Pengering sentrifugal

Koltex Plastic Recycling Systems ERFOR® CR8

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, panjang rotor: 2.200 mm, kecepatan rotasi (min.): 58 rpm, berat keseluruhan: 30.000 kg, daya: 220 kW (299,12 hp), tegangan masuk: 400 V, 1 Dcedow Tk E Aspfx Aiuoh

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25-029, lebar total: 800 mm, panjang total: 4.700 mm, tinggi total: 1.900 mm, jenis arus masuk: tiga fasa, konsumsi energi: 2 kWh, Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material stream. Can be used before or after a non-ferrous separator (eddy current separator) or as a stand-alone machine. Capable of separating all metals from approx. 1 mm grain size. Suitable for material with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, available for inspection and testing. Camera option available on request! If the machine is too small, we also build larger versions. This is our demonstration unit. Maximum throughput depends on material and purpose. Dcodpfx Aijqabm Ejuoh Price negotiable!

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors. Dcedpfx Aevf E Avoiueh

Tahun pembuatan: 1993, Kondisi: sangat baik (bekas), 2 unit pompa sentrifugal Dsdpfxoibware Aiujch Produsen: KSB Model: WKF 50/7 Kapasitas aliran: 5,5 l/s (19,8 m³/jam) Tinggi tekan: 214 meter (21,4 bar) Suhu maksimum: 130°C Seal: Mechanical seal dengan koneksi air pembersih Motor listrik: VEM Daya penggerak: 30 kW Kecepatan putar: 2935 rpm ! Harga per unit !

Kondisi: siap digunakan (bekas), Bitzer Compressor Type: 60-70.2 Flow rate: 219.1 m³/h Cooling capacity: 143 kW at -5°C/+40°C, 118 kW at -10°C/+40°C, 77 kW at -20°C/+40°C Refrigerant: R404A Stock quantity: 3 units Stock number: S 75 Dodpfjh Dht Djx Aiusch Condition: Used, good We offer a wide range of other refrigeration equipment. Refrigeration units, compressors, evaporators, condensers, chillers, cold rooms, as well as refrigerated and catering furniture, and machines for restaurants and meat processing. Check our other listings or call us— not all items are listed on Machineseeker.

Kondisi: baik (bekas), Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling condensing unit, condenser, motor compressor, cooling machine, cooling unit Dsdpoguzr Hefx Aiuech -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 592 S -Power: 3 kW / 1,450 rpm -Displacement: 22.14 m³/h -Max. allowable pressure: 24.5 bar -Quantity: 2x cooling units available -Price: per unit -Dimensions: 550/315/H390 mm -Weight: 88 kg

Tahun pembuatan: 2014, Kondisi: perlu perbaikan (bekas), Fungsionalitas: berfungsi sepenuhnya, The machine has been out of use and stationary for several years, therefore it requires maintenance before being put back into service, which will be the responsibility of the buyer. Djdpfjtu U Ebex Aiuech

Kondisi: bekas, nomor mesin/kendaraan: 5063, System: Used Decanter / Centrifuge Manufacturer: KHD Model: Full Mantle Screw Centrifuge Type: CP 3-0.1 Machine No.: 5063 Max. permissible speed: 2,950 rpm Drum inner diameter: approx. 530 mm Drum wall thickness: 12.5 mm Drum material: W 2 Gearbox: internal hydraulic gearbox Hydraulic drive: Rotodiff and pump unit (Viscotherm, Pump Unit C11-25Z/HP) Total weight: 2,400 kg Dsdpeddzm Tjfx Aiuoch Purchase and rental possible.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 30.000 kg, diameter rotor: 800 mm, panjang rotor: 1.200 mm, daya: 250 kW (339,91 hp), universal-granulator-2025-en Djdow Am Nqopfx Aiujch

Kondisi: siap digunakan (bekas), Peripheral speed: 80 m/s, an on-site inspection is possible. Djdpfxorp E Nne Aiusch