Mesin hobbing gigi - horizontal

KOEPFER 170

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), Translation: Fodpfxorgahxj Abhopc Centre distance: 400–800 mm, Spindle speed: 1000–2700 rpm, Workpiece diameter: 10–300 mm, Grinding wheel diameter: 40–300 mm, Swivel angle: -45 to +45°, Length: 3000 mm, Width: 2500 mm, Height: 2275 mm; equipped with Hoffmann oil mist separator (new filter cartridges), Faudi gravity band filter unit, hydraulic power unit, additional grinding head for grinding worm gears, grinding arbors with diameters 50, 40, 27, 22 mm, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, electrical diagrams in paper format. Inspection possible.

Kondisi: sangat baik (bekas), FANUC 21i-T Steuerung Spitzenhöhe 175 mm Spitzenweite 1000 mm Schleifkopf B-Achse 1° Schleifscheibe 500 x 63 x 203 mm Schleifscheiben-Drehzahlen -1'500 U/min Fpsdpfx Ajyabt Dobhoc Innenschleifeinrichtung 60'000 U/Min Werkstückspindelstock C-Achse 0.001 ° Messtaster Automatische Auswuchtvorrichtung Abrichtgeräte Div. Zubehör MARCELS MASCHINEN AG

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, jarak gerak sumbu Z: 1.219 mm, kecepatan rotasi (maks.): 2.000 rpm, jarak pergerakan landasan silang: 203 mm, Flat bed lathe Manufacturer: Haas Model: TL-2 S/N: XXXXX Year of manufacture: 08-2005 Operating hours: n/a Control unit: Haas CNC Technical specifications: ----- - 4-position quick-change tool post, Parat system - Z-axis travel: 1,219 mm - X-axis travel: 203 mm - Swing over bed: 406 mm - Swing over cross slide: 282 mm Fpedpfx Abswftdmshec - Spindle bore: 76 mm - Spindle speeds: 10 - 2,000 rpm - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3x Parat toolholders - 3-jaw chuck - Documentation

Kondisi: bekas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Fpsdpju Uu S Tofx Abhsc Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 spm Feed range 0.008 – 0.4 mm/stroke Space requirement approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping on the table Change gears

Kondisi: bekas, Tahun pembuatan: 1961, Bärgewicht_750kg Fjdjvuullepfx Abhjpc

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. Fpedpfoqt Dmyex Abhoc When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 1.715 mm, lebar total: 735 mm, panjang total: 1.475 mm, daya: 3,3 kW (4,49 hp), berat keseluruhan: 3.300 kg, Palunya tempa dalam kondisi sangat baik dan dapat diuji dalam keadaan menyala kapan saja. Massa nominal bagian jatuh, kg: 75 Fpodpfxexwuv Ee Abhjc Energi pukul, kJ: 1,4 Jumlah pukulan maksimum per menit: 210 Jarak kerja (daylight), mm: 300 Ukuran cetakan dies, mm: 130 x 63 Daya motor, kW: 3,3 Dimensi palu, mm: 1475 x 735 x 1715 Berat palu dengan landasan, kg: 3300

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Maximum wheel diameter: 100 mm Wheel width: 26 mm Module – max.: 3 Module – min.: 0.1 Control: Siemens 840 D SL Operating hours: 9,598 h Total power requirement: 45 kW Machine weight: approx. 7 t Space requirement: approx. 4 x 3 x 2.5 m Gleason 100S Gear Shaping Machine For manufacturing cylindrical gears with internal and external teeth, as well as other regularly recurring profiles and shapes on cylindrical workpiece surfaces, including profiling in single-part processes. Technical Data: Nominal workpiece diameter: 100 mm Maximum outside diameter: 150 mm Nominal machine module: approx. 3 mm (Reference value, depending on the specific machining task.) Shaping spindle stroke range: 0–3,000 strokes/min Manual stroke position adjustment range: 20 mm Maximum gear width: 26 mm Fodpfx Abjv Ehbbehjpc Minimum hydrostatic diagonal guide pitch height: 400 mm Minimum/maximum distance between tool and workpiece axis: -20 / +180 mm Machine column tilt range (manual): -1° / +11° Tool holder (manual clamping): HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight: approx. 7,000 kg With robot cell

Kondisi: bekas, Tahun pembuatan: 2014, Workpiece length 100 mm Swing diameter 80 mm Number of spindles 2 Control FANUC 31i-B5 Workpiece weight 2.00 kg Center height 170 mm Grinding wheel diameter 100 mm Grinding wheel bore 32 mm Max. grinding wheel width 20 mm Max. circumferential speed 125 m/sec Steady rest passage 45 - 60 mm Fodpfx Abovx Uvfohepc Total power requirement 75.00 kW Machine weight approx. 25.00 t Space requirements approx. 5.00 x 3.50 x H3.50 m Camshaft grinding machine for cam blanks. Equipped with FANUC 31i-B5 control for non-circular grinding; loading gantry; CO2 extinguishing system; for CBN grinding wheel; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock variant 12 (two grinding spindles movable independently)

Kondisi: baik (bekas), Tahun pembuatan: 2011, LANDIS LT-2 ZWEI-SCHEIBEN CNC-ORBITALKURBELWELLENSCHLEIFMASCHINE Ausstattung: - Landis 6400 CNC-Steuerung - Siemens TOUCH HMI - Arobetech Lünetteneinrichtung - Marposs P7 Messeinrichtung - Seitlicher Positionsgeber - Zwei CBN-Schleifscheiben - Rotierender Abrichter Fedpfx Ajrtrxxebhopc - Spindelstock - Reitstock - Rittal Klimaanlagen Technische Daten: Maximaler Spitzenabstand: 680 mm