hours: 122,499 Last service: 20 September 2023 Gbjdpfern S Hpox Abhjh Adsorption Dryer: Manufacturer: Atlas Copco Model: MD 400 W Year of manufacture: 2002 Maximum operating pressure: 10.5 bar Empty volume: 199 liters

Kondisi: baru, Tahun pembuatan: 2025, Cutting diameter: 240 mm Saw blade length: 2910 x 27 x 0.9 mm Gjdpowa Ui Tofx Abhobh Cutting width: 310 mm Table height: 900 mm Cutting speed: 35 + 75 m/min Total power requirement: 1.1 / 1.8 kW Machine weight: approx. 470 kg Space requirement: approx. 800 x 1720 x 1450 mm Standard equipment of the MEBAbase 24 DG-HS: - MEBA mitering system: Large, swiveling table prevents the saw blade from cutting into the material support surface – resulting in low wear costs! The material is always clamped square to the saw blade. - Manual miter adjustment from 90° to 30°, stepless via scale with 1.0° accuracy - The miter pivot point is at the intersection between the saw blade and material support, therefore there is no change in length measurement when the angle changes - End stops at 30° - 45° - 90° - 45° - Hydraulic material clamping. The material is clamped parallel at 90° in any saw frame angle - Centralized machine operation - Cutting pressure reduction via the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section using a hydraulic damping cylinder and weight compensation spring - Saw blade drive with end stop - Stepless vise jaw adjustment - Adjustable movable blade guide arm for material width - Saw blade deflection pulleys with carbide guide - Practical chip collection tray with drip screen - Integrated chip cleaning brush - Mechanical saw blade tensioning - Operating instructions and spare parts list (digital) - 1 MEBA bimetal saw blade 4/6 TPI mounted on the machine - Complete coolant system - Paint finish anthracite (RAL 7016)

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, DYNAMIC WASHER Model ERFOR® DR8 Component device for washing lines for recycling ♻️ ♻️ ♻️ Gedpsuqlmzjfx Abhsbh Dynamic washers are machines used to wash moderately soiled and fragmented plastic waste such as: PP packaging, PVC, PET bottles, shredded big bags materials such as LLDPE, LDPE, HDPE, PP, PVC, PS, household chemical waste and many others. The washers offered by Koltex PRS are simple to operate and reliable devices, which can be configured into a more effective washing – dynamic cascade system (tandem – 2 x 30 kW, 2 x 55 kW, or 2 x 75 kW). Multi-point water dosing to the screen washers (cleaning system) and active dirt extraction ensure more efficient operation, while dynamic feed movement is made possible thanks to the rotating impeller blades. The extended screen section (1400 mm) considerably improves the washing quality, and the drainage of excess water is ensured by using an acid-resistant steel screen. The use of two screen segments provides improved maintenance. Model – DR8 Motor power [kW] – 30 / 55 / 75 kW Film drying capacity [kg/h] – 1000 / 1500 / 2000 kg/h Milled plastic drying capacity [kg/h] – 4500 kg/h Our offer also includes: • Complete plastic recycling systems • DWFS® washing lines • Granulation and extrusion lines For more information, please visit our website.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2001, Diameter pipa (maks.): 60 mm, daya: 1,85 kW (2,52 hp), I-beam, flat 100 x 15 (Ø 500) mm I-beam, upright 50 x 10 (Ø 500) mm Angle steel 50 x 6.0 (Ø 600) mm Round material 35.0 (Ø 500) mm Tube diameter max. 60 x 2.0 (Ø 1200) mm Square material 50x50x3 (Ø 1000) mm Bending speed 10.0 rpm Top roller diameter 165 mm Borehole 40.0 mm Dimensions (L x W x H) 560 x 1430 x 980 mm Adjustment range: top roller 124 mm Total power requirement 1.85 kW Weight 275 kg Low operating hours (!!) Manufacturer new price incl. accessories approx. 12,500 EUR Special price on request Equipment: - electro-hydraulic ring/profile bending machine - heavy-duty, robust machine body - 2x powered rolls (MR2 series) - segmented roller dies - digital position indicator for top roller (0.1 mm) - manual top roller adjustment - reversible bending roll operation (R/L run) - bending speed approx. 20% higher than other machines in its class - shafts made of forged & ground chrome-nickel steel - machine base frame - can be operated horizontally and vertically - mobile operator control panel Gbedpfswvrazox Abhoh - CE marking

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya,