Gergaji pita

MEBA MEBAbase 24 DG-HS

Cutting diameter: 240 mm
Saw blade length: 2910 x 27 x 0.9 mm
Cutting width: 310 mm
Table height: 900 mm
Cutting speed: 35 + 75 m/min
Total power requirement: 1.1 / 1.8 kW
Machine weight: approx. 470 kg
Space requirement: approx. 800 x 1720 x 1450 mm

Standard equipment of the MEBAbase 24 DG-HS:
- MEBA mitering system: Large, swiveling table prevents the saw blade from cutting into the material support surface – resulting in low wear costs! The material is always clamped square to the saw blade.
- Manual miter adjustment from 90° to 30°, stepless via scale with 1.0° accuracy
- The miter pivot point is at the intersection between the saw blade and material support, therefore there is no change in length measurement when the angle changes
- End stops at 30° - 45° - 90° - 45°
- Hydraulic material clamping. The material is clamped parallel at 90° in any saw frame angle
- Centralized machine operation
- Cutting pressure reduction via the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section using a hydraulic damping cylinder and weight compensation spring
- Saw blade drive with end stop
- Stepless vise jaw adjustment
- Adjustable movable blade guide arm for material width
- Saw blade deflection pulleys with carbide guide
- Practical chip collection tray with drip screen
- Integrated chip cleaning brush
- Mechanical saw blade tensioning
- Operating instructions and spare parts list (digital)
- 1 MEBA bimetal saw blade 4/6 TPI mounted on the machine
Fpedpfx Aswa Ui Tsfhsd
- Complete coolant system
- Paint finish anthracite (RAL 7016)

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.