Nosel kosmetik

Kosmetika- Düse

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Seven Arburg injection moulding machines are available: 1) Arburg 320C 600-250 Year of manufacture: 2001 Operating hours: 83,365 h Clamping force: 600 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 4,000 mm / 2,300 mm Including Multilift handling unit. 2) Arburg 420C 1000-250 Year of manufacture: 2001 Operating hours: 90,769 h Clamping force: 1,000 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 750 mm Platen gap: 750 mm Platen dimensions X/Y: 570 mm / 570 mm Tie bar spacing: 420 mm / 420 mm Core pulls: 2 Machine dimensions X/Y: approx. 4,700 mm / 2,350 mm Including Multilift handling unit. 3) Arburg 270C 300-100 Year of manufacture: 1999 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 1 Temperature control units: 6 Including Geiger handling unit. 4) Arburg 320C 300-100 Year of manufacture: 2000 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 125 mm / 110 mm Max. opening stroke: 350 mm Platen gap: 350 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 1 Temperature control units: 6 5) Arburg 220C 250-60 Year of manufacture: 2001 Operating hours: 86,595 h Clamping force: 250 kN Screw diameter: 22 mm Shot weight: 27 g Max. injection pressure: 2,340 bar Injection volume: 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 6) Arburg 270C 300-100 Year of manufacture: 2007 Operating hours: 59,885 h Clamping force: 300 kN Screw diameter: 20 mm Itjdpfxstyyn Hs Aahsr Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 3,750 mm / 2,400 mm Including Multilift handling unit. 7) Arburg 220S 250-60 Year of manufacture: 2001 Operating hours: 57,504 h Clamping force: 250 kN Screw diameter: 18 mm / 22 mm Shot weight: 18 g / 27 g Max. injection pressure: 2,500 bar / 2,340 bar Injection volume: 20 cm³ / 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 Machine dimensions X/Y: approx. 3,300 mm / 1,100 mm Documentation available. Inspection on site possible.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, 8x lids Canister closures Itjdpfx Aajh Rwlqjher Year approx. 2003

Kondisi: baru, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg EQUIPMENT HIGHLIGHTS: • Smart Controller Plus 7" touch / Industry 4.0 capable • Flow metering with adjustable flow alarms • Return temperature display • Frequency converter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector, 20mA/TTY • Connection for external PT100 temperature sensor for tool temperature measurement and display • Continuous bypass of the heat exchanger using a 3-way valve to reduce scaling in the heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Boost pump for system filling at high temperatures • Fill mode can be switched from cooling water to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. Iodsftm Hropfx Aahstr *This unit complies with European directives. Other directives and standards are fulfilled only if specifically stated in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Kondisi: bekas, Tahun pembuatan: 2008, Closure GL 18 Closure for medicine bottle, GL18 size Injection mold with 10 cavities Iedpfsdqbzqjx Aahstr

Kondisi: baik (bekas), Tahun pembuatan: 1994, Foldable latch Itedoc Nw N Nepfx Aahsr

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Five identical Arburg injection moulding machines are available. Clamping force: 800 kN, tie bar spacing: 420mm/420mm, mould height: 250mm, daylight: 700mm, nozzle diameter: 45mm, weight: approx. 3,800 kg, controller: Selogica 3.020. All machines come complete with temperature control units and conveyor belts. Documentation is available. The machines are currently in storage. On-site inspection is possible. Iodpfx Aaoviv Dfjhotr

Tahun pembuatan: 1999, Kondisi: bekas, TITAN ERBA 100x140 Itjdpfxjv E Hnto Aahsr PIASTRA PIKARD METTIFOGLIO ZENARI

Kondisi: baru, Drilling capacity in steel (diameter) 32 mm Throat 300 mm Drilling stroke 160 mm Itsdpfx Aaekahu Rehor Morse taper 4 MT Table: 460 x 460 mm Spindle speed 75 - 3200 rpm Motor power 1.5 kW Column diameter 125 mm Thread M16 ST60 Feed rate 0.10/0.18/0.26 mm/rev Dimensions 800 x 500 x 2200 mm Weight 350 kg Equipment/features: - Automatic drill feed (magnetic clutch) - Height-adjustable and tiltable table - Movable work table - Integrated coolant system - Powerful motor - 3 spindle feed levers - Safety guard with limit switch - Separate emergency stop - Integrated work light - Includes drill chuck 16 mm - B16 - Built-in automatic thread cutting.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, 5 Spritzgießformen mit THERMOPLAY Heißkanalsystemen (Italien) zu verkaufen. Die Formen wurden in Rumänien von der Firma MATPLAST SA gefertigt. Produkte – Zubehör für MDF-Sockelleisten aus Polystyrol und Polypropylen. Itsdjv Dx I Aepfx Aahjr Interessierten Parteien werden auf Anfrage weitere technische Details zur Verfügung gestellt.

Kondisi: bekas, Tahun pembuatan: 2004, jam operasional: 90.627 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 180 kN, diameter sekrup: 18 mm, For sale is an Arburg injection moulding machine, model 170U 180-70. The machine is fully functional and ready for immediate operation. Technical data: Year of manufacture: 2004 Operating hours: 90,627 h Cylinder diameter: Ø 18 mm Clamping force: 180 kN Needle shut-off: Pneumatic Cavity pressure sensor Transport and loading can be organised throughout Europe at an additional cost, if required. Prices plus VAT. Viewing possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or to get in touch, please visit our website. Iedsu Hqg Tepfx Aahstr